linux-kernel - [PATCH v4 07/11] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201026161005.5421-8-ioana.ciornei@nxp.com>
Date:   Mon, 26 Oct 2020 18:10:01 +0200
From:   Ioana Ciornei <ioana.ciornei@....com>
To:     shawnguo@...nel.org
Cc:     robh+dt@...nel.org, leoyang.li@....com, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH v4 07/11] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs

Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
associated PHY.

Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
Changes in v2:
 - none
Changes in v3:
 - none
Changes in v4:
 - move the phy-connection-type attribute to the ethernet node


 .../boot/dts/freescale/fsl-ls2088a-rdb.dts    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index f6b4d75a258b..6f4acb7a3528 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -22,3 +22,44 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac1 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy1: emdio1_phy@1 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x10>;
+	};
+	mdio1_phy2: emdio1_phy@2 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x11>;
+	};
+	mdio1_phy3: emdio1_phy@3 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x12>;
+	};
+	mdio1_phy4: emdio1_phy@4 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x13>;
+	};
+};
-- 
2.28.0