| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201026181528.163143-2-krzk@kernel.org>
Date: Mon, 26 Oct 2020 19:15:17 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh+dt@...nel.org>, Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Sylwester Nawrocki <snawrocki@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 2 +-
arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++----
arch/arm/boot/dts/exynos3250-rinato.dts | 8 ++++----
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 12887b3924af..04290ec4583a 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -76,7 +76,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index c1a68e612037..69451566945d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -34,10 +34,10 @@ firmware@...f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -197,7 +197,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index b55afaaa691e..a26e3e582a7e 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -38,10 +38,10 @@ firmware@...f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -267,7 +267,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
--
2.25.1
Powered by blists - more mailing lists