| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFpCBp1G3FsH3F737mrn3Hrt-daW8MsP-RTeuaS9MJUaWg@mail.gmail.com>
Date: Tue, 27 Oct 2020 13:17:59 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Rob Herring <robh@...nel.org>
Cc: DTML <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
linux-i2c@...r.kernel.org, linux-iio@...r.kernel.org,
Linux PM <linux-pm@...r.kernel.org>,
alsa-devel@...a-project.org,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
linux-mtd@...ts.infradead.org, linux-serial@...r.kernel.org,
Linux USB List <linux-usb@...r.kernel.org>
Subject: Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files
On Fri, 23 Oct 2020 at 21:23, Rob Herring <robh@...nel.org> wrote:
>
> Clean-up incorrect indentation, extra spaces, and missing EOF newline in
> schema files. Most of the clean-ups are for list indentation which
> should always be 2 spaces more than the preceding keyword.
>
> Found with yamllint (now integrated into the checks).
>
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: dri-devel@...ts.freedesktop.org
> Cc: linux-gpio@...r.kernel.org
> Cc: linux-i2c@...r.kernel.org
> Cc: linux-iio@...r.kernel.org
> Cc: linux-pm@...r.kernel.org
> Cc: alsa-devel@...a-project.org
> Cc: linux-mmc@...r.kernel.org
> Cc: linux-mtd@...ts.infradead.org
> Cc: linux-serial@...r.kernel.org
> Cc: linux-usb@...r.kernel.org
> Signed-off-by: Rob Herring <robh@...nel.org>
Acked-by: Ulf Hansson <ulf.hansson@...aro.org>
> ---
> .../display/bridge/toshiba,tc358775.yaml | 18 ++--
> .../display/panel/ilitek,ili9881c.yaml | 5 +-
> .../devicetree/bindings/eeprom/at25.yaml | 6 +-
> .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +-
> .../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +-
> .../bindings/iio/adc/adi,ad7291.yaml | 3 +-
> .../bindings/iio/adc/adi,ad7768-1.yaml | 3 +-
> .../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +-
> .../bindings/iio/adc/holt,hi8435.yaml | 2 +-
> .../interrupt-controller/ti,pruss-intc.yaml | 12 +--
> .../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +-
> .../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +-
> .../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++-
> .../pci/socionext,uniphier-pcie-ep.yaml | 18 ++--
> .../phy/socionext,uniphier-ahci-phy.yaml | 6 +-
> .../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++--
> .../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++---------
> .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +-
> .../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +-
> .../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++---
> .../bindings/power/reset/reboot-mode.yaml | 6 +-
> .../power/supply/ingenic,battery.yaml | 8 +-
> .../power/supply/summit,smb347-charger.yaml | 16 +--
> .../bindings/riscv/sifive-l2-cache.yaml | 4 +-
> .../devicetree/bindings/rng/imx-rng.yaml | 6 +-
> .../bindings/serial/fsl-imx-uart.yaml | 34 +++---
> .../bindings/sound/mchp,spdifrx.yaml | 4 +-
> .../bindings/sound/mchp,spdiftx.yaml | 4 +-
> .../bindings/sound/qcom,lpass-cpu.yaml | 40 +++----
> .../devicetree/bindings/timer/arm,sp804.yaml | 12 +--
> .../devicetree/bindings/usb/cdns,usb3.yaml | 4 +-
> .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +-
> .../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +-
> 33 files changed, 210 insertions(+), 206 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> index 31f085d8ab13..526bbd63924b 100644
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
> title: Toshiba TC358775 DSI to LVDS bridge bindings
>
> maintainers:
> - - Vinay Simha BN <simhavcs@...il.com>
> + - Vinay Simha BN <simhavcs@...il.com>
>
> description: |
> This binding supports DSI to LVDS bridge TC358775
> @@ -29,7 +29,7 @@ properties:
>
> vdd-supply:
> maxItems: 1
> - description: 1.2V LVDS Power Supply
> + description: 1.2V LVDS Power Supply
>
> vddio-supply:
> maxItems: 1
> @@ -77,13 +77,13 @@ properties:
> - port@1
>
> required:
> - - compatible
> - - reg
> - - vdd-supply
> - - vddio-supply
> - - stby-gpios
> - - reset-gpios
> - - ports
> + - compatible
> + - reg
> + - vdd-supply
> + - vddio-supply
> + - stby-gpios
> + - reset-gpios
> + - ports
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> index c60b3bd74337..b2fcec4f22fd 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> @@ -13,9 +13,8 @@ properties:
> compatible:
> items:
> - enum:
> - - bananapi,lhr050h41
> - - feixin,k101-im2byl02
> -
> + - bananapi,lhr050h41
> + - feixin,k101-im2byl02
> - const: ilitek,ili9881c
>
> backlight: true
> diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
> index 9810619a2b5c..744973637678 100644
> --- a/Documentation/devicetree/bindings/eeprom/at25.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
> @@ -81,14 +81,14 @@ properties:
> at25,byte-len:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> - Total eeprom size in bytes. Deprecated, use "size" property instead.
> + Total eeprom size in bytes. Deprecated, use "size" property instead.
> deprecated: true
>
> at25,addr-mode:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> - Addr-mode flags, as defined in include/linux/spi/eeprom.h.
> - Deprecated, use "address-width" property instead.
> + Addr-mode flags, as defined in include/linux/spi/eeprom.h.
> + Deprecated, use "address-width" property instead.
> deprecated: true
>
> at25,page-size:
> diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> index e2d2c10e536a..b032471831e7 100644
> --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
> @@ -43,8 +43,8 @@ properties:
> gpio-controller: true
>
> gpio-line-names:
> - minItems: 1
> - maxItems: 8
> + minItems: 1
> + maxItems: 8
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
> index 0e7b4b8a7e48..e1e65eb4f795 100644
> --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
> @@ -19,11 +19,11 @@ properties:
> compatible:
> oneOf:
> - enum:
> - - ingenic,jz4770-i2c
> - - ingenic,x1000-i2c
> + - ingenic,jz4770-i2c
> + - ingenic,x1000-i2c
> - items:
> - - const: ingenic,jz4780-i2c
> - - const: ingenic,jz4770-i2c
> + - const: ingenic,jz4780-i2c
> + - const: ingenic,jz4770-i2c
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
> index 6feafb7e531e..930f9e3904d7 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
> @@ -43,4 +43,5 @@ examples:
> vref-supply = <&adc_vref>;
> };
> };
> -...
> \ No newline at end of file
> +...
> +
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> index d3733ad8785a..8f32800fe5b7 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> @@ -46,7 +46,8 @@ properties:
> spi-max-frequency: true
>
> spi-cpol: true
> - spi-cpha : true
> +
> + spi-cpha: true
>
> "#io-channel-cells":
> const: 1
> diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
> index 5d92b477e23f..4e695b97d015 100644
> --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
> @@ -22,8 +22,8 @@ properties:
> adc-reserved-channels:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> - Bitmask of reserved channels, i.e. channels that cannot be
> - used by the OS.
> + Bitmask of reserved channels, i.e. channels that cannot be
> + used by the OS.
>
> clocks:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
> index 9514c3381c42..52490cbb0af0 100644
> --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
> @@ -21,7 +21,7 @@ properties:
>
> gpios:
> description:
> - GPIO used for controlling the reset pin
> + GPIO used for controlling the reset pin
> maxItems: 1
>
> spi-max-frequency: true
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> index bbf79d125675..1c4c009dedd0 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> @@ -94,12 +94,12 @@ properties:
> instances.
>
> required:
> - - compatible
> - - reg
> - - interrupts
> - - interrupt-names
> - - interrupt-controller
> - - "#interrupt-cells"
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - interrupt-controller
> + - "#interrupt-cells"
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
> index 074243c40891..08af356f5d27 100644
> --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
> @@ -17,7 +17,7 @@ properties:
> compatible:
> items:
> - enum:
> - - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
> + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
> - const: ene,kb3930
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> index 58fe9d02a781..0753289fba84 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> @@ -32,11 +32,11 @@ allOf:
> clock-output-names:
> oneOf:
> - items:
> - - const: clk_out_sd0
> - - const: clk_in_sd0
> + - const: clk_out_sd0
> + - const: clk_in_sd0
> - items:
> - - const: clk_out_sd1
> - - const: clk_in_sd1
> + - const: clk_out_sd1
> + - const: clk_in_sd1
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
> index ac79f3adf20b..2cd859066462 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
> @@ -3,7 +3,7 @@
> %YAML 1.2
> ---
> $id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
> -$schema : "http://devicetree.org/meta-schemas/core.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>
> title: TI AM654 MMC Controller
>
> @@ -163,13 +163,12 @@ properties:
> ti,driver-strength-ohm:
> description: DLL drive strength in ohms
> $ref: "/schemas/types.yaml#/definitions/uint32"
> - oneOf:
> - - enum:
> - - 33
> - - 40
> - - 50
> - - 66
> - - 100
> + enum:
> + - 33
> + - 40
> + - 50
> + - 66
> + - 100
>
> ti,strobe-sel:
> description: strobe select delay for HS400 speed mode.
> diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
> index f4292d2c54e3..d6cf8a560ef0 100644
> --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
> @@ -29,16 +29,16 @@ properties:
> reg-names:
> oneOf:
> - items:
> - - const: dbi
> - - const: dbi2
> - - const: link
> - - const: addr_space
> + - const: dbi
> + - const: dbi2
> + - const: link
> + - const: addr_space
> - items:
> - - const: dbi
> - - const: dbi2
> - - const: link
> - - const: addr_space
> - - const: atu
> + - const: dbi
> + - const: dbi2
> + - const: link
> + - const: addr_space
> + - const: atu
>
> clocks:
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> index bab2ff4d9dc9..34756347a14e 100644
> --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> @@ -31,10 +31,10 @@ properties:
> clock-names:
> oneOf:
> - items: # for PXs2
> - - const: link
> + - const: link
> - items: # for others
> - - const: link
> - - const: phy
> + - const: link
> + - const: phy
>
> resets:
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
> index 15207ca9548f..ab77a65c5c55 100644
> --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
> @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
> title: OMAP USB2 PHY
>
> maintainers:
> - - Kishon Vijay Abraham I <kishon@...com>
> - - Roger Quadros <rogerq@...com>
> + - Kishon Vijay Abraham I <kishon@...com>
> + - Roger Quadros <rogerq@...com>
>
> properties:
> compatible:
> oneOf:
> - items:
> - - enum:
> - - ti,dra7x-usb2
> - - ti,dra7x-usb2-phy2
> - - ti,am654-usb2
> - - enum:
> - - ti,omap-usb2
> + - enum:
> + - ti,dra7x-usb2
> + - ti,dra7x-usb2-phy2
> + - ti,am654-usb2
> + - enum:
> + - ti,omap-usb2
> - items:
> - - const: ti,am437x-usb2
> + - const: ti,am437x-usb2
> - items:
> - - const: ti,omap-usb2
> + - const: ti,omap-usb2
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> index 33391d30c00c..ccdd9e3820d7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> @@ -76,22 +76,22 @@ patternProperties:
> items:
> oneOf:
> - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
> - rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
> - rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
> - i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
> - ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
> - ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
> - dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
> - dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
> - spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
> - dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
> - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
> - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
> - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> - uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
> - pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
> - dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
> - nand_ceb3_mfp]
> + rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
> + rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
> + i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
> + ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
> + ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
> + dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
> + dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
> + spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
> + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
> + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
> + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
> + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
> + pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
> + dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
> + nand_ceb3_mfp]
> minItems: 1
> maxItems: 32
>
> @@ -100,10 +100,10 @@ patternProperties:
> Specify the alternative function to be configured for the
> given gpio pin groups.
> enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
> - sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
> - i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
> - p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
> - mipi_csi, nand, spdif, ts, lcd0]
> + sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
> + i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
> + p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
> + mipi_csi, nand, spdif, ts, lcd0]
>
> required:
> - groups
> @@ -126,14 +126,14 @@ patternProperties:
> items:
> oneOf:
> - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
> - rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
> - i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
> - lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
> - sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
> - spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
> - i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> - sens0_ckout_drv, uart3_all_drv]
> + rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
> + i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
> + lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
> + sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
> + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
> + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> + sens0_ckout_drv, uart3_all_drv]
> minItems: 1
> maxItems: 32
>
> @@ -144,29 +144,29 @@ patternProperties:
> items:
> oneOf:
> - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
> - eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
> - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
> - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
> - i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
> - ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
> - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
> - lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
> - lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
> - dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
> - dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
> - sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
> - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
> - uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> - sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
> - dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
> - uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
> - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
> - i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
> - csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
> - csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
> - dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
> - dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
> - pkg2, pkg3]
> + eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
> + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
> + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
> + i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
> + ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
> + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
> + lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
> + lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
> + dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
> + dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
> + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
> + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
> + uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> + sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
> + dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
> + uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
> + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
> + i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
> + csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
> + csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
> + dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
> + dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
> + pkg2, pkg3]
> minItems: 1
> maxItems: 64
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> index 5556def6b99b..c4c071211611 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> @@ -106,7 +106,7 @@ patternProperties:
> required:
> - pinmux
>
> - additionalProperties: false
> + additionalProperties: false
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> index 1f0f5757f9e1..040d2ada3669 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> @@ -71,9 +71,9 @@ patternProperties:
> Specify the alternative function to be configured for the specified
> pins. Functions are only valid for gpio pins.
> enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
> - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
> - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
> - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
> + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
> + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
> + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
>
> drive-strength:
> enum: [2, 4, 6, 8, 10, 12, 14, 16]
> diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> index d0d1a01140ea..9f1dab0c2430 100644
> --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> @@ -40,24 +40,24 @@ patternProperties:
> Function to mux.
> $ref: "/schemas/types.yaml#/definitions/string"
> enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
> - spi0, spi1, spi2, spi3, spi4, spi5, spi6,
> - uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
> + spi0, spi1, spi2, spi3, spi4, spi5, spi6,
> + uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
>
> groups:
> description:
> Name of the pin group to use for the functions.
> $ref: "/schemas/types.yaml#/definitions/string"
> enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
> - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
> - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
> - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
> - uart0_grp, uart1_grp, uart2_grp, uart3_grp,
> - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
> - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
> - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
> - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
> - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
> - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
> + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
> + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
> + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
> + uart0_grp, uart1_grp, uart2_grp, uart3_grp,
> + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
> + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
> + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
> + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
> + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
> + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
>
> drive-strength:
> enum: [2, 4, 6, 8, 16, 24, 32]
> diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
> index a6c91026d4cc..a2dca38577f7 100644
> --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
> @@ -28,9 +28,9 @@ description: |
>
> properties:
> mode-normal:
> - $ref: /schemas/types.yaml#/definitions/uint32
> - description: |
> - Default value to set on a reboot if no command was provided.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Default value to set on a reboot if no command was provided.
>
> patternProperties:
> "^mode-.*$":
> diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
> index 867e3e6b7e80..76c227a7cd5c 100644
> --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
> @@ -15,10 +15,10 @@ properties:
> oneOf:
> - const: ingenic,jz4740-battery
> - items:
> - - enum:
> - - ingenic,jz4725b-battery
> - - ingenic,jz4770-battery
> - - const: ingenic,jz4740-battery
> + - enum:
> + - ingenic,jz4725b-battery
> + - ingenic,jz4770-battery
> + - const: ingenic,jz4740-battery
>
> io-channels:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> index 193a23af2007..983fc215c1e5 100644
> --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
> @@ -84,12 +84,12 @@ allOf:
> then:
> properties:
> summit,mains-current-limit-microamp:
> - enum: [ 300000, 500000, 700000, 1000000,
> - 1500000, 1800000, 2000000]
> + enum: [ 300000, 500000, 700000, 1000000,
> + 1500000, 1800000, 2000000]
>
> summit,usb-current-limit-microamp:
> - enum: [ 300000, 500000, 700000, 1000000,
> - 1500000, 1800000, 2000000]
> + enum: [ 300000, 500000, 700000, 1000000,
> + 1500000, 1800000, 2000000]
>
> summit,charge-current-compensation-microamp:
> enum: [200000, 450000, 600000, 900000]
> @@ -97,12 +97,12 @@ allOf:
> else:
> properties:
> summit,mains-current-limit-microamp:
> - enum: [ 300000, 500000, 700000, 900000, 1200000,
> - 1500000, 1800000, 2000000, 2200000, 2500000]
> + enum: [ 300000, 500000, 700000, 900000, 1200000,
> + 1500000, 1800000, 2000000, 2200000, 2500000]
>
> summit,usb-current-limit-microamp:
> - enum: [ 300000, 500000, 700000, 900000, 1200000,
> - 1500000, 1800000, 2000000, 2200000, 2500000]
> + enum: [ 300000, 500000, 700000, 900000, 1200000,
> + 1500000, 1800000, 2000000, 2200000, 2500000]
>
> summit,charge-current-compensation-microamp:
> enum: [250000, 700000, 900000, 1200000]
> diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> index 3f4a1939554d..efc0198eeb74 100644
> --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> @@ -25,8 +25,8 @@ select:
> properties:
> compatible:
> items:
> - - enum:
> - - sifive,fu540-c000-ccache
> + - enum:
> + - sifive,fu540-c000-ccache
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml
> index 4ad1e456a801..07f6ff89bcc1 100644
> --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml
> +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml
> @@ -19,9 +19,9 @@ properties:
> - const: fsl,imx21-rnga
> - items:
> - enum:
> - - fsl,imx6sl-rngb
> - - fsl,imx6sll-rngb
> - - fsl,imx6ull-rngb
> + - fsl,imx6sl-rngb
> + - fsl,imx6sll-rngb
> + - fsl,imx6ull-rngb
> - const: fsl,imx25-rngb
> - const: fsl,imx35-rngc
>
> diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
> index 9ff85bc6859c..9702c07a6b6c 100644
> --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
> @@ -20,30 +20,30 @@ properties:
> - const: fsl,imx21-uart
> - items:
> - enum:
> - - fsl,imx25-uart
> - - fsl,imx27-uart
> - - fsl,imx31-uart
> - - fsl,imx35-uart
> - - fsl,imx50-uart
> - - fsl,imx51-uart
> - - fsl,imx53-uart
> - - fsl,imx6q-uart
> + - fsl,imx25-uart
> + - fsl,imx27-uart
> + - fsl,imx31-uart
> + - fsl,imx35-uart
> + - fsl,imx50-uart
> + - fsl,imx51-uart
> + - fsl,imx53-uart
> + - fsl,imx6q-uart
> - const: fsl,imx21-uart
> - items:
> - enum:
> - - fsl,imx6sl-uart
> - - fsl,imx6sll-uart
> - - fsl,imx6sx-uart
> + - fsl,imx6sl-uart
> + - fsl,imx6sll-uart
> + - fsl,imx6sx-uart
> - const: fsl,imx6q-uart
> - const: fsl,imx21-uart
> - items:
> - enum:
> - - fsl,imx6ul-uart
> - - fsl,imx7d-uart
> - - fsl,imx8mm-uart
> - - fsl,imx8mn-uart
> - - fsl,imx8mp-uart
> - - fsl,imx8mq-uart
> + - fsl,imx6ul-uart
> + - fsl,imx7d-uart
> + - fsl,imx8mm-uart
> + - fsl,imx8mn-uart
> + - fsl,imx8mp-uart
> + - fsl,imx8mq-uart
> - const: fsl,imx6q-uart
>
> reg:
> diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
> index 7d8bd4e14434..4a2129005c0f 100644
> --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
> +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
> @@ -10,8 +10,8 @@ maintainers:
> - Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
>
> description:
> - The Microchip Sony/Philips Digital Interface Receiver is a
> - serial port compliant with the IEC-60958 standard.
> + The Microchip Sony/Philips Digital Interface Receiver is a serial port
> + compliant with the IEC-60958 standard.
>
> properties:
> "#sound-dai-cells":
> diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
> index a03b0b871fc9..bdfb63387c53 100644
> --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
> +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
> @@ -10,8 +10,8 @@ maintainers:
> - Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
>
> description:
> - The Microchip Sony/Philips Digital Interface Transmitter is a
> - serial port compliant with the IEC-60958 standard.
> + The Microchip Sony/Philips Digital Interface Transmitter is a serial port
> + compliant with the IEC-60958 standard.
>
> properties:
> "#sound-dai-cells":
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> index f6f9fb49f385..1e23c0e20bc1 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> @@ -26,8 +26,10 @@ properties:
> reg:
> maxItems: 2
> description: LPAIF core registers
> +
> reg-names:
> - maxItems: 2
> + maxItems: 2
> +
> clocks:
> minItems: 3
> maxItems: 6
> @@ -39,8 +41,10 @@ properties:
> interrupts:
> maxItems: 2
> description: LPAIF DMA buffer interrupt
> +
> interrupt-names:
> maxItems: 2
> +
> qcom,adsp:
> $ref: /schemas/types.yaml#/definitions/phandle
> description: Phandle for the audio DSP node
> @@ -141,31 +145,31 @@ allOf:
> properties:
> clock-names:
> oneOf:
> - - items: #for I2S
> - - const: pcnoc-sway-clk
> - - const: audio-core
> - - const: mclk0
> - - const: pcnoc-mport-clk
> - - const: mi2s-bit-clk0
> - - const: mi2s-bit-clk1
> - - items: #for HDMI
> - - const: pcnoc-sway-clk
> - - const: audio-core
> - - const: pcnoc-mport-clk
> + - items: #for I2S
> + - const: pcnoc-sway-clk
> + - const: audio-core
> + - const: mclk0
> + - const: pcnoc-mport-clk
> + - const: mi2s-bit-clk0
> + - const: mi2s-bit-clk1
> + - items: #for HDMI
> + - const: pcnoc-sway-clk
> + - const: audio-core
> + - const: pcnoc-mport-clk
> reg-names:
> anyOf:
> - items: #for I2S
> - - const: lpass-lpaif
> + - const: lpass-lpaif
> - items: #for I2S and HDMI
> - - const: lpass-hdmiif
> - - const: lpass-lpaif
> + - const: lpass-hdmiif
> + - const: lpass-lpaif
> interrupt-names:
> anyOf:
> - items: #for I2S
> - - const: lpass-irq-lpaif
> + - const: lpass-irq-lpaif
> - items: #for I2S and HDMI
> - - const: lpass-irq-lpaif
> - - const: lpass-irq-hdmi
> + - const: lpass-irq-lpaif
> + - const: lpass-irq-hdmi
> required:
> - iommus
> - power-domains
> diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
> index e35d3053250a..960e2bd66a97 100644
> --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
> @@ -33,8 +33,8 @@ properties:
> compatible:
> items:
> - enum:
> - - arm,sp804
> - - hisilicon,sp804
> + - arm,sp804
> + - hisilicon,sp804
> - const: arm,primecell
>
> interrupts:
> @@ -58,11 +58,11 @@ properties:
> clock is used for all clock inputs.
> oneOf:
> - items:
> - - description: clock for timer 1
> - - description: clock for timer 2
> - - description: bus clock
> + - description: clock for timer 1
> + - description: clock for timer 2
> + - description: bus clock
> - items:
> - - description: unified clock for both timers and the bus
> + - description: unified clock for both timers and the bus
>
> clock-names: true
> # The original binding did not specify any clock names, and there is no
> diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> index ac20b98e9910..d6af2794d444 100644
> --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> @@ -44,8 +44,8 @@ properties:
> enum: [super-speed, high-speed, full-speed]
>
> phys:
> - minItems: 1
> - maxItems: 2
> + minItems: 1
> + maxItems: 2
>
> phy-names:
> minItems: 1
> diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
> index 5fe9e6211ba2..52ceb07294a3 100644
> --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
> @@ -17,7 +17,7 @@ description: |-
>
> properties:
> compatible:
> - const: ti,hd3ss3220
> + const: ti,hd3ss3220
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
> index 1aaf3e768c81..55adea827c34 100644
> --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
> +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
> @@ -15,10 +15,10 @@ properties:
> - const: fsl,imx21-owire
> - items:
> - enum:
> - - fsl,imx27-owire
> - - fsl,imx50-owire
> - - fsl,imx51-owire
> - - fsl,imx53-owire
> + - fsl,imx27-owire
> + - fsl,imx50-owire
> + - fsl,imx51-owire
> + - fsl,imx53-owire
> - const: fsl,imx21-owire
>
> reg:
> --
> 2.25.1
>
Powered by blists - more mailing lists