linux-kernel - [PATCH AUTOSEL 4.4 07/25] ath10k: fix VHT NSS calculation when STBC is enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201027001123.1027642-7-sashal@kernel.org>
Date:   Mon, 26 Oct 2020 20:11:05 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Sathishkumar Muruganandam <murugana@...eaurora.org>,
        Kalle Valo <kvalo@...eaurora.org>,
        Sasha Levin <sashal@...nel.org>, ath10k@...ts.infradead.org,
        linux-wireless@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 4.4 07/25] ath10k: fix VHT NSS calculation when STBC is enabled

From: Sathishkumar Muruganandam <murugana@...eaurora.org>

[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ]

When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.

Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.

Tested-on: QCA9984 10.4-3.10-00047

Signed-off-by: Sathishkumar Muruganandam <murugana@...eaurora.org>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index a65b5d7f59f44..47ac9aa986dcd 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -657,6 +657,7 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	u8 preamble = 0;
 	u8 group_id;
 	u32 info1, info2, info3;
+	u32 stbc, nsts_su;
 
 	info1 = __le32_to_cpu(rxd->ppdu_start.info1);
 	info2 = __le32_to_cpu(rxd->ppdu_start.info2);
@@ -700,11 +701,16 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 		   TODO check this */
 		bw = info2 & 3;
 		sgi = info3 & 1;
+		stbc = (info2 >> 3) & 1;
 		group_id = (info2 >> 4) & 0x3F;
 
 		if (GROUP_ID_IS_SU_MIMO(group_id)) {
 			mcs = (info3 >> 4) & 0x0F;
-			nss = ((info2 >> 10) & 0x07) + 1;
+			nsts_su = ((info2 >> 10) & 0x07);
+			if (stbc)
+				nss = (nsts_su >> 2) + 1;
+			else
+				nss = (nsts_su + 1);
 		} else {
 			/* Hardware doesn't decode VHT-SIG-B into Rx descriptor
 			 * so it's impossible to decode MCS. Also since
-- 
2.25.1