[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201027135546.663643908@linuxfoundation.org>
Date: Tue, 27 Oct 2020 14:54:13 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Marek Vasut <marex@...x.de>,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Patrice Chotard <patrice.chotard@...com>,
Patrick Delaunay <patrick.delaunay@...com>,
linux-stm32@...md-mailman.stormreply.com,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.8 510/633] ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
From: Marek Vasut <marex@...x.de>
[ Upstream commit 9ad98319e95263469d8ca2cb543c37c5a2f40980 ]
On the production revision of the SoM, 587-200, the PHY reset GPIO and
touchscreen IRQs are swapped to prevent collision between EXTi IRQs,
reflect that in DT.
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@...x.de>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Patrice Chotard <patrice.chotard@...com>
Cc: Patrick Delaunay <patrick.delaunay@...com>
Cc: linux-stm32@...md-mailman.stormreply.com
To: linux-arm-kernel@...ts.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@...com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index d30a3c60da9b0..a87ebc4843963 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -117,7 +117,7 @@ ðernet0 {
max-speed = <100>;
phy-handle = <&phy0>;
st,eth-ref-clk-sel;
- phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
mdio0 {
#address-cells = <1>;
@@ -285,7 +285,7 @@ touchscreen@49 {
compatible = "ti,tsc2004";
reg = <0x49>;
vio-supply = <&v3v3>;
- interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>;
};
eeprom@50 {
--
2.25.1
Powered by blists - more mailing lists