| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201027135504.124705301@linuxfoundation.org>
Date: Tue, 27 Oct 2020 14:48:59 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.9 289/757] net: dsa: rtl8366: Refactor VLAN/PVID init
From: Linus Walleij <linus.walleij@...aro.org>
[ Upstream commit 7e1301ed1881447d2a25f9c6423738c33cbca133 ]
The VLANs and PVIDs on the RTL8366 utilizes a "member
configuration" (MC) which is largely unexplained in the
code.
This set-up requires a special ordering: rtl8366_set_pvid()
must be called first, followed by rtl8366_set_vlan(),
else the MC will not be properly allocated. Relax this
by factoring out the code obtaining an MC and reuse
the helper in both rtl8366_set_pvid() and
rtl8366_set_vlan() so we remove this strict ordering
requirement.
In the process, add some better comments and debug prints
so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/dsa/realtek-smi-core.h | 4 +-
drivers/net/dsa/rtl8366.c | 273 +++++++++++++++--------------
2 files changed, 146 insertions(+), 131 deletions(-)
diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index 9a63b51e1d82f..6f2dab7e33d65 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -25,6 +25,9 @@ struct rtl8366_mib_counter {
const char *name;
};
+/**
+ * struct rtl8366_vlan_mc - Virtual LAN member configuration
+ */
struct rtl8366_vlan_mc {
u16 vid;
u16 untag;
@@ -119,7 +122,6 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi);
int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
u32 untag, u32 fid);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
unsigned int vid);
int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index f75a660fcb620..bd3c947976ce0 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -36,12 +36,110 @@ int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
}
EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+/**
+ * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
+ * @smi: the Realtek SMI device instance
+ * @vid: the VLAN ID to look up or allocate
+ * @vlanmc: the pointer will be assigned to a pointer to a valid member config
+ * if successful
+ * @return: index of a new member config or negative error number
+ */
+static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid,
+ struct rtl8366_vlan_mc *vlanmc)
+{
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+ int i;
+
+ /* Try to find an existing member config entry for this VID */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vid == vlanmc->vid)
+ return i;
+ }
+
+ /* We have no MC entry for this VID, try to find an empty one */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vlanmc->vid == 0 && vlanmc->member == 0) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret) {
+ dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ dev_dbg(smi->dev, "created new MC at index %d for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ /* MC table is full, try to find an unused entry and replace it */
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ int used;
+
+ ret = rtl8366_mc_is_used(smi, i, &used);
+ if (ret)
+ return ret;
+
+ if (!used) {
+ /* Update the entry from the 4K table */
+ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
+ if (ret) {
+ dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+ dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ dev_err(smi->dev, "all VLAN member configurations are in use\n");
+ return -ENOSPC;
+}
+
int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
u32 untag, u32 fid)
{
+ struct rtl8366_vlan_mc vlanmc;
struct rtl8366_vlan_4k vlan4k;
+ int mc;
int ret;
- int i;
if (!smi->ops->is_vlan_valid(smi, vid))
return -EINVAL;
@@ -66,136 +164,58 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
vid, vlan4k.member, vlan4k.untag);
- /* Try to find an existing MC entry for this VID */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- struct rtl8366_vlan_mc vlanmc;
-
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vid == vlanmc.vid) {
- /* update the MC entry */
- vlanmc.member |= member;
- vlanmc.untag |= untag;
- vlanmc.fid = fid;
-
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
- dev_dbg(smi->dev,
- "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
- vid, vlanmc.member, vlanmc.untag);
+ /* Update the MC entry */
+ vlanmc.member |= member;
+ vlanmc.untag |= untag;
+ vlanmc.fid = fid;
- break;
- }
- }
+ /* Commit updates to the MC entry */
+ ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc);
+ if (ret)
+ dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
+ mc, vid);
+ else
+ dev_dbg(smi->dev,
+ "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
+ vid, vlanmc.member, vlanmc.untag);
return ret;
}
EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val)
-{
- struct rtl8366_vlan_mc vlanmc;
- int ret;
- int index;
-
- ret = smi->ops->get_mc_index(smi, port, &index);
- if (ret)
- return ret;
-
- ret = smi->ops->get_vlan_mc(smi, index, &vlanmc);
- if (ret)
- return ret;
-
- *val = vlanmc.vid;
- return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_get_pvid);
-
int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
unsigned int vid)
{
struct rtl8366_vlan_mc vlanmc;
- struct rtl8366_vlan_4k vlan4k;
+ int mc;
int ret;
- int i;
if (!smi->ops->is_vlan_valid(smi, vid))
return -EINVAL;
- /* Try to find an existing MC entry for this VID */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vid == vlanmc.vid) {
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
- }
-
- /* We have no MC entry for this VID, try to find an empty one */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- if (vlanmc.vid == 0 && vlanmc.member == 0) {
- /* Update the entry from the 4K table */
- ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
- if (ret)
- return ret;
-
- vlanmc.vid = vid;
- vlanmc.member = vlan4k.member;
- vlanmc.untag = vlan4k.untag;
- vlanmc.fid = vlan4k.fid;
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
-
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
- }
-
- /* MC table is full, try to find an unused entry and replace it */
- for (i = 0; i < smi->num_vlan_mc; i++) {
- int used;
-
- ret = rtl8366_mc_is_used(smi, i, &used);
- if (ret)
- return ret;
-
- if (!used) {
- /* Update the entry from the 4K table */
- ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
- if (ret)
- return ret;
-
- vlanmc.vid = vid;
- vlanmc.member = vlan4k.member;
- vlanmc.untag = vlan4k.untag;
- vlanmc.fid = vlan4k.fid;
- ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
- if (ret)
- return ret;
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
- ret = smi->ops->set_mc_index(smi, port, i);
- return ret;
- }
+ ret = smi->ops->set_mc_index(smi, port, mc);
+ if (ret) {
+ dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n",
+ mc, port);
+ return ret;
}
- dev_err(smi->dev,
- "all VLAN member configurations are in use\n");
+ dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
+ port, vid, mc);
- return -ENOSPC;
+ return 0;
}
EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
@@ -395,7 +415,8 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
if (!smi->ops->is_vlan_valid(smi, vid))
return;
- dev_info(smi->dev, "add VLAN on port %d, %s, %s\n",
+ dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
+ vlan->vid_begin,
port,
untagged ? "untagged" : "tagged",
pvid ? " PVID" : "no PVID");
@@ -404,34 +425,26 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port,
dev_err(smi->dev, "port is DSA or CPU port\n");
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
- int pvid_val = 0;
-
- dev_info(smi->dev, "add VLAN %04x\n", vid);
member |= BIT(port);
if (untagged)
untag |= BIT(port);
- /* To ensure that we have a valid MC entry for this VLAN,
- * initialize the port VLAN ID here.
- */
- ret = rtl8366_get_pvid(smi, port, &pvid_val);
- if (ret < 0) {
- dev_err(smi->dev, "could not lookup PVID for port %d\n",
- port);
- return;
- }
- if (pvid_val == 0) {
- ret = rtl8366_set_pvid(smi, port, vid);
- if (ret < 0)
- return;
- }
-
ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
if (ret)
dev_err(smi->dev,
"failed to set up VLAN %04x",
vid);
+
+ ret = rtl8366_set_pvid(smi, port, vid);
+ if (ret)
+ dev_err(smi->dev,
+ "failed to set PVID on port %d to VLAN %04x",
+ port, vid);
+
+ if (!ret)
+ dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n",
+ vid, port);
}
}
EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
--
2.25.1
Powered by blists - more mailing lists