| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201026234905.1022767-118-sashal@kernel.org>
Date: Mon, 26 Oct 2020 19:48:36 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: changfengnan <fengnanchang@...mail.com>,
kernel test robot <lkp@...el.com>,
Andreas Dilger <adilger@...ger.ca>,
Fengnan Chang <changfengnan@...vision.com>,
Jan Kara <jack@...e.cz>, Theodore Ts'o <tytso@....edu>,
Sasha Levin <sashal@...nel.org>, linux-ext4@...r.kernel.org
Subject: [PATCH AUTOSEL 5.9 118/147] jbd2: avoid transaction reuse after reformatting
From: changfengnan <fengnanchang@...mail.com>
[ Upstream commit fc750a3b44bdccb9fb96d6abbc48a9b8e480ce7b ]
When ext4 is formatted with lazy_journal_init=1 and transactions from
the previous filesystem are still on disk, it is possible that they are
considered during a recovery after a crash. Because the checksum seed
has changed, the CRC check will fail, and the journal recovery fails
with checksum error although the journal is otherwise perfectly valid.
Fix the problem by checking commit block time stamps to determine
whether the data in the journal block is just stale or whether it is
indeed corrupt.
Reported-by: kernel test robot <lkp@...el.com>
Reviewed-by: Andreas Dilger <adilger@...ger.ca>
Signed-off-by: Fengnan Chang <changfengnan@...vision.com>
Signed-off-by: Jan Kara <jack@...e.cz>
Link: https://lore.kernel.org/r/20201012164900.20197-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@....edu>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
fs/jbd2/recovery.c | 78 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 66 insertions(+), 12 deletions(-)
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index faa97d748474d..fb134c7a12c89 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -428,6 +428,8 @@ static int do_one_pass(journal_t *journal,
__u32 crc32_sum = ~0; /* Transactional Checksums */
int descr_csum_size = 0;
int block_error = 0;
+ bool need_check_commit_time = false;
+ __u64 last_trans_commit_time = 0, commit_time;
/*
* First thing is to establish what we expect to find in the log
@@ -520,12 +522,21 @@ static int do_one_pass(journal_t *journal,
if (descr_csum_size > 0 &&
!jbd2_descriptor_block_csum_verify(journal,
bh->b_data)) {
- printk(KERN_ERR "JBD2: Invalid checksum "
- "recovering block %lu in log\n",
- next_log_block);
- err = -EFSBADCRC;
- brelse(bh);
- goto failed;
+ /*
+ * PASS_SCAN can see stale blocks due to lazy
+ * journal init. Don't error out on those yet.
+ */
+ if (pass != PASS_SCAN) {
+ pr_err("JBD2: Invalid checksum recovering block %lu in log\n",
+ next_log_block);
+ err = -EFSBADCRC;
+ brelse(bh);
+ goto failed;
+ }
+ need_check_commit_time = true;
+ jbd_debug(1,
+ "invalid descriptor block found in %lu\n",
+ next_log_block);
}
/* If it is a valid descriptor block, replay it
@@ -535,6 +546,7 @@ static int do_one_pass(journal_t *journal,
if (pass != PASS_REPLAY) {
if (pass == PASS_SCAN &&
jbd2_has_feature_checksum(journal) &&
+ !need_check_commit_time &&
!info->end_transaction) {
if (calc_chksums(journal, bh,
&next_log_block,
@@ -683,11 +695,41 @@ static int do_one_pass(journal_t *journal,
* mentioned conditions. Hence assume
* "Interrupted Commit".)
*/
+ commit_time = be64_to_cpu(
+ ((struct commit_header *)bh->b_data)->h_commit_sec);
+ /*
+ * If need_check_commit_time is set, it means we are in
+ * PASS_SCAN and csum verify failed before. If
+ * commit_time is increasing, it's the same journal,
+ * otherwise it is stale journal block, just end this
+ * recovery.
+ */
+ if (need_check_commit_time) {
+ if (commit_time >= last_trans_commit_time) {
+ pr_err("JBD2: Invalid checksum found in transaction %u\n",
+ next_commit_ID);
+ err = -EFSBADCRC;
+ brelse(bh);
+ goto failed;
+ }
+ ignore_crc_mismatch:
+ /*
+ * It likely does not belong to same journal,
+ * just end this recovery with success.
+ */
+ jbd_debug(1, "JBD2: Invalid checksum ignored in transaction %u, likely stale data\n",
+ next_commit_ID);
+ err = 0;
+ brelse(bh);
+ goto done;
+ }
- /* Found an expected commit block: if checksums
- * are present verify them in PASS_SCAN; else not
+ /*
+ * Found an expected commit block: if checksums
+ * are present, verify them in PASS_SCAN; else not
* much to do other than move on to the next sequence
- * number. */
+ * number.
+ */
if (pass == PASS_SCAN &&
jbd2_has_feature_checksum(journal)) {
struct commit_header *cbh =
@@ -719,6 +761,8 @@ static int do_one_pass(journal_t *journal,
!jbd2_commit_block_csum_verify(journal,
bh->b_data)) {
chksum_error:
+ if (commit_time < last_trans_commit_time)
+ goto ignore_crc_mismatch;
info->end_transaction = next_commit_ID;
if (!jbd2_has_feature_async_commit(journal)) {
@@ -728,11 +772,24 @@ static int do_one_pass(journal_t *journal,
break;
}
}
+ if (pass == PASS_SCAN)
+ last_trans_commit_time = commit_time;
brelse(bh);
next_commit_ID++;
continue;
case JBD2_REVOKE_BLOCK:
+ /*
+ * Check revoke block crc in pass_scan, if csum verify
+ * failed, check commit block time later.
+ */
+ if (pass == PASS_SCAN &&
+ !jbd2_descriptor_block_csum_verify(journal,
+ bh->b_data)) {
+ jbd_debug(1, "JBD2: invalid revoke block found in %lu\n",
+ next_log_block);
+ need_check_commit_time = true;
+ }
/* If we aren't in the REVOKE pass, then we can
* just skip over this block. */
if (pass != PASS_REVOKE) {
@@ -800,9 +857,6 @@ static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
offset = sizeof(jbd2_journal_revoke_header_t);
rcount = be32_to_cpu(header->r_count);
- if (!jbd2_descriptor_block_csum_verify(journal, header))
- return -EFSBADCRC;
-
if (jbd2_journal_has_csum_v2or3(journal))
csum_size = sizeof(struct jbd2_journal_block_tail);
if (rcount > journal->j_blocksize - csum_size)
--
2.25.1
Powered by blists - more mailing lists