| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <786750c7-595f-2954-5382-78005c71ade0@microchip.com>
Date: Tue, 27 Oct 2020 17:19:01 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <masonccyang@...c.com.tw>, <broonie@...nel.org>,
<miquel.raynal@...tlin.com>, <richard@....at>, <vigneshr@...com>,
<boris.brezillon@...labora.com>, <matthias.bgg@...il.com>
CC: <juliensu@...c.com.tw>, <linux-kernel@...r.kernel.org>,
<linux-spi@...r.kernel.org>, <linux-mtd@...ts.infradead.org>,
<p.yadav@...com>, <ycllin@...c.com.tw>
Subject: Re: [PATCH v4 2/7] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
Hi, Mason, YC Lin,
On 5/29/20 10:36 AM, Mason Yang wrote:
> JESD251, xSPI profile 1.0 table supports octal DTR mode.
> Extract information like the fast read opcode, dummy cycles for various
> frequencies, the number of dummy cycles needed for a Read Status
> Register command, the number of address bytes needed for a Read
> Status Register command, read volatile register command and write
> volatile register command.
>
> According to BFPT 20th DWORD of octal maximum speed, driver get it's
> specific dummy cycles from profile 1.0 table and then could update
> it to device by their fixup hooks.
>
> Since driver get octal DTR read opcode and then set read settings,
> expose spi_nor_set_read_settings() in core.h.
>
> Signed-off-by: Mason Yang <masonccyang@...c.com.tw>
> ---
> drivers/mtd/spi-nor/core.c | 2 +-
> drivers/mtd/spi-nor/core.h | 16 +++++++
> drivers/mtd/spi-nor/sfdp.c | 106 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 123 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 1ab4386..3799417 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2204,7 +2204,7 @@ static int spi_nor_check(struct spi_nor *nor)
> return 0;
> }
>
> -static void
> +void
> spi_nor_set_read_settings(struct spi_nor_read_command *read,
> u8 num_mode_clocks,
> u8 num_wait_states,
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 7a36b22..a33f807 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -191,6 +191,12 @@ struct spi_nor_locking_ops {
> * @size: the flash memory density in bytes.
> * @page_size: the page size of the SPI NOR flash memory.
> * @octal_max_speed: maximum operation speed of device in octal mode.
> + * @rdsr_dummy: dummy cycles needed for Read Status Register command.
> + * @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register
> + * command.
> + * @rd_reg_cmd: read volatile register command for xSPI device.
> + * @wr_reg_cmd: write volatile register command for xSPI device.
Can all the volatile registers be accessed with these commands?
The profile1.0 table lacks description.
> + * @dummy_cycles: dummy cycles used for various frequencies
> * @hwcaps: describes the read and page program hardware
> * capabilities.
> * @reads: read capabilities ordered by priority: the higher index
> @@ -214,6 +220,11 @@ struct spi_nor_flash_parameter {
> u64 size;
> u32 page_size;
> u16 octal_max_speed;
> + u8 rdsr_dummy;
> + u8 rdsr_addr_nbytes;
> + u8 rd_reg_cmd;
> + u8 wr_reg_cmd;
> + u8 dummy_cycles;
>
> struct spi_nor_hwcaps hwcaps;
> struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
> @@ -420,6 +431,11 @@ ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
>
> int spi_nor_hwcaps_read2cmd(u32 hwcaps);
> u8 spi_nor_convert_3to4_read(u8 opcode);
> +void spi_nor_set_read_settings(struct spi_nor_read_command *read,
> + u8 num_mode_clocks,
> + u8 num_wait_states,
> + u8 opcode,
> + enum spi_nor_protocol proto);
> void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
> enum spi_nor_protocol proto);
>
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index 4d13f66..27a4de4 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -20,6 +20,7 @@
> #define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
> #define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
> #define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
> +#define SFDP_PROFILE1_ID 0xff05 /* xSPI Profile 1.0 table. */
>
> #define SFDP_SIGNATURE 0x50444653U
> #define SFDP_JESD216_MAJOR 1
> @@ -27,6 +28,27 @@
> #define SFDP_JESD216A_MINOR 5
> #define SFDP_JESD216B_MINOR 6
>
> +/* xSPI Profile 1.0 table (from JESD216D.01). */
> +#define XSPI_PF1_DWORD1_RD_CMD GENMASK(15, 8)
> +#define XSPI_PF1_DWORD1_RDSR_ADDR_BYTES BIT(29)
> +#define XSPI_PF1_DWORD1_RDSR_DUMMY_CYCLES BIT(28)
> +#define XSPI_PF1_DWORD2_RD_REG_CMD GENMASK(31, 24)
> +#define XSPI_PF1_DWORD2_WR_REG_CMD GENMASK(15, 8)
> +#define XSPI_PF1_DUMMY_CYCLES_DEFAULT 20
> +#define XSPI_DWORD(x) ((x) - 1)
> +#define XSPI_DWORD_MAX 5
> +
> +struct sfdp_xspi {
> + u32 dwords[XSPI_DWORD_MAX];
> +};
> +
> +struct xspi_dummy_cycles {
> + u16 speed_hz; /* Speed MHz */
> + u8 dwords; /* Dwords index */
> + u32 mask; /* Mask */
> + u8 shift; /* Bit shift */
> +};
> +
> /* Basic Flash Parameter Table 20th DWORD, Max operation speed of device */
> struct octal_max_speed {
> u8 idx; /* Bits value */
> @@ -1117,6 +1139,86 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
> }
>
> /**
> + * spi_nor_parse_profile1() - parse the xSPI Profile 1.0 table
> + * @nor: pointer to a 'struct spi_nor'
> + * @param_header: xspi profile 1 parameter table header
> + * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_parse_profile1(struct spi_nor *nor,
> + const struct sfdp_parameter_header *header,
> + struct spi_nor_flash_parameter *params)
> +{
> + struct sfdp_xspi pfile1;
> + u8 opcode;
> + u32 i, addr;
> + size_t len;
> + int ret;
> + static const struct xspi_dummy_cycles dummy[] = {
> + /* {MHz, Dwords index, Mask, Bit shift} */
> + { 200, 4, GENMASK(11, 7), 7},
> + { 166, 5, GENMASK(31, 27), 27},
> + { 133, 5, GENMASK(21, 17), 17},
> + { 100, 5, GENMASK(11, 7), 7},
> + };
> +
> + if (header->major != SFDP_JESD216_MAJOR ||
> + header->length < XSPI_DWORD_MAX)
> + return -EINVAL;
> +
> + len = min_t(size_t, sizeof(pfile1),
> + header->length * sizeof(u32));
> +
> + memset(&pfile1, 0, sizeof(pfile1));
> +
> + addr = SFDP_PARAM_HEADER_PTP(header);
> + ret = spi_nor_read_sfdp(nor, addr, len, &pfile1);
> + if (ret)
> + goto out;
> +
> + /* Fix endianness of the xSPI 1.0 DWORDs. */
> + le32_to_cpu_array(pfile1.dwords, XSPI_DWORD_MAX);
> +
> + /* Get 8D-8D-8D fast read opcode and dummy cycles. */
> + opcode = FIELD_GET(XSPI_PF1_DWORD1_RD_CMD,
> + pfile1.dwords[XSPI_DWORD(1)]);
> +
> + if (pfile1.dwords[XSPI_DWORD(1)] & XSPI_PF1_DWORD1_RDSR_ADDR_BYTES)
> + params->rdsr_addr_nbytes = 4;
> + else
> + params->rdsr_addr_nbytes = 0;
> +
> + if (pfile1.dwords[XSPI_DWORD(1)] & XSPI_PF1_DWORD1_RDSR_DUMMY_CYCLES)
> + params->rdsr_dummy = 8;
> + else
> + params->rdsr_dummy = 4;
> +
> + params->rd_reg_cmd = FIELD_GET(XSPI_PF1_DWORD2_RD_REG_CMD,
> + pfile1.dwords[XSPI_DWORD(2)]);
> + params->wr_reg_cmd = FIELD_GET(XSPI_PF1_DWORD2_WR_REG_CMD,
> + pfile1.dwords[XSPI_DWORD(2)]);
> +
> + /* according to BFPT 20th DOWRD to get devices dummy cycles */
> + for (i = 0; i < ARRAY_SIZE(dummy); i++) {
> + if (params->octal_max_speed == dummy[i].speed_hz) {
Why do you introduced this restriction? The dummy cycles fields themselves
can be used to determine if a speed is supported or not. A value different
than zero for the dummy cycles fields means that the corresponding frequency
is supported.
Cheers,
ta
> + params->dummy_cycles = (dummy[i].mask &
> + pfile1.dwords[XSPI_DWORD(dummy[i].dwords)]) >>
> + dummy[i].shift;
> + break;
> + }
> + }
> + if (i == ARRAY_SIZE(dummy))
> + params->dummy_cycles = XSPI_PF1_DUMMY_CYCLES_DEFAULT;
> +
> + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_8_8_8_DTR],
> + 0, params->dummy_cycles,
> + opcode, SNOR_PROTO_8_8_8_DTR);
> +out:
> + return ret;
> +}
> +
> +/**
> * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
> * @nor: pointer to a 'struct spi_nor'
> * @params: pointer to the 'struct spi_nor_flash_parameter' to be
> @@ -1217,6 +1319,10 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
> err = spi_nor_parse_4bait(nor, param_header, params);
> break;
>
> + case SFDP_PROFILE1_ID:
> + err = spi_nor_parse_profile1(nor, param_header, params);
> + break;
> +
> default:
> break;
> }
>
Powered by blists - more mailing lists