[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201027100536.cpfizc67gwrolp2z@falbala.internal.home.lespocky.de>
Date: Tue, 27 Oct 2020 11:05:38 +0100
From: Alexander Dahl <post@...pocky.de>
To: Ahmad Fatoum <a.fatoum@...gutronix.de>
Cc: Alexander Dahl <post@...pocky.de>, Pavel Machek <pavel@....cz>,
Dan Murphy <dmurphy@...com>, Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
Alexander Dahl <ada@...rsis.com>, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
linux-amlogic@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-leds@...r.kernel.org
Subject: Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema
warnings for pwm-leds
Hello Ahmad,
thanks for your feedback, comments below.
On Tue, Oct 27, 2020 at 08:03:40AM +0100, Ahmad Fatoum wrote:
> Hello Alexander,
>
> On 10/5/20 10:34 PM, Alexander Dahl wrote:
> > The node names for devices using the pwm-leds driver follow a certain
> > naming scheme (now). Parent node name is not enforced, but recommended
> > by DT project.
> >
> > DTC arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> > CHECK arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> > /home/alex/build/linux/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml: led-rgb: 'led-blue', 'led-green', 'led-red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
> > From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> >
> > Signed-off-by: Alexander Dahl <post@...pocky.de>
>
> Acked-by: Ahmad Fatoum <a.fatoum@...gutronix.de>
>
> But got two questions below:
>
> > ---
> >
> > Notes:
> > v6 -> v7:
> > * split up patch (one per sub arch)
> > * added actual warnings to commit message
> >
> > arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> > index 5700e6b700d3..25d548cb975b 100644
> > --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> > +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> > @@ -36,34 +36,34 @@
> > stdout-path = &uart4;
> > };
> >
> > - led-act {
> > + led-controller-1 {
> > compatible = "gpio-leds";
> >
> > - led-green {
> > + led-1 {
> > label = "mc1:green:act";
> > gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
> > linux,default-trigger = "heartbeat";
> > };
> > };
> >
> > - led-rgb {
> > + led-controller-2 {
>
> Is a single RGB LED really a controller?
I just followed the recommendations by Rob here.
> > compatible = "pwm-leds";
> >
> > - led-red {
> > + led-2 {
>
> Shouldn't this have been led-1 as well or is the numbering "global" ?
Also good question. This numbering is for dts only, it usually does
not correspond with LEDs on the board, so it could be numbered per
led-controller as well?
Greets
Alex
>
> > label = "mc1:red:rgb";
> > pwms = <&leds_pwm 1 1000000 0>;
> > max-brightness = <255>;
> > active-low;
> > };
> >
> > - led-green {
> > + led-3 {
> > label = "mc1:green:rgb";
> > pwms = <&leds_pwm 2 1000000 0>;
> > max-brightness = <255>;
> > active-low;
> > };
> >
> > - led-blue {
> > + led-4 {
> > label = "mc1:blue:rgb";
> > pwms = <&leds_pwm 3 1000000 0>;
> > max-brightness = <255>;
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
/"\ ASCII RIBBON | »With the first link, the chain is forged. The first
\ / CAMPAIGN | speech censured, the first thought forbidden, the
X AGAINST | first freedom denied, chains us all irrevocably.«
/ \ HTML MAIL | (Jean-Luc Picard, quoting Judge Aaron Satie)
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists