| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201028202914.43662-3-cristian.marussi@arm.com>
Date: Wed, 28 Oct 2020 20:29:08 +0000
From: Cristian Marussi <cristian.marussi@....com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: sudeep.holla@....com, lukasz.luba@....com,
james.quinlan@...adcom.com, Jonathan.Cameron@...wei.com,
f.fainelli@...il.com, etienne.carriere@...aro.org,
thara.gopinath@...aro.org, vincent.guittot@...aro.org,
souvik.chakravarty@....com, cristian.marussi@....com
Subject: [PATCH v2 2/8] firmware: arm_scmi: introduce protocol handles
Add basic protocol handles definitions and helpers support.
All protocols initialization code and SCMI drivers probing is still
performed using the handle based interface.
Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
drivers/firmware/arm_scmi/common.h | 61 ++++++++++++++++++++++++++++
drivers/firmware/arm_scmi/driver.c | 64 ++++++++++++++++++++++++++++++
2 files changed, 125 insertions(+)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index b08a8ddbc22a..f0678be02a09 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -151,6 +151,67 @@ int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id,
size_t tx_size, size_t rx_size, struct scmi_xfer **p);
void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle,
struct scmi_xfer *xfer);
+
+struct scmi_xfer_ops;
+
+/**
+ * struct scmi_protocol_handle - Reference to an initialized protocol instance
+ *
+ * @dev: A reference to the associated SCMI instance device (handle->dev).
+ * @xops: A reference to a struct holding refs to the core xfer operations that
+ * can be used by the protocol implementation to generate SCMI messages.
+ * @set_priv: A method to set protocol private data for this instance.
+ * @get_priv: A method to get protocol private data previously set.
+ *
+ * This structure represents a protocol initialized against specific SCMI
+ * instance and it will be used as follows:
+ * - as a parameter fed from the core to the protocol initialization code so
+ * that it can access the core xfer operations to build and generate SCMI
+ * messages exclusively for the specific underlying protocol instance.
+ * - as an opaque handle fed by an SCMI driver user when it tries to access
+ * this protocol through its own protocol operations.
+ * In this case this handle will be returned as an opaque object together
+ * with the related protocol operations when the SCMI driver tries to access
+ * the protocol.
+ */
+struct scmi_protocol_handle {
+ struct device *dev;
+ const struct scmi_xfer_ops *xops;
+ int (*set_priv)(const struct scmi_protocol_handle *ph, void *priv);
+ void *(*get_priv)(const struct scmi_protocol_handle *ph);
+};
+
+/**
+ * struct scmi_xfer_ops - References to the core SCMI xfer operations.
+ * @version_get: Get this version protocol.
+ * @xfer_get_init: Initialize one struct xfer if any xfer slot is free.
+ * @reset_rx_to_maxsz: Reset rx size to max transport size.
+ * @do_xfer: Do the SCMI transfer.
+ * @do_xfer_with_response: Do the SCMI transfer waiting for a response.
+ * @xfer_put: Free the xfer slot.
+ *
+ * Note that all this operations expect a protocol handle as first parameter;
+ * they then internally use it to infer the underlying protocol number: this
+ * way is not possible for a protocol implementation to forge messages for
+ * another protocol.
+ */
+struct scmi_xfer_ops {
+ int (*version_get)(const struct scmi_protocol_handle *ph, u32 *version);
+ int (*xfer_get_init)(const struct scmi_protocol_handle *ph, u8 msg_id,
+ size_t tx_size, size_t rx_size,
+ struct scmi_xfer **p);
+ void (*reset_rx_to_maxsz)(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer);
+ int (*do_xfer)(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer);
+ int (*do_xfer_with_response)(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer);
+ void (*xfer_put)(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer);
+};
+
+struct scmi_revision_info *
+scmi_get_revision_area(const struct scmi_protocol_handle *ph);
int scmi_handle_put(const struct scmi_handle *handle);
struct scmi_handle *scmi_handle_get(struct device *dev);
void scmi_set_handle(struct scmi_device *scmi_dev);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index beae8991422d..8ca04acb6abb 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -72,19 +72,28 @@ struct scmi_xfers_info {
/**
* struct scmi_protocol_instance - Describe an initialized protocol instance.
+ * @handle: Reference to the SCMI handle associated to this protocol instance.
* @proto: A reference to the protocol descriptor.
* @gid: A reference for per-protocol devres management.
* @users: A refcount to track effective users of this protocol.
+ * @priv: Reference for optional protocol private data.
+ * @ph: An embedded protocol handle that will be passed down to protocol
+ * initialization code to identify this instance.
*
* Each protocol is initialized independently once for each SCMI platform in
* which is defined by DT and implemented by the SCMI server fw.
*/
struct scmi_protocol_instance {
+ const struct scmi_handle *handle;
const struct scmi_protocol *proto;
void *gid;
refcount_t users;
+ void *priv;
+ struct scmi_protocol_handle ph;
};
+#define ph_to_pi(h) container_of(h, struct scmi_protocol_instance, ph)
+
/**
* struct scmi_info - Structure representing a SCMI instance
*
@@ -543,6 +552,57 @@ int scmi_version_get(const struct scmi_handle *handle, u8 protocol,
return ret;
}
+/**
+ * scmi_set_protocol_priv - Set protocol specific data at init time
+ *
+ * @ph: A reference to the protocol handle.
+ * @priv: The private data to set.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_set_protocol_priv(const struct scmi_protocol_handle *ph,
+ void *priv)
+{
+ struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ pi->priv = priv;
+
+ return 0;
+}
+
+/**
+ * scmi_get_protocol_priv - Set protocol specific data at init time
+ *
+ * @ph: A reference to the protocol handle.
+ *
+ * Return: Protocol private data if any was set.
+ */
+static void *scmi_get_protocol_priv(const struct scmi_protocol_handle *ph)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ return pi->priv;
+}
+
+/**
+ * scmi_get_revision_area - Retrieve version memory area.
+ *
+ * @ph: A reference to the protocol handle.
+ *
+ * A helper to grab the version memory area reference during SCMI Base protocol
+ * initialization.
+ *
+ * Return: A reference to the version memory area associated to the SCMI
+ * instance underlying this protocol handle.
+ */
+struct scmi_revision_info *
+scmi_get_revision_area(const struct scmi_protocol_handle *ph)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ return pi->handle->version;
+}
+
/**
* scmi_get_protocol_instance - Protocol initialization helper.
* @handle: A reference to the SCMI platform instance.
@@ -588,6 +648,10 @@ scmi_get_protocol_instance(struct scmi_handle *handle, u8 protocol_id)
pi->gid = gid;
pi->proto = proto;
+ pi->handle = handle;
+ pi->ph.dev = handle->dev;
+ pi->ph.set_priv = scmi_set_protocol_priv;
+ pi->ph.get_priv = scmi_get_protocol_priv;
refcount_set(&pi->users, 1);
/* proto->init is assured NON NULL by scmi_protocol_register */
ret = pi->proto->init(handle);
--
2.17.1
Powered by blists - more mailing lists