[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201028234311.6464-2-wcheng@codeaurora.org>
Date: Wed, 28 Oct 2020 16:43:10 -0700
From: Wesley Cheng <wcheng@...eaurora.org>
To: balbi@...nel.org, gregkh@...uxfoundation.org,
Thinh.Nguyen@...opsys.com
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
jackp@...eaurora.org, Wesley Cheng <wcheng@...eaurora.org>
Subject: [PATCH 1/2] usb: dwc3: gadget: Allow runtime suspend if UDC unbinded
The DWC3 runtime suspend routine checks for the USB connected parameter to
determine if the controller can enter into a low power state. The
connected state is only set to false after receiving a disconnect event.
However, in the case of a device initiated disconnect (i.e. UDC unbind),
the controller is halted and a disconnect event is never generated. Set
the connected flag to false if issuing a device initiated disconnect to
allow the controller to be suspended.
Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
---
drivers/usb/dwc3/gadget.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5d879b7606d5..6364429b2122 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1995,6 +1995,11 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
unsigned long flags;
int ret;
+ if (pm_runtime_suspended(dwc->dev)) {
+ pm_request_resume(dwc->dev);
+ return 0;
+ }
+
is_on = !!is_on;
/*
@@ -2050,6 +2055,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
dwc->ev_buf->length;
}
+ dwc->connected = false;
}
ret = dwc3_gadget_run_stop(dwc, is_on, false);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists