Message-ID: <20201029142254.GM28755@dragon>
Date:   Thu, 29 Oct 2020 22:22:55 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Oleksij Rempel <o.rempel@...gutronix.de>
Cc:     Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        devicetree@...r.kernel.org, Fabio Estevam <festevam@...il.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        David Jander <david@...tonic.nl>
Subject: Re: [PATCH v2 2/2] ARM: dts: add Protonic WD3 board

On Thu, Sep 24, 2020 at 06:57:06AM +0200, Oleksij Rempel wrote:
> Protonic WD3 is a proof of concept platform for tractor e-cockpit applications
> 
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/imx6qp-prtwd3.dts | 553 ++++++++++++++++++++++++++++
>  2 files changed, 554 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6qp-prtwd3.dts

checkpatch warnings:

WARNING: DT compatible string vendor "virtual" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
#85: FILE: arch/arm/boot/dts/imx6qp-prtwd3.dts:53:
+		compatible = "virtual,mdio-gpio";

WARNING: DT compatible string "ethernet-phy-id0180.dc80" appears un-documented -- check ./Documentation/devicetree/bindings/
#108: FILE: arch/arm/boot/dts/imx6qp-prtwd3.dts:76:
+			compatible = "ethernet-phy-id0180.dc80";

WARNING: DT compatible string "microchip,mcp25xxfd" appears un-documented -- check ./Documentation/devicetree/bindings/
#230: FILE: arch/arm/boot/dts/imx6qp-prtwd3.dts:198:
+		compatible = "microchip,mcp25xxfd";

> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0730cbfe13db..2355b43a0f4b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -578,6 +578,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6qp-nitrogen6_max.dtb \
>  	imx6qp-nitrogen6_som2.dtb \
>  	imx6qp-phytec-mira-rdk-nand.dtb \
> +	imx6qp-prtwd3.dtb \
>  	imx6qp-sabreauto.dtb \
>  	imx6qp-sabresd.dtb \
>  	imx6qp-tx6qp-8037.dtb \
> diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
> new file mode 100644
> index 000000000000..1957d5686dee
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
> @@ -0,0 +1,553 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2018 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx6qp.dtsi"
> +
> +/ {
> +	model = "Protonic WD3 board";
> +	compatible = "prt,prtwd3", "fsl,imx6qp";
> +
> +	chosen {
> +		stdout-path = &uart4;
> +	};
> +
> +	memory@...00000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x20000000>;
> +	};
> +
> +	memory@...00000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	clock_ksz8081: clock-ksz8081 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	clock_ksz9031: clock-ksz9031 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	clock_mcp25xx: clock-mcp25xx {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <20000000>;
> +	};
> +
> +	clock_sja1105: clock-sja1105 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	mdio {
> +		compatible = "virtual,mdio-gpio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_mdio>;
> +

We generally do not have newlines in middle of property list.  Please
clean them up unless you really have a good reason to do so.

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
> +			 &gpio5 7 GPIO_ACTIVE_HIGH>;
> +
> +		/* Microchip KSZ8081 */
> +		usbeth_phy: ethernet-phy@3 {
> +			reg = <0x3>;
> +
> +			interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
> +			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
> +			reset-assert-us = <500>;
> +			reset-deassert-us = <1000>;
> +			clocks = <&clock_ksz8081>;
> +			clock-names = "rmii-ref";
> +			micrel,led-mode = <0>;
> +		};
> +
> +		tja1102_phy0: ethernet-phy@4 {
> +			compatible = "ethernet-phy-id0180.dc80";
> +			reg = <0x4>;
> +
> +			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> +			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> +			reset-assert-us = <20>;
> +			reset-deassert-us = <2000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			tja1102_phy1: ethernet-phy@5 {
> +				reg = <0x5>;
> +
> +				interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> +			};
> +		};
> +	};
> +
> +	reg_5v0: regulator-5v0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "5v0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	reg_otg_vbus: regulator-otg-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "otg-vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wifi_npd>;
> +		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can1>;
> +	xceiver-supply = <&reg_5v0>;
> +	status = "okay";
> +};
> +
> +&ecspi2 {
> +	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>;
> +	status = "okay";
> +
> +	switch@0 {
> +		compatible = "nxp,sja1105q";
> +		reg = <0>;
> +		spi-max-frequency = <4000000>;
> +		spi-rx-delay-us = <1>;
> +		spi-tx-delay-us = <1>;
> +		spi-cpha;
> +
> +		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
> +
> +		clocks = <&clock_sja1105>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				label = "usb";
> +				phy-handle = <&usbeth_phy>;
> +				phy-mode = "rmii";
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				label = "t1slave";
> +				phy-handle = <&tja1102_phy1>;
> +				phy-mode = "rmii";
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +				label = "t1master";
> +				phy-handle = <&tja1102_phy0>;
> +				phy-mode = "rmii";
> +

Meaningless newline.

> +			};
> +
> +			port@3 {
> +				reg = <3>;
> +				label = "rj45";
> +				phy-handle = <&rgmii_phy>;
> +				phy-mode = "rgmii-id";
> +			};
> +
> +			port@4 {
> +				reg = <4>;
> +				label = "cpu";
> +				ethernet = <&fec>;
> +				phy-mode = "rgmii-id";
> +
> +				fixed-link {
> +					speed = <100>;
> +					full-duplex;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&ecspi3 {
> +	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3>;
> +	status = "okay";
> +
> +	can@0 {
> +		compatible = "microchip,mcp25xxfd";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_can2>;
> +		reg = <0>;
> +		clocks = <&clock_mcp25xx>;
> +		spi-max-frequency = <5000000>;
> +		interrupts-extended = <&gpio4 25 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	status = "okay";
> +
> +	phy-mode = "rgmii";

We generally end property list with 'status'.

Shawn

> +
> +	fixed-link {
> +		speed = <100>;
> +		full-duplex;
> +	};
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* Microchip KSZ9031 */
> +		rgmii_phy: ethernet-phy@2 {
> +			reg = <2>;
> +
> +			interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
> +			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> +			reset-assert-us = <10000>;
> +			reset-deassert-us = <1000>;
> +
> +			clocks = <&clock_ksz9031>;
> +		};
> +	};
> +};
> +
> +&gpio1 {
> +	gpio-line-names =
> +		"", "SD1_CD", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "PHY3_RESET", "", "", "PHY3_INT", "", "", "";
> +};
> +
> +&gpio2 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3",
> +			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "ECSPI2_SS0", "", "", "", "", "";
> +};
> +
> +&gpio3 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "",
> +		"", "", "", "", "", "", "", "";
> +};
> +
> +&gpio4 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", "";
> +};
> +
> +&gpio5 {
> +	gpio-line-names =
> +		"", "", "", "", "", "SW_RESET", "", "",
> +		"PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET",
> +			"PHY0_INT", "", "", "",
> +		"", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD",
> +			"", "",
> +		"", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ",
> +			"DISP0_EN", "CAM_GPIO0";
> +};
> +
> +&gpio6 {
> +	gpio-line-names =
> +		"LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD",
> +			"CAM_LOCK", "", "POWER_TG",
> +		"POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "",
> +			"USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1",
> +		"USB_ETH_CHG_ID2", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "";
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	/* additional i2c devices are added automatically by the boot loader */
> +};
> +
> +&i2c3 {
> +	adc@49 {
> +		compatible = "ti,ads1015";
> +		reg = <0x49>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* VIN */
> +		channel@4 {
> +			reg = <4>;
> +			ti,gain = <1>;
> +			ti,datarate = <3>;
> +		};
> +
> +		/* VBUS */
> +		channel@5 {
> +			reg = <5>;
> +			ti,gain = <1>;
> +			ti,datarate = <3>;
> +		};
> +
> +		/* ICHG */
> +		channel@6 {
> +			reg = <6>;
> +			ti,gain = <1>;
> +			ti,datarate = <3>;
> +		};
> +
> +		channel@7 {
> +			reg = <7>;
> +			ti,gain = <1>;
> +			ti,datarate = <3>;
> +		};
> +	};
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	phy_type = "utmi";
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbphynop1 {
> +	status = "disabled";
> +};
> +
> +&usbphynop2 {
> +	status = "disabled";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> +	no-1-8-v;
> +	disable-wp;
> +	cap-sd-highspeed;
> +	no-mmc;
> +	no-sdio;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	no-1-8-v;
> +	non-removable;
> +	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
> +	status = "okay";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	brcmf: bcrmf@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	no-sd;
> +	no-sdio;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_can1: can1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
> +			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
> +			/* CAN1_SR */
> +			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
> +		>;
> +	};
> +
> +	pinctrl_can2: can2grp {
> +		fsl,pins = <
> +			/* CAN2_nINT */
> +			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x1b0b1
> +			/* CAN2_SR */
> +			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13070
> +		>;
> +	};
> +
> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
> +			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
> +			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
> +			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x000b1
> +		>;
> +	};
> +
> +	pinctrl_ecspi3: ecspi3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK		0x100b1
> +			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI		0x100b1
> +			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO		0x100b1
> +			/* CS */
> +			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x000b1
> +		>;
> +	};
> +
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
> +			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
> +			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
> +			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
> +			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
> +			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
> +			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
> +			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
> +			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
> +			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
> +			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
> +			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
> +
> +			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
> +			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
> +
> +			/* Configure clock provider for RGMII ref clock */
> +			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x4001b0b0
> +			/* Configure clock consumer for RGMII ref clock */
> +			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
> +
> +			/* SJA1105Q switch reset */
> +			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05		0x10030
> +
> +			/* phy3/rgmii_phy reset */
> +			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x10030
> +			/* phy3/rgmii_phy int */
> +			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x40010000
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
> +			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
> +		>;
> +	};
> +
> +	pinctrl_mdio: mdiogrp {
> +		fsl,pins = <
> +			/* phy0/usbeth_phy reset */
> +			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x10030
> +			/* phy0/usbeth_phy int */
> +			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
> +
> +			/* phy12/tja1102_phy0 reset */
> +			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x10030
> +			/* phy12/tja1102_phy0 int */
> +			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x100b1
> +			/* phy12/tja1102_phy0 enable. Set 100K pull-up */
> +			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1f030
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
> +			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
> +			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
> +			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
> +			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
> +			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
> +			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
> +			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
> +			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
> +			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
> +			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
> +			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
> +			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
> +			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
> +			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
> +			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
> +			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
> +			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
> +			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
> +			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
> +			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
> +			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
> +			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
> +			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_wifi_npd: wifinpd {
> +		fsl,pins = <
> +			/* WL_REG_ON */
> +			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
> +		>;
> +	};
> +};
> -- 
> 2.28.0
> 

Powered by blists - more mailing lists