| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201029164239.84240-24-krzk@kernel.org>
Date: Thu, 29 Oct 2020 17:42:38 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Pavel Machek <pavel@....cz>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Tianshu Qiu <tian.shu.qiu@...el.com>,
Dongchun Zhu <dongchun.zhu@...iatek.com>,
Shawn Tu <shawnx.tu@...el.com>,
Ricardo Ribalda <ribalda@...nel.org>,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bingbu Cao <bingbu.cao@...el.com>,
Rui Miguel Silva <rmfrfs@...il.com>,
Shunqian Zheng <zhengsq@...k-chips.com>,
Chiranjeevi Rapolu <chiranjeevi.rapolu@...el.com>,
Hyungwoo Yang <hyungwoo.yang@...el.com>,
Wenyou Yang <wenyou.yang@...rochip.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [RESEND PATCH 24/25] media: i2c: smiapp: simplify getting state container
The pointer to 'struct v4l2_subdev' is stored in drvdata via
v4l2_i2c_subdev_init() so there is no point of a dance like:
struct i2c_client *client = to_i2c_client(struct device *dev)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
This allows to remove local variable 'client' and few pointer
dereferences.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/media/i2c/smiapp/smiapp-core.c | 28 ++++++++++++--------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index 6fc0680a93d0..105ef29152e8 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -1185,8 +1185,7 @@ static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
static int smiapp_power_on(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct v4l2_subdev *subdev = dev_get_drvdata(dev);
struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
/*
* The sub-device related to the I2C device is always the
@@ -1199,14 +1198,14 @@ static int smiapp_power_on(struct device *dev)
rval = regulator_enable(sensor->vana);
if (rval) {
- dev_err(&client->dev, "failed to enable vana regulator\n");
+ dev_err(dev, "failed to enable vana regulator\n");
return rval;
}
usleep_range(1000, 1000);
rval = clk_prepare_enable(sensor->ext_clk);
if (rval < 0) {
- dev_dbg(&client->dev, "failed to enable xclk\n");
+ dev_dbg(dev, "failed to enable xclk\n");
goto out_xclk_fail;
}
usleep_range(1000, 1000);
@@ -1230,7 +1229,7 @@ static int smiapp_power_on(struct device *dev)
if (sensor->hwcfg->i2c_addr_alt) {
rval = smiapp_change_cci_addr(sensor);
if (rval) {
- dev_err(&client->dev, "cci address change error\n");
+ dev_err(dev, "cci address change error\n");
goto out_cci_addr_fail;
}
}
@@ -1238,14 +1237,14 @@ static int smiapp_power_on(struct device *dev)
rval = smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET,
SMIAPP_SOFTWARE_RESET);
if (rval < 0) {
- dev_err(&client->dev, "software reset failed\n");
+ dev_err(dev, "software reset failed\n");
goto out_cci_addr_fail;
}
if (sensor->hwcfg->i2c_addr_alt) {
rval = smiapp_change_cci_addr(sensor);
if (rval) {
- dev_err(&client->dev, "cci address change error\n");
+ dev_err(dev, "cci address change error\n");
goto out_cci_addr_fail;
}
}
@@ -1253,7 +1252,7 @@ static int smiapp_power_on(struct device *dev)
rval = smiapp_write(sensor, SMIAPP_REG_U16_COMPRESSION_MODE,
SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
if (rval) {
- dev_err(&client->dev, "compression mode set failed\n");
+ dev_err(dev, "compression mode set failed\n");
goto out_cci_addr_fail;
}
@@ -1261,28 +1260,28 @@ static int smiapp_power_on(struct device *dev)
sensor, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
sensor->hwcfg->ext_clk / (1000000 / (1 << 8)));
if (rval) {
- dev_err(&client->dev, "extclk frequency set failed\n");
+ dev_err(dev, "extclk frequency set failed\n");
goto out_cci_addr_fail;
}
rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_LANE_MODE,
sensor->hwcfg->lanes - 1);
if (rval) {
- dev_err(&client->dev, "csi lane mode set failed\n");
+ dev_err(dev, "csi lane mode set failed\n");
goto out_cci_addr_fail;
}
rval = smiapp_write(sensor, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
if (rval) {
- dev_err(&client->dev, "fast standby set failed\n");
+ dev_err(dev, "fast standby set failed\n");
goto out_cci_addr_fail;
}
rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
sensor->hwcfg->csi_signalling_mode);
if (rval) {
- dev_err(&client->dev, "csi signalling mode set failed\n");
+ dev_err(dev, "csi signalling mode set failed\n");
goto out_cci_addr_fail;
}
@@ -1294,7 +1293,7 @@ static int smiapp_power_on(struct device *dev)
rval = smiapp_call_quirk(sensor, post_poweron);
if (rval) {
- dev_err(&client->dev, "post_poweron quirks failed\n");
+ dev_err(dev, "post_poweron quirks failed\n");
goto out_cci_addr_fail;
}
@@ -1312,8 +1311,7 @@ static int smiapp_power_on(struct device *dev)
static int smiapp_power_off(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct v4l2_subdev *subdev = dev_get_drvdata(dev);
struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
struct smiapp_sensor *sensor =
container_of(ssd, struct smiapp_sensor, ssds[0]);
--
2.25.1
Powered by blists - more mailing lists