linux-kernel - Re: [PATCH 02/13] ARM: dts: imx7-tqma7: add SPI-NOR flash

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201028073813.GN9880@dragon>
Date:   Wed, 28 Oct 2020 15:38:13 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Matthias Schiffer <matthias.schiffer@...tq-group.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 02/13] ARM: dts: imx7-tqma7: add SPI-NOR flash

On Fri, Sep 18, 2020 at 01:29:31PM +0200, Matthias Schiffer wrote:
> The SPI-NOR flash on the SoM was missing from the device tree.
> 
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
> ---
>  arch/arm/boot/dts/imx7-tqma7.dtsi | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
> index 8773344b54aa..fd23f764399a 100644
> --- a/arch/arm/boot/dts/imx7-tqma7.dtsi
> +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
> @@ -160,6 +160,20 @@
>  		>;
>  	};
>  
> +	pinctrl_qspi: qspigrp {
> +		fsl,pins = <
> +			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
> +			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
> +			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
> +			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
> +			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
> +			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
> +			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
> +			/* #QSPI_RESET */
> +			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x40000052
> +		>;
> +	};
> +
>  	pinctrl_usdhc3: usdhc3grp {
>  		fsl,pins = <
>  			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
> @@ -217,6 +231,22 @@
>  	};
>  };
>  
> +&qspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_qspi>;
> +	status = "okay";
> +
> +	flash0: spinor@0 {

The node name should be as generic as possible.  So suggest something
like 'flash@0'.

Shawn

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <29000000>;
> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <4>;
> +		reg = <0>;
> +	};
> +};
> +
>  &sdma {
>  	status = "okay";
>  };
> -- 
> 2.17.1
>