| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <HK2PR06MB35078506D624FD03D699457E86140@HK2PR06MB3507.apcprd06.prod.outlook.com>
Date: Thu, 29 Oct 2020 09:26:40 +0000
From: Carl Yin(殷张成) <carl.yin@...ctel.com>
To: Hemant Kumar <hemantk@...eaurora.org>,
Jeffrey Hugo <jhugo@...eaurora.org>,
"manivannan.sadhasivam@...aro.org" <manivannan.sadhasivam@...aro.org>,
"sfr@...b.auug.org.au" <sfr@...b.auug.org.au>
CC: "linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Naveen Kumar" <naveen.kumar@...ctel.com>
Subject: RE: [PATCH] bus: mhi: core: Add support MHI EE FP for download
firmware
On October 28, 2020 7:02 AM, hemantk wrote:
> Hi Jeff,
>
> On 10/27/20 8:11 AM, Jeffrey Hugo wrote:
> > On 10/27/2020 3:43 AM, carl.yin@...ctel.com wrote:
> >> From: "carl.yin" <carl.yin@...ctel.com>
> >>
> >> MHI wwan modems support download firmware to nand or emmc by firehose
> >> protocol, process as next:
> >> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan
> >> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3.
> >> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface
> >> 4. modem enter EE FP, and create mhi EDL chan device 5. user space
> >> tool download FW to modem via EDL chan by firehose protocol
> >>
> >> Signed-off-by: carl.yin <carl.yin@...ctel.com>
> >> ---
> >> drivers/bus/mhi/core/boot.c | 4 +++-
> >> drivers/bus/mhi/core/init.c | 2 ++
> >> drivers/bus/mhi/core/internal.h | 1 +
> >> drivers/bus/mhi/core/main.c | 3 +++
> >> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++-
> >> include/linux/mhi.h | 4 +++-
> >> 6 files changed, 27 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/bus/mhi/core/boot.c
> >> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644
> >> --- a/drivers/bus/mhi/core/boot.c
> >> +++ b/drivers/bus/mhi/core/boot.c
> >> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller
> >> *mhi_cntrl)
> >> return;
> >> }
> >> - if (mhi_cntrl->ee == MHI_EE_EDL)
> >> + if (mhi_cntrl->ee == MHI_EE_EDL) {
> >> + mhi_ready_state_transition(mhi_cntrl);
> >> return;
> >> + }
> >> write_lock_irq(&mhi_cntrl->pm_lock);
> >> mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git
> >> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index
> >> ac4aa5c..9c2c2f3 100644
> >> --- a/drivers/bus/mhi/core/init.c
> >> +++ b/drivers/bus/mhi/core/init.c
> >> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = {
> >> [MHI_EE_WFW] = "WFW",
> >> [MHI_EE_PTHRU] = "PASS THRU",
> >> [MHI_EE_EDL] = "EDL",
> >> + [MHI_EE_FP] = "FP",
> >> [MHI_EE_DISABLE_TRANSITION] = "DISABLE",
> >> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED",
> >> };
> >> @@ -35,6 +36,7 @@ const char * const
> >> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
> >> [DEV_ST_TRANSITION_READY] = "READY",
> >> [DEV_ST_TRANSITION_SBL] = "SBL",
> >> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE",
> >> + [DEV_ST_TRANSITION_FP] = "FP",
> >> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR",
> >> [DEV_ST_TRANSITION_DISABLE] = "DISABLE",
> >> };
> >> diff --git a/drivers/bus/mhi/core/internal.h
> >> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644
> >> --- a/drivers/bus/mhi/core/internal.h
> >> +++ b/drivers/bus/mhi/core/internal.h
> >> @@ -386,6 +386,7 @@ enum dev_st_transition {
> >> DEV_ST_TRANSITION_READY,
> >> DEV_ST_TRANSITION_SBL,
> >> DEV_ST_TRANSITION_MISSION_MODE,
> >> + DEV_ST_TRANSITION_FP,
> >> DEV_ST_TRANSITION_SYS_ERR,
> >> DEV_ST_TRANSITION_DISABLE,
> >> DEV_ST_TRANSITION_MAX,
> >> diff --git a/drivers/bus/mhi/core/main.c
> >> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644
> >> --- a/drivers/bus/mhi/core/main.c
> >> +++ b/drivers/bus/mhi/core/main.c
> >> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct
> >> mhi_controller *mhi_cntrl,
> >> case MHI_EE_SBL:
> >> st = DEV_ST_TRANSITION_SBL;
> >> break;
> >> + case MHI_EE_FP:
> >> + st = DEV_ST_TRANSITION_FP;
> >> + break;
> >> case MHI_EE_WFW:
> >> case MHI_EE_AMSS:
> >> st = DEV_ST_TRANSITION_MISSION_MODE; diff
> --git
> >> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index
> >> 3de7b16..3c95a5d 100644
> >> --- a/drivers/bus/mhi/core/pm.c
> >> +++ b/drivers/bus/mhi/core/pm.c
> >> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct
> >> mhi_controller *mhi_cntrl,
> >> }
> >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) {
> >> - mhi_ready_state_transition(mhi_cntrl);
> >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL
> >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) {
> >> + write_lock_irq(&mhi_cntrl->pm_lock);
> >> + cur_state = mhi_tryset_pm_state(mhi_cntrl,
> MHI_PM_POR);
> >> + write_unlock_irq(&mhi_cntrl->pm_lock);
> >> + mhi_queue_state_transition(mhi_cntrl,
> >> DEV_ST_TRANSITION_PBL);
> >> + } else {
> >> + mhi_ready_state_transition(mhi_cntrl);
> >> + }
> >> } else {
> >> /* Move to disable state */
> >> write_lock_irq(&mhi_cntrl->pm_lock);
> >> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work)
> >> case DEV_ST_TRANSITION_MISSION_MODE:
> >> mhi_pm_mission_mode_transition(mhi_cntrl);
> >> break;
> >> + case DEV_ST_TRANSITION_FP:
> >> + write_lock_irq(&mhi_cntrl->pm_lock);
> >> + mhi_cntrl->ee = MHI_EE_FP;
> >> + write_unlock_irq(&mhi_cntrl->pm_lock);
> >> + mhi_create_devices(mhi_cntrl);
> >> + break;
> >> case DEV_ST_TRANSITION_READY:
> >> mhi_ready_state_transition(mhi_cntrl);
> >> break;
> >> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index
> >> 6e1122c..4620af8 100644
> >> --- a/include/linux/mhi.h
> >> +++ b/include/linux/mhi.h
> >> @@ -120,6 +120,7 @@ struct mhi_link_info {
> >> * @MHI_EE_WFW: WLAN firmware mode
> >> * @MHI_EE_PTHRU: Passthrough
> >> * @MHI_EE_EDL: Embedded downloader
> >> + * @MHI_EE_FP, Flash Programmer Environment
> >> */
> >> enum mhi_ee_type {
> >> MHI_EE_PBL,
> >> @@ -129,7 +130,8 @@ enum mhi_ee_type {
> >> MHI_EE_WFW,
> >> MHI_EE_PTHRU,
> >> MHI_EE_EDL,
> >> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
> >> + MHI_EE_FP,
> >> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP,
> >> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec
> >> */
> >> MHI_EE_NOT_SUPPORTED,
> >> MHI_EE_MAX,
> >>
> >
> > This gets a NACK from me. I don't see the FP_EE that this patch
> > introduces defined in the spec. Where did it come from?
> >
> There is indeed a FP EE, BHI spec will be updated with this EE next month.
>
> Basically, once device goes to EDL, flash programmer image is downloaded using
> BHI protocol (same as we download SBL image using BHI from PBL in current use
> case). Once it is downloaded intvec sends EE change event for FP. Also event is
> generated for the same which is used to create EDL channels (34, 35) which is
> used by flash programmer to flash image for AMSS.
>
> >> 2. send EDL cmd via DIAG chan, then modem enter EE EDL
> #2 needs to be done in cleaner way. From AMSS when diag cmd is sent to switch
> to EDL, device would send SYS_ERR which we can use to do a call back to mhi
> controller to perform power down and power up. Instead of moving pm state to
> POR from disable transition :-
[carl.yin] why I need move pm_state to POR, it is because if pm_state is SYS_ERR,
mhi_fw_load_handler() will break, and will not download edl image to device.
We can change pm.c as next, and revert the change to boot.c
if (cur_state == MHI_PM_SYS_ERR_PROCESS) {
if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL
&& mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) {
write_lock_irq(&mhi_cntrl->pm_lock);
mhi_cntrl->ee = MHI_EE_EDL;
write_unlock_irq(&mhi_cntrl->pm_lock);
mhi_fw_load_handler(mhi_cntrl);
}
mhi_ready_state_transition(mhi_cntrl);
}
>
> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >>
> mhi_controller *mhi_cntrl,
> >> }
> >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) {
> >> - mhi_ready_state_transition(mhi_cntrl);
> >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL
> >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) {
> >> + write_lock_irq(&mhi_cntrl->pm_lock);
> >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR);
> >> + write_unlock_irq(&mhi_cntrl->pm_lock);
> >> + mhi_queue_state_transition(mhi_cntrl,
> >> DEV_ST_TRANSITION_PBL);
> >> + } else {
> >> + mhi_ready_state_transition(mhi_cntrl);
> >> + }
>
> Thanks,
> Hemant
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a
> Linux Foundation Collaborative Project
Powered by blists - more mailing lists