Message-Id: <20201030174429.29893-2-nramas@linux.microsoft.com>
Date:   Fri, 30 Oct 2020 10:44:26 -0700
From:   Lakshmi Ramasubramanian <nramas@...ux.microsoft.com>
To:     zohar@...ux.ibm.com, bauerman@...ux.ibm.com, robh@...nel.org,
        gregkh@...uxfoundation.org, james.morse@....com,
        catalin.marinas@....com, sashal@...nel.org, will@...nel.org,
        mpe@...erman.id.au, benh@...nel.crashing.org, paulus@...ba.org,
        robh+dt@...nel.org, frowand.list@...il.com,
        vincenzo.frascino@....com, mark.rutland@....com,
        dmitry.kasatkin@...il.com, jmorris@...ei.org, serge@...lyn.com,
        pasha.tatashin@...een.com, allison@...utok.net,
        kstewart@...uxfoundation.org, takahiro.akashi@...aro.org,
        tglx@...utronix.de, masahiroy@...nel.org, bhsharma@...hat.com,
        mbrugger@...e.com, hsinyi@...omium.org, tao.li@...o.com,
        christophe.leroy@....fr
Cc:     linux-integrity@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, prsriva@...ux.microsoft.com,
        balajib@...ux.microsoft.com
Subject: [PATCH v8 1/4] powerpc: Refactor kexec functions to move arch independent code to drivers/of

The functions remove_ima_buffer() and delete_fdt_mem_rsv() that handle
carrying forward the IMA measurement logs on kexec for powerpc do not
have architecture specific code, but they are currently defined for
powerpc only.

remove_ima_buffer() and delete_fdt_mem_rsv() are used to remove
the IMA log entry from the device tree and free the memory reserved
for the log. These functions need to be defined even if the current
kernel does not support carrying forward IMA log across kexec since
the previous kernel could have supported that and therefore the current
kernel needs to free the allocation.

Rename remove_ima_buffer() to remove_ima_kexec_buffer().
Define remove_ima_kexec_buffer() and delete_fdt_mem_rsv() in
drivers/of/fdt.c. A later patch in this series will use these functions
to free the allocation, if any, made by the previous kernel for ARM64.

Define FDT_PROP_IMA_KEXEC_BUFFER for the chosen node, namely
"linux,ima-kexec-buffer", that is added to the DTB to hold
the address and the size of the memory reserved to carry
the IMA measurement log.

Co-developed-by: Prakhar Srivastava <prsriva@...ux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@...ux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@...ux.microsoft.com>
Reported-by: kernel test robot <lkp@...el.com> error: kernel/kexec_file_fdt.c:30: undefined reference to `fdt_num_mem_rsv'
---
 arch/powerpc/include/asm/ima.h   |  10 +--
 arch/powerpc/include/asm/kexec.h |   1 -
 arch/powerpc/kexec/file_load.c   |  33 +---------
 arch/powerpc/kexec/ima.c         |  55 +++-------------
 drivers/of/fdt.c                 | 110 +++++++++++++++++++++++++++++++
 include/linux/kexec.h            |  24 +++++++
 include/linux/libfdt.h           |   3 +
 7 files changed, 149 insertions(+), 87 deletions(-)

diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
index ead488cf3981..6355a85a3289 100644
--- a/arch/powerpc/include/asm/ima.h
+++ b/arch/powerpc/include/asm/ima.h
@@ -2,17 +2,13 @@
 #ifndef _ASM_POWERPC_IMA_H
 #define _ASM_POWERPC_IMA_H
 
+#include <linux/kexec.h>
+
 struct kimage;
 
 int ima_get_kexec_buffer(void **addr, size_t *size);
 int ima_free_kexec_buffer(void);
 
-#ifdef CONFIG_IMA
-void remove_ima_buffer(void *fdt, int chosen_node);
-#else
-static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
-#endif
-
 #ifdef CONFIG_IMA_KEXEC
 int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
 			      size_t size);
@@ -22,7 +18,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
 static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
 				   int chosen_node)
 {
-	remove_ima_buffer(fdt, chosen_node);
+	remove_ima_kexec_buffer(fdt, chosen_node);
 	return 0;
 }
 #endif /* CONFIG_IMA_KEXEC */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 55d6ede30c19..7c223031ecdd 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -126,7 +126,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code,
 int setup_new_fdt(const struct kimage *image, void *fdt,
 		  unsigned long initrd_load_addr, unsigned long initrd_len,
 		  const char *cmdline);
-int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size);
 
 #ifdef CONFIG_PPC64
 struct kexec_buf;
diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c
index 9a232bc36c8f..7a17655c530e 100644
--- a/arch/powerpc/kexec/file_load.c
+++ b/arch/powerpc/kexec/file_load.c
@@ -18,6 +18,7 @@
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
 #include <linux/libfdt.h>
+#include <linux/kexec.h>
 #include <asm/setup.h>
 #include <asm/ima.h>
 
@@ -109,38 +110,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code,
 	return 0;
 }
 
-/**
- * delete_fdt_mem_rsv - delete memory reservation with given address and size
- *
- * Return: 0 on success, or negative errno on error.
- */
-int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size)
-{
-	int i, ret, num_rsvs = fdt_num_mem_rsv(fdt);
-
-	for (i = 0; i < num_rsvs; i++) {
-		uint64_t rsv_start, rsv_size;
-
-		ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size);
-		if (ret) {
-			pr_err("Malformed device tree.\n");
-			return -EINVAL;
-		}
-
-		if (rsv_start == start && rsv_size == size) {
-			ret = fdt_del_mem_rsv(fdt, i);
-			if (ret) {
-				pr_err("Error deleting device tree reservation.\n");
-				return -EINVAL;
-			}
-
-			return 0;
-		}
-	}
-
-	return -ENOENT;
-}
-
 /*
  * setup_new_fdt - modify /chosen and memory reservation for the next kernel
  * @image:		kexec image being loaded.
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 720e50e490b6..2b790230ea15 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c
@@ -11,6 +11,8 @@
 #include <linux/of.h>
 #include <linux/memblock.h>
 #include <linux/libfdt.h>
+#include <linux/ima.h>
+#include <asm/ima.h>
 
 static int get_addr_size_cells(int *addr_cells, int *size_cells)
 {
@@ -28,24 +30,6 @@ static int get_addr_size_cells(int *addr_cells, int *size_cells)
 	return 0;
 }
 
-static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
-			       size_t *size)
-{
-	int ret, addr_cells, size_cells;
-
-	ret = get_addr_size_cells(&addr_cells, &size_cells);
-	if (ret)
-		return ret;
-
-	if (len < 4 * (addr_cells + size_cells))
-		return -ENOENT;
-
-	*addr = of_read_number(prop, addr_cells);
-	*size = of_read_number(prop + 4 * addr_cells, size_cells);
-
-	return 0;
-}
-
 /**
  * ima_get_kexec_buffer - get IMA buffer from the previous kernel
  * @addr:	On successful return, set to point to the buffer contents.
@@ -100,37 +84,14 @@ int ima_free_kexec_buffer(void)
 
 }
 
-/**
- * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
- *
- * The IMA measurement buffer is of no use to a subsequent kernel, so we always
- * remove it from the device tree.
- */
-void remove_ima_buffer(void *fdt, int chosen_node)
-{
-	int ret, len;
-	unsigned long addr;
-	size_t size;
-	const void *prop;
-
-	prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
-	if (!prop)
-		return;
-
-	ret = do_get_kexec_buffer(prop, len, &addr, &size);
-	fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
-	if (ret)
-		return;
-
-	ret = delete_fdt_mem_rsv(fdt, addr, size);
-	if (!ret)
-		pr_debug("Removed old IMA buffer reservation.\n");
-}
-
 #ifdef CONFIG_IMA_KEXEC
 /**
  * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
  *
+ * @image: kimage struct to set IMA buffer data
+ * @load_addr: Starting address where IMA buffer is loaded at
+ * @size: Number of bytes in the IMA buffer
+ *
  * Architectures should use this function to pass on the IMA buffer
  * information to the next kernel.
  *
@@ -179,7 +140,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	int ret, addr_cells, size_cells, entry_size;
 	u8 value[16];
 
-	remove_ima_buffer(fdt, chosen_node);
+	remove_ima_kexec_buffer(fdt, chosen_node);
 	if (!image->arch.ima_buffer_size)
 		return 0;
 
@@ -201,7 +162,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	if (ret)
 		return ret;
 
-	ret = fdt_setprop(fdt, chosen_node, "linux,ima-kexec-buffer", value,
+	ret = fdt_setprop(fdt, chosen_node, FDT_PROP_IMA_KEXEC_BUFFER, value,
 			  entry_size);
 	if (ret < 0)
 		return -EINVAL;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 4602e467ca8b..d2e6f8ce0e42 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -25,6 +25,7 @@
 #include <linux/serial_core.h>
 #include <linux/sysfs.h>
 #include <linux/random.h>
+#include <linux/kexec.h>
 
 #include <asm/setup.h>  /* for COMMAND_LINE_SIZE */
 #include <asm/page.h>
@@ -1289,4 +1290,113 @@ static int __init of_fdt_raw_init(void)
 late_initcall(of_fdt_raw_init);
 #endif
 
+#ifdef CONFIG_HAVE_IMA_KEXEC
+/**
+ * do_get_kexec_buffer - Get address and size of IMA kexec buffer
+ *
+ * @prop: IMA kexec buffer node in the device tree
+ * @len: Size of the given device tree node property
+ * @addr: Return address of the node
+ * @size: Return size of the node
+ */
+int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
+			size_t *size)
+{
+	int addr_cells, size_cells;
+	struct device_node *root;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return -EINVAL;
+
+	addr_cells = of_n_addr_cells(root);
+	size_cells = of_n_size_cells(root);
+
+	of_node_put(root);
+
+	if (len < 4 * (addr_cells + size_cells))
+		return -ENOENT;
+
+	*addr = of_read_number(prop, addr_cells);
+	*size = of_read_number(prop + 4 * addr_cells, size_cells);
+
+	return 0;
+}
+
+/**
+ * remove_ima_kexec_buffer - remove the IMA buffer property and
+ *			     reservation from @fdt
+ *
+ * @fdt: Flattened Device Tree to update
+ * @chosen_node: Offset to the chosen node in the device tree
+ *
+ * The IMA measurement buffer is of no use to a subsequent kernel,
+ * so we always remove it from the device tree.
+ */
+void remove_ima_kexec_buffer(void *fdt, int chosen_node)
+{
+	int ret, len;
+	unsigned long addr;
+	size_t size;
+	const void *prop;
+
+	prop = fdt_getprop(fdt, chosen_node, FDT_PROP_IMA_KEXEC_BUFFER, &len);
+	if (!prop) {
+		pr_debug("Unable to find the ima kexec buffer node\n");
+		return;
+	}
+
+	ret = do_get_kexec_buffer(prop, len, &addr, &size);
+	fdt_delprop(fdt, chosen_node, FDT_PROP_IMA_KEXEC_BUFFER);
+	if (ret) {
+		pr_err("Unable to delete the ima kexec buffer node\n");
+		return;
+	}
+
+	ret = delete_fdt_mem_rsv(fdt, addr, size);
+	if (!ret)
+		pr_debug("Removed old IMA buffer reservation.\n");
+}
+#endif /* CONFIG_HAVE_IMA_KEXEC */
+
+#ifdef CONFIG_KEXEC_FILE
+/**
+ * delete_fdt_mem_rsv - delete memory reservation with given address and size
+ *
+ * @fdt: Flattened Device Tree to update
+ * @start: Starting address of the reservation to delete
+ * @size: Size of the reservation to delete
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size)
+{
+	int i, ret, num_rsvs = fdt_num_mem_rsv(fdt);
+
+	for (i = 0; i < num_rsvs; i++) {
+		uint64_t rsv_start, rsv_size;
+
+		ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size);
+		if (ret) {
+			pr_err("Malformed device tree.\n");
+			return -EINVAL;
+		}
+
+		if (rsv_start == start && rsv_size == size) {
+			ret = fdt_del_mem_rsv(fdt, i);
+			if (ret) {
+				pr_err("Error deleting device tree reservation.\n");
+				return -EINVAL;
+			}
+
+			pr_debug("Freed reserved memory at %lu of size %lu\n",
+				 start, size);
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+#endif /* CONFIG_KEXEC_FILE */
+
 #endif /* CONFIG_OF_EARLY_FLATTREE */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 9e93bef52968..6c6c6791a7ba 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -407,6 +407,30 @@ static inline int kexec_crash_loaded(void) { return 0; }
 #define kexec_in_progress false
 #endif /* CONFIG_KEXEC_CORE */
 
+#if defined(CONFIG_OF_EARLY_FLATTREE) && defined(CONFIG_HAVE_IMA_KEXEC)
+extern void remove_ima_kexec_buffer(void *fdt, int chosen_node);
+extern int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
+			       size_t *size);
+#else
+static inline void remove_ima_kexec_buffer(void *fdt, int chosen_node) {}
+static inline int do_get_kexec_buffer(const void *prop, int len,
+				      unsigned long *addr, size_t *size)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_OF_EARLY_FLATTREE && CONFIG_HAVE_IMA_KEXEC */
+
+#if defined(CONFIG_OF_EARLY_FLATTREE) && defined(CONFIG_KEXEC_FILE)
+extern int delete_fdt_mem_rsv(void *fdt, unsigned long start,
+			      unsigned long size);
+#else
+static inline int delete_fdt_mem_rsv(void *fdt, unsigned long start,
+				     unsigned long size)
+{
+	return 0;
+}
+#endif /* CONFIG_OF_EARLY_FLATTREE && CONFIG_KEXEC_FILE */
+
 #endif /* !defined(__ASSEBMLY__) */
 
 #endif /* LINUX_KEXEC_H */
diff --git a/include/linux/libfdt.h b/include/linux/libfdt.h
index 90ed4ebfa692..75fb40aa013b 100644
--- a/include/linux/libfdt.h
+++ b/include/linux/libfdt.h
@@ -5,4 +5,7 @@
 #include <linux/libfdt_env.h>
 #include "../../scripts/dtc/libfdt/libfdt.h"
 
+/* Common device tree properties */
+#define FDT_PROP_IMA_KEXEC_BUFFER	"linux,ima-kexec-buffer"
+
 #endif /* _INCLUDE_LIBFDT_H_ */
-- 
2.29.0

Powered by blists - more mailing lists