Message-ID: <20201030091205.GP28755@dragon>
Date:   Fri, 30 Oct 2020 17:12:06 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Oleksij Rempel <o.rempel@...gutronix.de>
Cc:     Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        David Jander <david@...tonic.nl>, devicetree@...r.kernel.org,
        Fabio Estevam <festevam@...il.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: Re: [PATCH v1 3/3] ARM: dts: add Altesco I6P board

On Mon, Oct 12, 2020 at 09:24:52AM +0200, Oleksij Rempel wrote:
> Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
> for the vehicle inspection stations.
> 
> Co-Developed-by: David Jander <david@...tonic.nl>

checkpatch warning:

WARNING: 'Co-developed-by:' is the preferred signature form
#9: 
Co-Developed-by: David Jander <david@...tonic.nl>

> Signed-off-by: David Jander <david@...tonic.nl>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/imx6dl-alti6p.dts | 568 ++++++++++++++++++++++++++++
>  2 files changed, 569 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-alti6p.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 43cd1b4be2c7..2289a28c0ff6 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -410,6 +410,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
>  	imx53-usbarmory.dtb \
>  	imx53-voipac-bsb.dtb
>  dtb-$(CONFIG_SOC_IMX6Q) += \
> +	imx6dl-alti6p.dtb \
>  	imx6dl-apf6dev.dtb \
>  	imx6dl-aristainetos_4.dtb \
>  	imx6dl-aristainetos_7.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
> new file mode 100644
> index 000000000000..eab49b74850f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
> @@ -0,0 +1,568 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2016 Protonic Holland
> + * Copyright (c) 2020 Oleksij Rempel <kernel@...gutronix.de>, Pengutronix
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +#include "imx6dl.dtsi"
> +
> +/ {
> +	model = "Altesco I6P Board";
> +	compatible = "alt,alti6p", "fsl,imx6dl";
> +
> +	chosen {
> +		stdout-path = &uart4;
> +	};
> +
> +	clock_ksz8081: clock-ksz8081 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	i2c2-mux {
> +		compatible = "i2c-mux";
> +		i2c-parent = <&i2c2>;
> +

Can we drop these meaningless newlines in middle of property list
please?

Shawn

> +		mux-controls = <&i2c_mux>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c@1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		i2c@2 {
> +			reg = <2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +	};
> +
> +	i2c4-mux {
> +		compatible = "i2c-mux";
> +		i2c-parent = <&i2c4>;
> +
> +		mux-controls = <&i2c_mux>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c@1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		i2c@2 {
> +			reg = <2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_leds>;
> +
> +		led-debug0 {
> +			function = LED_FUNCTION_STATUS;
> +			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		led-debug1 {
> +			function = LED_FUNCTION_SD;
> +			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "disk-activity";
> +		};
> +	};
> +
> +	i2c_mux: mux-controller {
> +		compatible = "gpio-mux";
> +		#mux-control-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_i2cmux>;
> +
> +		mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 11 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	reg_1v8: regulator-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1v8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	reg_3v3: regulator-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_5v0: regulator-5v0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "5v0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	reg_h1_vbus: regulator-h1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "h1-vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_otg_vbus: regulator-otg-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "otg-vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "prti6q-sgtl5000";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,widgets =
> +			"Microphone", "Microphone Jack",
> +			"Line", "Line In Jack",
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "External Speaker";
> +		simple-audio-card,routing =
> +			"MIC_IN", "Microphone Jack",
> +			"LINE_IN", "Line In Jack",
> +			"Headphone Jack", "HP_OUT",
> +			"External Speaker", "LINE_OUT";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&ssi1>;
> +			system-clock-frequency = <0>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&sgtl5000>;
> +			bitclock-master;
> +			frame-master;
> +		};
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux>;
> +	status = "okay";
> +
> +	mux-ssi1 {
> +		fsl,audmux-port = <0>;
> +		fsl,port-config = <
> +			IMX_AUDMUX_V2_PTCR_SYN		0
> +			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
> +			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
> +			IMX_AUDMUX_V2_PTCR_TFSDIR	0
> +			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
> +		>;
> +	};
> +
> +	mux-pins3 {
> +		fsl,audmux-port = <2>;
> +		fsl,port-config = <
> +			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
> +			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
> +		>;
> +	};
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can1>;
> +	xceiver-supply = <&reg_5v0>;
> +	status = "okay";
> +};
> +
> +&ecspi1 {
> +	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1>;
> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <20000000>;
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-mode = "rmii";
> +	clocks = <&clks IMX6QDL_CLK_ENET>,
> +		 <&clks IMX6QDL_CLK_ENET>,
> +		 <&clock_ksz8081>;
> +	clock-names = "ipg", "ahb", "ptp";
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* Microchip KSZ8081RNA PHY */
> +		rgmii_phy: ethernet-phy@0 {
> +			reg = <0>;
> +			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
> +			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> +			reset-assert-us = <10000>;
> +			reset-deassert-us = <300>;
> +		};
> +	};
> +};
> +
> +&gpio1 {
> +	gpio-line-names =
> +		"", "SD1_CD", "", "USB_H1_OC", "", "", "", "",
> +		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "";
> +};
> +
> +&gpio3 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "",
> +		"", "", "", "", "", "", "", "";
> +};
> +
> +&gpio4 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "", "", "", "", "", "",
> +		"", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", "";
> +};
> +
> +&gpio5 {
> +	gpio-line-names =
> +		"", "", "", "", "", "", "", "",
> +		"", "", "I2C_EN13", "I2C_EN24", "", "", "", "",
> +		"", "", "", "", "", "AUDIO_RESET", "", "",
> +		"", "", "", "", "", "", "", "";
> +};
> +
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi>;
> +	ddc-i2c-bus = <&i2c1>;
> +	status = "okay";
> +};
> +
> +/* DDC */
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	sgtl5000: audio-codec@a {
> +		compatible = "fsl,sgtl5000";
> +		reg = <0xa>;
> +		#sound-dai-cells = <0>;
> +		clocks = <&clks 201>;
> +		VDDA-supply = <&reg_3v3>;
> +		VDDIO-supply = <&reg_3v3>;
> +		VDDD-supply = <&reg_1v8>;
> +	};
> +
> +	/* additional i2c devices are added automatically by the boot loader */
> +};
> +
> +&i2c2 {
> +	clock-frequency = <50000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	/* external interface, device are configured from user space */
> +};
> +
> +&i2c3 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +
> +	rtc@51 {
> +		compatible = "nxp,pcf8563";
> +		reg = <0x51>;
> +	};
> +
> +	temperature-sensor@70 {
> +		compatible = "ti,tmp103";
> +		reg = <0x70>;
> +	};
> +};
> +
> +&i2c4 {
> +	clock-frequency = <50000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +	status = "okay";
> +};
> +
> +&ssi1 {
> +	#sound-dai-cells = <0>;
> +	fsl,mode = "ac97-slave";
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	status = "okay";
> +};
> +
> +&uart5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart5>;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	vbus-supply = <&reg_h1_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbh1>;
> +	phy_type = "utmi";
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	phy_type = "utmi";
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> +	no-1-8-v;
> +	disable-wp;
> +	cap-sd-highspeed;
> +	no-mmc;
> +	no-sdio;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	no-sd;
> +	no-sdio;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_audmux: audmuxgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
> +			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
> +			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
> +			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
> +			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
> +		>;
> +	};
> +
> +	pinctrl_can1: can1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
> +			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
> +		>;
> +	};
> +
> +	pinctrl_ecspi1: ecspi1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
> +			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
> +			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
> +			/* CS */
> +			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
> +		>;
> +	};
> +
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			/* MX6QDL_ENET_PINGRP4 */
> +			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
> +			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
> +			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
> +			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
> +			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
> +			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
> +			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
> +			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
> +			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
> +
> +			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
> +			/* Phy reset */
> +			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
> +			/* nINTRP */
> +			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_hdmi: hdmigrp {
> +		fsl,pins = <
> +			/* NOTE: DDC is done via I2C2, so DON'T configure DDC
> +			 * pins for HDMI!
> +			 */
> +			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE		0x1f8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
> +			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_COL3__I2C2_SCL			0x4001b8b1
> +			MX6QDL_PAD_KEY_ROW3__I2C2_SDA			0x4001b8b1
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
> +			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_NANDF_CS3__I2C4_SDA			0x4001f8b1
> +			MX6QDL_PAD_NANDF_WP_B__I2C4_SCL			0x4001f8b1
> +		>;
> +	};
> +
> +	pinctrl_i2cmux: i2cmuxgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1b0b0
> +			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_leds: ledsgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
> +			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_pwm1: pwm1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x8
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
> +			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
> +			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart5: uart5grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
> +			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usbh1: usbh1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_3__USB_H1_OC			0x1B058
> +			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1B058
> +
> +		>;
> +	};
> +
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
> +			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
> +			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
> +			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
> +			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
> +			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
> +			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
> +			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
> +			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
> +			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
> +			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
> +			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
> +			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
> +			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
> +			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
> +			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
> +			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
> +			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
> +		>;
> +	};
> +};
> -- 
> 2.28.0
> 

Powered by blists - more mailing lists