| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201030113622.201188-9-enric.balletbo@collabora.com>
Date: Fri, 30 Oct 2020 12:36:14 +0100
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: linux-kernel@...r.kernel.org
Cc: matthias.bgg@...il.com, drinkcat@...omium.org, hsinyi@...omium.org,
Collabora Kernel ML <kernel@...labora.com>,
weiyi.lu@...iatek.com, fparent@...libre.com,
Matthias Brugger <mbrugger@...e.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v4 08/16] soc: mediatek: pm-domains: Add subsystem clocks
From: Matthias Brugger <mbrugger@...e.com>
For the bus protection operations, some subsystem clocks need to be enabled
before releasing the protection. This patch identifies the subsystem clocks
by it's name.
Suggested-by: Weiyi Lu <weiyi.lu@...iatek.com>
[Adapted the patch to the mtk-pm-domains driver]
Signed-off-by: Matthias Brugger <mbrugger@...e.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
---
Changes in v4: None
Changes in v3:
- Prepare the basic clocks before we prepare the subsystem clocks.
Changes in v2:
- Use dev_err_probe if getting clocks fails, so an error is not printed
if is deferred.
drivers/soc/mediatek/mtk-pm-domains.c | 81 +++++++++++++++++++++++----
drivers/soc/mediatek/mtk-pm-domains.h | 2 +
2 files changed, 72 insertions(+), 11 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index a6f25933dbf0..88dec58aedd9 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -3,6 +3,7 @@
* Copyright (c) 2020 Collabora Ltd.
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -33,6 +34,8 @@ struct scpsys_domain {
struct scpsys *scpsys;
int num_clks;
struct clk_bulk_data *clks;
+ int num_subsys_clks;
+ struct clk_bulk_data *subsys_clks;
struct regmap *infracfg;
struct regmap *smi;
};
@@ -204,9 +207,13 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
+ ret = clk_bulk_enable(pd->num_subsys_clks, pd->subsys_clks);
+ if (ret)
+ goto err_pwr_ack;
+
ret = scpsys_sram_enable(pd);
if (ret < 0)
- goto err_pwr_ack;
+ goto err_disable_subsys_clks;
ret = scpsys_bus_protect_disable(pd);
if (ret < 0)
@@ -216,6 +223,8 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
err_disable_sram:
scpsys_sram_disable(pd);
+err_disable_subsys_clks:
+ clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
err_pwr_ack:
clk_bulk_disable(pd->num_clks, pd->clks);
return ret;
@@ -236,6 +245,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
if (ret < 0)
return ret;
+ clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
+
/* subsys power off */
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
@@ -259,7 +270,11 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
{
const struct scpsys_domain_data *domain_data;
struct scpsys_domain *pd;
- int i, ret;
+ struct property *prop;
+ const char *clk_name;
+ int i, ret, num_clks;
+ struct clk *clk;
+ int clk_ind = 0;
u32 id;
ret = of_property_read_u32(node, "reg", &id);
@@ -295,25 +310,62 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
if (IS_ERR(pd->smi))
return ERR_CAST(pd->smi);
- pd->num_clks = of_clk_get_parent_count(node);
- if (pd->num_clks > 0) {
+ num_clks = of_clk_get_parent_count(node);
+ if (num_clks > 0) {
+ /* Calculate number of subsys_clks */
+ of_property_for_each_string(node, "clock-names", prop, clk_name) {
+ char *subsys;
+
+ subsys = strchr(clk_name, '-');
+ if (subsys)
+ pd->num_subsys_clks++;
+ else
+ pd->num_clks++;
+ }
+
pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
if (!pd->clks)
return ERR_PTR(-ENOMEM);
+
+ pd->subsys_clks = devm_kcalloc(scpsys->dev, pd->num_subsys_clks,
+ sizeof(*pd->subsys_clks), GFP_KERNEL);
+ if (!pd->subsys_clks)
+ return ERR_PTR(-ENOMEM);
+
}
for (i = 0; i < pd->num_clks; i++) {
- pd->clks[i].clk = of_clk_get(node, i);
- if (IS_ERR(pd->clks[i].clk)) {
- dev_err(scpsys->dev, "%pOF: failed to get clk at index %d\n",
- node, i);
- return ERR_PTR(-EINVAL);
+ clk = of_clk_get(node, i);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err_probe(scpsys->dev, ret,
+ "%pOF: failed to get clk at index %d: %d\n", node, i, ret);
+ goto err_put_clocks;
}
+
+ pd->clks[clk_ind++].clk = clk;
+ }
+
+ for (i = 0; i < pd->num_subsys_clks; i++) {
+ clk = of_clk_get(node, i + clk_ind);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err_probe(scpsys->dev, ret,
+ "%pOF: failed to get clk at index %d: %d\n", node,
+ i + clk_ind, ret);
+ goto err_put_subsys_clocks;
+ }
+
+ pd->subsys_clks[i].clk = clk;
}
ret = clk_bulk_prepare(pd->num_clks, pd->clks);
if (ret)
- goto err_put_clocks;
+ goto err_put_subsys_clocks;
+
+ ret = clk_bulk_prepare(pd->num_subsys_clks, pd->subsys_clks);
+ if (ret)
+ goto err_unprepare_clocks;
/*
* Initially turn on all domains to make the domains usable
@@ -331,7 +383,7 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
ret = -EINVAL;
dev_err(scpsys->dev,
"power domain with id %d already exists, check your device-tree\n", id);
- goto err_unprepare_clocks;
+ goto err_unprepare_subsys_clocks;
}
pd->genpd.name = node->name;
@@ -343,8 +395,12 @@ generic_pm_domain *scpsys_add_one_domain(struct scpsys *scpsys, struct device_no
return scpsys->pd_data.domains[id];
+err_unprepare_subsys_clocks:
+ clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
err_unprepare_clocks:
clk_bulk_unprepare(pd->num_clks, pd->clks);
+err_put_subsys_clocks:
+ clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
err_put_clocks:
clk_bulk_put(pd->num_clks, pd->clks);
return ERR_PTR(ret);
@@ -421,6 +477,9 @@ static void scpsys_remove_one_domain(struct scpsys_domain *pd)
clk_bulk_unprepare(pd->num_clks, pd->clks);
clk_bulk_put(pd->num_clks, pd->clks);
+
+ clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
+ clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
}
static void scpsys_domain_cleanup(struct scpsys *scpsys)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index f190a0d9e592..20df5689739b 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -63,6 +63,8 @@ struct scpsys_bus_prot_data {
bool bus_prot_reg_update;
};
+#define MAX_SUBSYS_CLKS 10
+
/**
* struct scpsys_domain_data - scp domain data for power on/off flow
* @sta_mask: The mask for power on/off status bit.
--
2.28.0
Powered by blists - more mailing lists