lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201031113503.239191808@linuxfoundation.org>
Date:   Sat, 31 Oct 2020 12:36:49 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Russell King <linux@...linux.org.uk>,
        Jiri Slaby <jirislaby@...nel.org>,
        Peter Zijlstra <peterz@...radead.org>,
        Will Deacon <will@...nel.org>
Subject: [PATCH 5.9 67/74] serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt

From: Peter Zijlstra <peterz@...radead.org>

commit 534cf755d9df99e214ddbe26b91cd4d81d2603e2 upstream.

Issuing a magic-sysrq via the PL011 causes the following lockdep splat,
which is easily reproducible under QEMU:

  | sysrq: Changing Loglevel
  | sysrq: Loglevel set to 9
  |
  | ======================================================
  | WARNING: possible circular locking dependency detected
  | 5.9.0-rc7 #1 Not tainted
  | ------------------------------------------------------
  | systemd-journal/138 is trying to acquire lock:
  | ffffab133ad950c0 (console_owner){-.-.}-{0:0}, at: console_lock_spinning_enable+0x34/0x70
  |
  | but task is already holding lock:
  | ffff0001fd47b098 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488
  |
  | which lock already depends on the new lock.

  [...]

  |  Possible unsafe locking scenario:
  |
  |        CPU0                    CPU1
  |        ----                    ----
  |   lock(&port_lock_key);
  |                                lock(console_owner);
  |                                lock(&port_lock_key);
  |   lock(console_owner);
  |
  |  *** DEADLOCK ***

The issue being that CPU0 takes 'port_lock' on the irq path in pl011_int()
before taking 'console_owner' on the printk() path, whereas CPU1 takes
the two locks in the opposite order on the printk() path due to setting
the "console_owner" prior to calling into into the actual console driver.

Fix this in the same way as the msm-serial driver by dropping 'port_lock'
before handling the sysrq.

Cc: <stable@...r.kernel.org> # 4.19+
Cc: Russell King <linux@...linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jirislaby@...nel.org>
Link: https://lore.kernel.org/r/20200811101313.GA6970@willie-the-truck
Signed-off-by: Peter Zijlstra <peterz@...radead.org>
Tested-by: Will Deacon <will@...nel.org>
Signed-off-by: Will Deacon <will@...nel.org>
Link: https://lore.kernel.org/r/20200930120432.16551-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/tty/serial/amba-pl011.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -308,8 +308,9 @@ static void pl011_write(unsigned int val
  */
 static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 {
-	u16 status;
 	unsigned int ch, flag, fifotaken;
+	int sysrq;
+	u16 status;
 
 	for (fifotaken = 0; fifotaken != 256; fifotaken++) {
 		status = pl011_read(uap, REG_FR);
@@ -344,10 +345,12 @@ static int pl011_fifo_to_tty(struct uart
 				flag = TTY_FRAME;
 		}
 
-		if (uart_handle_sysrq_char(&uap->port, ch & 255))
-			continue;
+		spin_unlock(&uap->port.lock);
+		sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
+		spin_lock(&uap->port.lock);
 
-		uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+		if (!sysrq)
+			uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
 	}
 
 	return fifotaken;


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ