linux-kernel - [PATCH 5.9 66/74] serial: qcom_geni_serial: To correct QUP Version detection logic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201031113503.192377064@linuxfoundation.org>
Date:   Sat, 31 Oct 2020 12:36:48 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Paras Sharma <parashar@...eaurora.org>,
        Akash Asthana <akashast@...eaurora.org>
Subject: [PATCH 5.9 66/74] serial: qcom_geni_serial: To correct QUP Version detection logic

From: Paras Sharma <parashar@...eaurora.org>

commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream.

For QUP IP versions 2.5 and above the oversampling rate is
halved from 32 to 16.

Commit ce734600545f ("tty: serial: qcom_geni_serial: Update
the oversampling rate") is pushed to handle this scenario.
But the existing logic is failing to classify QUP Version 3.0
into the correct group ( 2.5 and above).

As result Serial Engine clocks are not configured properly for
baud rate and garbage data is sampled to FIFOs from the line.

So, fix the logic to detect QUP with versions 2.5 and above.

Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate")
Cc: stable <stable@...r.kernel.org>
Signed-off-by: Paras Sharma <parashar@...eaurora.org>
Reviewed-by: Akash Asthana <akashast@...eaurora.org>
Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/tty/serial/qcom_geni_serial.c |    2 +-
 include/linux/qcom-geni-se.h          |    3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1000,7 +1000,7 @@ static void qcom_geni_serial_set_termios
 	sampling_rate = UART_OVERSAMPLING;
 	/* Sampling rate is halved for IP versions >= 2.5 */
 	ver = geni_se_get_qup_hw_version(&port->se);
-	if (GENI_SE_VERSION_MAJOR(ver) >= 2 && GENI_SE_VERSION_MINOR(ver) >= 5)
+	if (ver >= QUP_SE_VERSION_2_5)
 		sampling_rate /= 2;
 
 	clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div);
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -248,6 +248,9 @@ struct geni_se {
 #define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT)
 #define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK)
 
+/* QUP SE VERSION value for major number 2 and minor number 5 */
+#define QUP_SE_VERSION_2_5                  0x20050000
+
 /*
  * Define bandwidth thresholds that cause the underlying Core 2X interconnect
  * clock to run at the named frequency. These baseline values are recommended