| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1604126068-29195-2-git-send-email-yumeng18@huawei.com>
Date: Sat, 31 Oct 2020 14:34:24 +0800
From: Meng Yu <yumeng18@...wei.com>
To: <herbert@...dor.apana.org.au>, <davem@...emloft.net>
CC: <linux-crypto@...r.kernel.org>, <xuzaibo@...wei.com>,
<wangzhou1@...ilicon.com>, <yumeng18@...wei.com>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 1/5] crypto: hisilicon/hpre - add initial settings adapt to 'Kunpeng 930'
From: Hui Tang <tanghui20@...wei.com>
HPRE device 'Kunpeng 930' is updated based on 'Kunpeng 920', and they
are not all the same, such as cluster numbers and configuration of some
registers, so we try to update this driver to make it running okay not
only on 'Kunpeng 920', but also okay on 'Kunpeng 930' in this patch.
Signed-off-by: Meng Yu <yumeng18@...wei.com>
Reviewed-by: Zaibo Xu <xuzaibo@...wei.com>
---
drivers/crypto/hisilicon/hpre/hpre.h | 8 ++-
drivers/crypto/hisilicon/hpre/hpre_main.c | 93 +++++++++++++++++++++----------
2 files changed, 68 insertions(+), 33 deletions(-)
diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h
index f69252b..181c109 100644
--- a/drivers/crypto/hisilicon/hpre/hpre.h
+++ b/drivers/crypto/hisilicon/hpre/hpre.h
@@ -14,8 +14,7 @@ enum {
HPRE_CLUSTER0,
HPRE_CLUSTER1,
HPRE_CLUSTER2,
- HPRE_CLUSTER3,
- HPRE_CLUSTERS_NUM,
+ HPRE_CLUSTER3
};
enum hpre_ctrl_dbgfs_file {
@@ -36,7 +35,10 @@ enum hpre_dfx_dbgfs_file {
HPRE_DFX_FILE_NUM
};
-#define HPRE_DEBUGFS_FILE_NUM (HPRE_DEBUG_FILE_NUM + HPRE_CLUSTERS_NUM - 1)
+#define HPRE_CLUSTERS_NUM_V2 (HPRE_CLUSTER3 + 1)
+#define HPRE_CLUSTERS_NUM_V3 1
+#define HPRE_CLUSTERS_NUM_MAX HPRE_CLUSTERS_NUM_V2
+#define HPRE_DEBUGFS_FILE_NUM (HPRE_DEBUG_FILE_NUM + HPRE_CLUSTERS_NUM_MAX - 1)
struct hpre_debugfs_file {
int index;
diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index a33394d..719f8715 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -29,6 +29,8 @@
#define HPRE_BD_ARUSR_CFG 0x301030
#define HPRE_BD_AWUSR_CFG 0x301034
#define HPRE_TYPES_ENB 0x301038
+#define HPRE_RSA_ENB BIT(0)
+#define HPRE_ECC_ENB BIT(1)
#define HPRE_DATA_RUSER_CFG 0x30103c
#define HPRE_DATA_WUSER_CFG 0x301040
#define HPRE_INT_MASK 0x301400
@@ -73,7 +75,8 @@
#define HPRE_QM_AXI_CFG_MASK 0xffff
#define HPRE_QM_VFG_AX_MASK 0xff
#define HPRE_BD_USR_MASK 0x3
-#define HPRE_CLUSTER_CORE_MASK 0xf
+#define HPRE_CLUSTER_CORE_MASK_V2 0xf
+#define HPRE_CLUSTER_CORE_MASK_V3 0xff
#define HPRE_AM_OOO_SHUTDOWN_ENB 0x301044
#define HPRE_AM_OOO_SHUTDOWN_ENABLE BIT(0)
@@ -86,6 +89,11 @@
#define HPRE_QM_PM_FLR BIT(11)
#define HPRE_QM_SRIOV_FLR BIT(12)
+#define HPRE_CLUSTERS_NUM(qm) \
+ (((qm)->ver >= QM_HW_V3) ? HPRE_CLUSTERS_NUM_V3 : HPRE_CLUSTERS_NUM_V2)
+#define HPRE_CLUSTER_CORE_MASK(qm) \
+ (((qm)->ver >= QM_HW_V3) ? HPRE_CLUSTER_CORE_MASK_V3 :\
+ HPRE_CLUSTER_CORE_MASK_V2)
#define HPRE_VIA_MSI_DSM 1
#define HPRE_SQE_MASK_OFFSET 8
#define HPRE_SQE_MASK_LEN 24
@@ -238,8 +246,40 @@ static int hpre_cfg_by_dsm(struct hisi_qm *qm)
return 0;
}
+static int hpre_set_cluster(struct hisi_qm *qm)
+{
+ u32 cluster_core_mask = HPRE_CLUSTER_CORE_MASK(qm);
+ u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
+ struct device *dev = &qm->pdev->dev;
+ unsigned long offset;
+ u32 val = 0;
+ int ret, i;
+
+ for (i = 0; i < clusters_num; i++) {
+ offset = i * HPRE_CLSTR_ADDR_INTRVL;
+
+ /* clusters initiating */
+ writel(cluster_core_mask,
+ HPRE_ADDR(qm, offset + HPRE_CORE_ENB));
+ writel(0x1, HPRE_ADDR(qm, offset + HPRE_CORE_INI_CFG));
+ ret = readl_relaxed_poll_timeout(HPRE_ADDR(qm, offset +
+ HPRE_CORE_INI_STATUS), val,
+ ((val & cluster_core_mask) ==
+ cluster_core_mask),
+ HPRE_REG_RD_INTVRL_US,
+ HPRE_REG_RD_TMOUT_US);
+ if (ret) {
+ dev_err(dev,
+ "cluster %d int st status timeout!\n", i);
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
/*
- * For Hi1620, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
+ * For Kunpeng 920, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
* Or it may stay in D3 state when we bind and unbind hpre quickly,
* as it does FLR triggered by hardware.
*/
@@ -257,9 +297,8 @@ static void disable_flr_of_bme(struct hisi_qm *qm)
static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
{
struct device *dev = &qm->pdev->dev;
- unsigned long offset;
- int ret, i;
u32 val;
+ int ret;
writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_ARUSER_M_CFG_ENABLE));
writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_AWUSER_M_CFG_ENABLE));
@@ -270,7 +309,12 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
val |= BIT(HPRE_TIMEOUT_ABNML_BIT);
writel_relaxed(val, HPRE_ADDR(qm, HPRE_QM_ABNML_INT_MASK));
- writel(0x1, HPRE_ADDR(qm, HPRE_TYPES_ENB));
+ if (qm->ver >= QM_HW_V3)
+ writel(HPRE_RSA_ENB | HPRE_ECC_ENB,
+ HPRE_ADDR(qm, HPRE_TYPES_ENB));
+ else
+ writel(HPRE_RSA_ENB, HPRE_ADDR(qm, HPRE_TYPES_ENB));
+
writel(HPRE_QM_VFG_AX_MASK, HPRE_ADDR(qm, HPRE_VFG_AXCACHE));
writel(0x0, HPRE_ADDR(qm, HPRE_BD_ENDIAN));
writel(0x0, HPRE_ADDR(qm, HPRE_INT_MASK));
@@ -291,37 +335,25 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
return -ETIMEDOUT;
}
- for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
- offset = i * HPRE_CLSTR_ADDR_INTRVL;
-
- /* clusters initiating */
- writel(HPRE_CLUSTER_CORE_MASK,
- HPRE_ADDR(qm, offset + HPRE_CORE_ENB));
- writel(0x1, HPRE_ADDR(qm, offset + HPRE_CORE_INI_CFG));
- ret = readl_relaxed_poll_timeout(HPRE_ADDR(qm, offset +
- HPRE_CORE_INI_STATUS), val,
- ((val & HPRE_CLUSTER_CORE_MASK) ==
- HPRE_CLUSTER_CORE_MASK),
- HPRE_REG_RD_INTVRL_US,
- HPRE_REG_RD_TMOUT_US);
- if (ret) {
- dev_err(dev,
- "cluster %d int st status timeout!\n", i);
- return -ETIMEDOUT;
- }
- }
-
- ret = hpre_cfg_by_dsm(qm);
+ ret = hpre_set_cluster(qm);
if (ret)
- dev_err(dev, "acpi_evaluate_dsm err.\n");
+ return -ETIMEDOUT;
- disable_flr_of_bme(qm);
+ /* This setting is only needed by Kunpeng 920. */
+ if (qm->ver == QM_HW_V2) {
+ ret = hpre_cfg_by_dsm(qm);
+ if (ret)
+ dev_err(dev, "acpi_evaluate_dsm err.\n");
+
+ disable_flr_of_bme(qm);
+ }
return ret;
}
static void hpre_cnt_regs_clear(struct hisi_qm *qm)
{
+ u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
unsigned long offset;
int i;
@@ -330,7 +362,7 @@ static void hpre_cnt_regs_clear(struct hisi_qm *qm)
writel(0x0, qm->io_base + QM_DFX_DB_CNT_VF);
/* clear clusterX/cluster_ctrl */
- for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
+ for (i = 0; i < clusters_num; i++) {
offset = HPRE_CLSTR_BASE + i * HPRE_CLSTR_ADDR_INTRVL;
writel(0x0, qm->io_base + offset + HPRE_CLUSTER_INQURY);
}
@@ -629,13 +661,14 @@ static int hpre_pf_comm_regs_debugfs_init(struct hisi_qm *qm)
static int hpre_cluster_debugfs_init(struct hisi_qm *qm)
{
+ u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
struct device *dev = &qm->pdev->dev;
char buf[HPRE_DBGFS_VAL_MAX_LEN];
struct debugfs_regset32 *regset;
struct dentry *tmp_d;
int i, ret;
- for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
+ for (i = 0; i < clusters_num; i++) {
ret = snprintf(buf, HPRE_DBGFS_VAL_MAX_LEN, "cluster%d", i);
if (ret < 0)
return -EINVAL;
--
2.8.1
Powered by blists - more mailing lists