[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201101122900.GB1269759@ravnborg.org>
Date: Sun, 1 Nov 2020 13:29:00 +0100
From: Sam Ravnborg <sam@...nborg.org>
To: Paul Cercueil <paul@...pouillou.net>
Cc: Thierry Reding <thierry.reding@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Christophe Branchereau <cbranchereau@...il.com>, od@...c.me,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/4] dt-bindings: display: Add ABT Y030XX067A panel
bindings
On Sun, Nov 01, 2020 at 09:31:48AM +0000, Paul Cercueil wrote:
> The Asia Better Technology (ABT) Y030XX067A panel is a 3.0" 320x480
> 24-bit IPS LCD panel. Its particularity is that it has non-square pixels
> (as it is 4:3 for a resolution of 320x480), and that it requires odd
> lines to be sent as RGB and even lines to be sent as GRB on its 8-bit
> bus.
>
> Signed-off-by: Paul Cercueil <paul@...pouillou.net>
> ---
> .../display/panel/abt,y030xx067a.yaml | 54 +++++++++++++++++++
> 1 file changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
> new file mode 100644
> index 000000000000..6407e8bf45fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
> +
> +description: |
> + The panel must obey the rules for a SPI slave device as specified in
> + spi/spi-controller.yaml
> +
> +maintainers:
> + - Paul Cercueil <paul@...pouillou.net>
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + const: abt,y030xx067a
> +
> + backlight: true
> + port: true
> + power-supply: true
> + reg: true
> + reset-gpios: true
The binding is missing:
required:
- compatible
- reg
- power-supply
- reset-gpios
- ...
additionalProperties: false
So r-b only with these added.
Sam
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "abt,y030xx067a";
> + reg = <0>;
> +
> + spi-max-frequency = <3125000>;
> +
> + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
> +
> + backlight = <&backlight>;
> + power-supply = <&vcc>;
> +
> + port {
> + panel_input: endpoint {
> + remote-endpoint = <&panel_output>;
> + };
> + };
> + };
> + };
> --
> 2.28.0
Powered by blists - more mailing lists