| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a49505e9-500a-1c88-b5b5-1f6ea5e94c86@linux.intel.com>
Date: Mon, 2 Nov 2020 13:59:41 +0800
From: "Ramuthevar, Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
To: Rob Herring <robh@...nel.org>
Cc: broonie@...nel.org, vigneshr@...com, tudor.ambarus@...rochip.com,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
devicetree@...r.kernel.org, miquel.raynal@...tlin.com,
simon.k.r.goldschmidt@...il.com, dinguyen@...nel.org,
richard@....at, cheol.yong.kim@...el.com, qi-ming.wu@...el.com
Subject: Re: [PATCH v6 5/6] dt-bindings: spi: Convert cadence-quadspi.txt to
cadence-quadspi.yaml
Hi Rob,
Thank you for the review comments...
On 30/10/2020 11:18 pm, Rob Herring wrote:
> On Fri, Oct 30, 2020 at 01:31:52PM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>>
>> Convert the cadence-quadspi.txt documentation to cadence-quadspi.yaml
>> remove the cadence-quadspi.txt from Documentation/devicetree/bindings/spi/
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>> ---
>> .../devicetree/bindings/spi/cadence-quadspi.txt | 67 ---------
>> .../devicetree/bindings/spi/cadence-quadspi.yaml | 149 +++++++++++++++++++++
>> 2 files changed, 149 insertions(+), 67 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.txt
>> create mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
>> deleted file mode 100644
>> index 945be7d5b236..000000000000
>> --- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
>> +++ /dev/null
>> @@ -1,67 +0,0 @@
>> -* Cadence Quad SPI controller
>> -
>> -Required properties:
>> -- compatible : should be one of the following:
>> - Generic default - "cdns,qspi-nor".
>> - For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
>> - For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor".
>> -- reg : Contains two entries, each of which is a tuple consisting of a
>> - physical address and length. The first entry is the address and
>> - length of the controller register set. The second entry is the
>> - address and length of the QSPI Controller data area.
>> -- interrupts : Unit interrupt specifier for the controller interrupt.
>> -- clocks : phandle to the Quad SPI clock.
>> -- cdns,fifo-depth : Size of the data FIFO in words.
>> -- cdns,fifo-width : Bus width of the data FIFO in bytes.
>> -- cdns,trigger-address : 32-bit indirect AHB trigger address.
>> -
>> -Optional properties:
>> -- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
>> -- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch
>> - the read data rather than the QSPI clock. Make sure that QSPI return
>> - clock is populated on the board before using this property.
>> -
>> -Optional subnodes:
>> -Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
>> -custom properties:
>> -- cdns,read-delay : Delay for read capture logic, in clock cycles
>> -- cdns,tshsl-ns : Delay in nanoseconds for the length that the master
>> - mode chip select outputs are de-asserted between
>> - transactions.
>> -- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being
>> - de-activated and the activation of another.
>> -- cdns,tchsh-ns : Delay in nanoseconds between last bit of current
>> - transaction and deasserting the device chip select
>> - (qspi_n_ss_out).
>> -- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
>> - and first bit transfer.
>> -- resets : Must contain an entry for each entry in reset-names.
>> - See ../reset/reset.txt for details.
>> -- reset-names : Must include either "qspi" and/or "qspi-ocp".
>> -
>> -Example:
>> -
>> - qspi: spi@...05000 {
>> - compatible = "cdns,qspi-nor";
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> - reg = <0xff705000 0x1000>,
>> - <0xffa00000 0x1000>;
>> - interrupts = <0 151 4>;
>> - clocks = <&qspi_clk>;
>> - cdns,is-decoded-cs;
>> - cdns,fifo-depth = <128>;
>> - cdns,fifo-width = <4>;
>> - cdns,trigger-address = <0x00000000>;
>> - resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
>> - reset-names = "qspi", "qspi-ocp";
>> -
>> - flash0: n25q00@0 {
>> - ...
>> - cdns,read-delay = <4>;
>> - cdns,tshsl-ns = <50>;
>> - cdns,tsd2d-ns = <50>;
>> - cdns,tchsh-ns = <4>;
>> - cdns,tslch-ns = <4>;
>> - };
>> - };
>> diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
>> new file mode 100644
>> index 000000000000..ec22b040d804
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
>> @@ -0,0 +1,149 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/cadence-quadspi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Cadence Quad SPI controller
>> +
>> +maintainers:
>> + - Vadivel Murugan <vadivel.muruganx.ramuthevar@...el.com>
>> +
>> +allOf:
>> + - $ref: "spi-controller.yaml#"
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - items:
>
> You don't need 'oneOf' if there is only one entry...
>
> So you've dropped 'cdns,qspi-nor' alone being valid. Granted, the txt
> file was fuzzy as to whether or not that was valid. So you have to look
> at all the dts files and see. I prefer we don't allow that and require a
> more specific compatible, but if there's a bunch then we should allow
> for it. The commit message should summarize what you decide.
we need bunch of compatibles as below, TI, Altera and Intel uses
different compatible's so we added 'oneOf'.
cdns,qspi-nor can be dropped instead I can add cadence,qspi ,because
this driver suuports qspi-nor and qspi-nand as well.
Sure, let me go through other documentation files for reference.
>
>> + - enum:
>> + - ti,k2g-qspi
>> + - ti,am654-ospi
>> + - const: cdns,qspi-nor
>
>> +examples:
>> + - |
>> + qspi: spi@...05000 {
>> + compatible = "cadence,qspi","cdns,qpsi-nor";
>
> And you missed fixing this.
Yes, fixed by "cadence,qspi" keeping alone, need to remove
cdns,qspi-nor, thanks!
Regards
Vadivel
>
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0xff705000 0x1000>,
>> + <0xffa00000 0x1000>;
>> + interrupts = <0 151 4>;
>> + clocks = <&qspi_clk>;
>> + cdns,fifo-depth = <128>;
>> + cdns,fifo-width = <4>;
>> + cdns,trigger-address = <0x00000000>;
>> + resets = <&rst 0x1>, <&rst 0x2>;
>> + reset-names = "qspi", "qspi-ocp";
>> +
>> + flash@0 {
>> + compatible = "jedec,spi-nor";
>> + reg = <0x0>;
>> + cdns,read-delay = <4>;
>> + cdns,tshsl-ns = <50>;
>> + cdns,tsd2d-ns = <50>;
>> + cdns,tchsh-ns = <4>;
>> + cdns,tslch-ns = <4>;
>> + };
>> +
>> + };
>> +
>> +...
>> --
>> 2.11.0
>>
Powered by blists - more mailing lists