Message-ID: <CAFA6WYP1VOgNFuh+E0BOB3T5v+Brf3jCQsKf8iVTTMje6Mte9g@mail.gmail.com>
Date:   Mon, 2 Nov 2020 12:29:48 +0530
From:   Sumit Garg <sumit.garg@...aro.org>
To:     Daniel Thompson <daniel.thompson@...aro.org>
Cc:     Marc Zyngier <maz@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Russell King - ARM Linux admin <linux@...linux.org.uk>,
        tsbogend@...ha.franken.de, mpe@...erman.id.au,
        "David S. Miller" <davem@...emloft.net>, mingo@...hat.com,
        bp@...en8.de, x86@...nel.org, Mark Rutland <mark.rutland@....com>,
        julien.thierry.kdev@...il.com,
        Douglas Anderson <dianders@...omium.org>,
        Jason Wessel <jason.wessel@...driver.com>,
        Masayoshi Mizuma <msys.mizuma@...il.com>,
        ito-yuichi@...itsu.com, kgdb-bugreport@...ts.sourceforge.net,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 7/7] arm64: kgdb: Roundup cpus using IPI as NMI

On Thu, 29 Oct 2020 at 22:09, Daniel Thompson
<daniel.thompson@...aro.org> wrote:
>
> On Thu, Oct 29, 2020 at 04:22:34PM +0000, Daniel Thompson wrote:
> > On Thu, Oct 29, 2020 at 08:26:27PM +0530, Sumit Garg wrote:
> > > arm64 platforms with GICv3 or later supports pseudo NMIs which can be
> > > leveraged to roundup CPUs which are stuck in hard lockup state with
> > > interrupts disabled that wouldn't be possible with a normal IPI.
> > >
> > > So instead switch to roundup CPUs using IPI turned as NMI. And in
> > > case a particular arm64 platform doesn't supports pseudo NMIs,
> > > it will switch back to default kgdb CPUs roundup mechanism.
> > >
> > > Signed-off-by: Sumit Garg <sumit.garg@...aro.org>
> > > ---
> > >  arch/arm64/include/asm/kgdb.h |  9 +++++++++
> > >  arch/arm64/kernel/ipi_nmi.c   |  5 +++++
> > >  arch/arm64/kernel/kgdb.c      | 35 +++++++++++++++++++++++++++++++++++
> > >  3 files changed, 49 insertions(+)
> > >
> > > diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h
> > > index 21fc85e..c3d2425 100644
> > > --- a/arch/arm64/include/asm/kgdb.h
> > > +++ b/arch/arm64/include/asm/kgdb.h
> > > @@ -24,6 +24,15 @@ static inline void arch_kgdb_breakpoint(void)
> > >  extern void kgdb_handle_bus_error(void);
> > >  extern int kgdb_fault_expected;
> > >
> > > +#ifdef CONFIG_KGDB
> > > +extern bool kgdb_ipi_nmicallback(int cpu, void *regs);
> > > +#else
> > > +static inline bool kgdb_ipi_nmicallback(int cpu, void *regs)
> > > +{
> > > +   return false;
> > > +}
> > > +#endif
> > > +
> > >  #endif /* !__ASSEMBLY__ */
> > >
> > >  /*
> > > diff --git a/arch/arm64/kernel/ipi_nmi.c b/arch/arm64/kernel/ipi_nmi.c
> > > index 597dcf7..6ace182 100644
> > > --- a/arch/arm64/kernel/ipi_nmi.c
> > > +++ b/arch/arm64/kernel/ipi_nmi.c
> > > @@ -8,6 +8,7 @@
> > >
> > >  #include <linux/interrupt.h>
> > >  #include <linux/irq.h>
> > > +#include <linux/kgdb.h>
> > >  #include <linux/nmi.h>
> > >  #include <linux/smp.h>
> > >
> > > @@ -45,10 +46,14 @@ bool arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
> > >  static irqreturn_t ipi_nmi_handler(int irq, void *data)
> > >  {
> > >     irqreturn_t ret = IRQ_NONE;
> > > +   unsigned int cpu = smp_processor_id();
> > >
> > >     if (nmi_cpu_backtrace(get_irq_regs()))
> > >             ret = IRQ_HANDLED;
> > >
> > > +   if (kgdb_ipi_nmicallback(cpu, get_irq_regs()))
> > > +           ret = IRQ_HANDLED;
> > > +
> > >     return ret;
> >
> > It would be better to declare existing return value for
> > kgdb_nmicallback() to be dangerously stupid and fix it so it returns an
> > irqreturn_t (that's easy since most callers do not need to check the
> > return value).
> >
> > Then this code simply becomes:
> >
> >       return kgdb_nmicallback(cpu, get_irq_regs());
>
> Actually, reflecting on this maybe it is better to keep kgdb_nmicallin()
> and kgdb_nmicallback() aligned w.r.t. return codes (even if they are a
> little unusual).
>
> I'm still not sure why we'd keep kgdb_ipi_nmicallback() though.
> kgdb_nmicallback() is intended to be called from arch code...
>

I added kgdb_ipi_nmicallback() just to add a check for "kgdb_active"
prior to entry into kgdb as here we are sharing NMI among backtrace
and kgdb.

But after your comments, I looked carefully into kgdb_nmicallback()
and I see the "raw_spin_is_locked(&dbg_master_lock)" check as well. So
it looked sufficient to me for calling kgdb_nmicallback() directly
from the arch code and hence I will remove kgdb_ipi_nmicallback() in
the next version.

>
> Daniel.
>
>
> >
> >
> > >  }
> > >
> > > diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
> > > index 1a157ca3..c26e710 100644
> > > --- a/arch/arm64/kernel/kgdb.c
> > > +++ b/arch/arm64/kernel/kgdb.c
> > > @@ -17,6 +17,7 @@
> > >
> > >  #include <asm/debug-monitors.h>
> > >  #include <asm/insn.h>
> > > +#include <asm/nmi.h>
> > >  #include <asm/traps.h>
> > >
> > >  struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
> > > @@ -353,3 +354,37 @@ int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
> > >     return aarch64_insn_write((void *)bpt->bpt_addr,
> > >                     *(u32 *)bpt->saved_instr);
> > >  }
> > > +
> > > +bool kgdb_ipi_nmicallback(int cpu, void *regs)
> > > +{
> > > +   if (atomic_read(&kgdb_active) != -1) {
> > > +           kgdb_nmicallback(cpu, regs);
> > > +           return true;
> > > +   }
> > > +
> > > +   return false;
> > > +}
> >
> > I *really* don't like this function.
> >
> > If the return code of kgdb_nmicallback() is broken then fix it, don't
> > just wrap it and invent a new criteria for the return code.
> >
> > To be honest I don't actually think the logic in kgdb_nmicallback() is
> > broken. As mentioned above the return value has a weird definition (0
> > for "handled it OK" and 1 for "nothing for me to do") but the logic to
> > calculate the return code looks OK.
> >

Makes sense, will remove it instead.

> >
> > > +
> > > +static void kgdb_smp_callback(void *data)
> > > +{
> > > +   unsigned int cpu = smp_processor_id();
> > > +
> > > +   if (atomic_read(&kgdb_active) != -1)
> > > +           kgdb_nmicallback(cpu, get_irq_regs());
> > > +}
> >
> > This is Unused. I presume it is litter from a previous revision of the
> > code and can be deleted?
> >

Yeah.

> >
> > > +
> > > +bool kgdb_arch_roundup_cpus(void)
> > > +{
> > > +   struct cpumask mask;
> > > +
> > > +   if (!arm64_supports_nmi())
> > > +           return false;
> > > +
> > > +   cpumask_copy(&mask, cpu_online_mask);
> > > +   cpumask_clear_cpu(raw_smp_processor_id(), &mask);
> > > +   if (cpumask_empty(&mask))
> > > +           return false;
> >
> > Why do we need to fallback if there is no work to do? There will still
> > be no work to do when we call the fallback.

Okay, won't switch back to fallback mode here.

-Sumit

> >
> >
> > Daniel.

Powered by blists - more mailing lists