linux-kernel - [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201102101154.13598-7-kishon@ti.com>
Date:   Mon, 2 Nov 2020 15:41:52 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Tero Kristo <t-kristo@...com>, Nishanth Menon <nm@...com>
CC:     Roger Quadros <rogerq@...com>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
to PCIe and QSGMII (multi-link SERDES).

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 .../dts/ti/k3-j7200-common-proc-board.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index ef03e7636b66..65a2e5aeb050 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -8,6 +8,7 @@
 #include "k3-j7200-som-p0.dtsi"
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	chosen {
@@ -213,3 +214,25 @@
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
 };
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
-- 
2.17.1