linux-kernel - Re: [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <52413556-ec13-e428-7139-01d323697ebc@centosproject.org>
Date:   Mon, 2 Nov 2020 11:21:14 -0300
From:   Pablo Sebastián Greco <pgreco@...tosproject.org>
To:     Maxime Ripard <maxime@...no.tech>
Cc:     linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Hans de Goede <hdegoede@...hat.com>,
        Icenowy Zheng <icenowy@...c.io>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on
 Ethernet PHY


On 2/11/20 11:07, Maxime Ripard wrote:
> Hi,
>
> On Sat, Oct 31, 2020 at 09:34:15PM -0300, Pablo Greco wrote:
>> The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on
>> the PHY, using pull-ups on the RXDLY and TXDLY pins.
>>
>> Fix the phy-mode description to correct reflect this so that the
>> implementation doesn't reconfigure the delays incorrectly. This
>> happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
>> rx/tx delay config").
>>
>> Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board")
>> Signed-off-by: Pablo Greco <pgreco@...tosproject.org>
> Thanks for sending those patches.
>
> However, I'm not entirely sure how you sent it but the odd threading you
> used (each other patches being in reply to this one without 0/N in the
> name) seem to confuse the tools we use to apply the patches.
>
> Can you resend it properly?
> Thanks!
> Maxime
I prepared them individually but sent them together in a single 
git-send-email, that must have been the problem.
I"ll send them again one by one.

Pablo.