| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f7562a2492aa83afa8a3a511428ed1959b8e8c72.camel@linux.intel.com>
Date: Tue, 03 Nov 2020 09:09:18 -0800
From: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
To: Victor Ding <victording@...gle.com>,
Zhang Rui <rui.zhang@...el.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Kim Phillips <kim.phillips@....com>, linux-pm@...r.kernel.org,
Borislav Petkov <bp@...en8.de>,
"H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...hat.com>,
Joerg Roedel <jroedel@...e.de>,
Kan Liang <kan.liang@...ux.intel.com>,
Pawan Gupta <pawan.kumar.gupta@...ux.intel.com>,
"Peter Zijlstra (Intel)" <peterz@...radead.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Sean Christopherson <sean.j.christopherson@...el.com>,
Thomas Gleixner <tglx@...utronix.de>,
Tony Luck <tony.luck@...el.com>,
Vineela Tummalapalli <vineela.tummalapalli@...el.com>,
x86@...nel.org
Subject: Re: [PATCH v3 3/4] powercap: Add AMD Fam17h RAPL support
On Tue, 2020-11-03 at 17:10 +1100, Victor Ding wrote:
> On Mon, Nov 2, 2020 at 12:39 PM Zhang Rui <rui.zhang@...el.com>
> wrote:
> > On Tue, 2020-10-27 at 07:23 +0000, Victor Ding wrote:
> > > This patch enables AMD Fam17h RAPL support for the power capping
> > > framework. The support is as per AMD Fam17h Model31h (Zen2) and
> > > model 00-ffh (Zen1) PPR.
> > >
> > > Tested by comparing the results of following two sysfs entries
> > > and
> > > the
> > > values directly read from corresponding MSRs via
> > > /dev/cpu/[x]/msr:
> > > /sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj
> > > /sys/class/powercap/intel-rapl/intel-rapl:0/intel-
> > > rapl:0:0/energy_uj
Is this for just energy reporting? No capping of power?
Thanks,
Srinivas
> > >
> > > Signed-off-by: Victor Ding <victording@...gle.com>
> > > Acked-by: Kim Phillips <kim.phillips@....com>
> > >
> > >
> > > ---
> > >
> > > Changes in v3:
> > > By Victor Ding <victording@...gle.com>
> > > - Rebased to the latest code.
> > > - Created a new rapl_defaults for AMD CPUs.
> > > - Removed redundant setting to zeros.
> > > - Stopped using the fake power limit domain 1.
> > >
> > > Changes in v2:
> > > By Kim Phillips <kim.phillips@....com>:
> > > - Added Kim's Acked-by.
> > > - Added Daniel Lezcano to Cc.
> > > - (No code change).
> > >
> > > arch/x86/include/asm/msr-index.h | 1 +
> > > drivers/powercap/intel_rapl_common.c | 6 ++++++
> > > drivers/powercap/intel_rapl_msr.c | 20 +++++++++++++++++++-
> > > 3 files changed, 26 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/x86/include/asm/msr-index.h
> > > b/arch/x86/include/asm/msr-index.h
> > > index 21917e134ad4..c36a083c8ec0 100644
> > > --- a/arch/x86/include/asm/msr-index.h
> > > +++ b/arch/x86/include/asm/msr-index.h
> > > @@ -327,6 +327,7 @@
> > > #define MSR_PP1_POLICY 0x00000642
> > >
> > > #define MSR_AMD_RAPL_POWER_UNIT 0xc0010299
> > > +#define MSR_AMD_CORE_ENERGY_STATUS 0xc001029a
> > > #define MSR_AMD_PKG_ENERGY_STATUS 0xc001029b
> > >
> > > /* Config TDP MSRs */
> > > diff --git a/drivers/powercap/intel_rapl_common.c
> > > b/drivers/powercap/intel_rapl_common.c
> > > index 0b2830efc574..bedd780bed12 100644
> > > --- a/drivers/powercap/intel_rapl_common.c
> > > +++ b/drivers/powercap/intel_rapl_common.c
> > > @@ -1011,6 +1011,10 @@ static const struct rapl_defaults
> > > rapl_defaults_cht = {
> > > .compute_time_window = rapl_compute_time_window_atom,
> > > };
> > >
> > > +static const struct rapl_defaults rapl_defaults_amd = {
> > > + .check_unit = rapl_check_unit_core,
> > > +};
> > > +
> >
> > why do we need power_unit and time_unit if we only want to expose
> > the
> > energy counter?
> AMD's Power Unit MSR provides identical information as Intel's,
> including
> time units, power units, and energy status units. By reusing the
> check unit
> method, we could avoid code duplication as well as easing future
> enhance-
> ment when AMD starts to support power limits.
> > Plus, in rapl_init_domains(), PL1 is enabled for every RAPL Domain
> > blindly, I'm not sure how this is handled on the AMD CPUs.
> > Is PL1 invalidated by rapl_detect_powerlimit()? or is it still
> > registered as a valid constraint into powercap sysfs I/F?
> AMD's CORE_ENERGY_STAT MSR is like Intel's PP0_ENERGY_STATUS;
> therefore, PL1 also always exists on AMD. rapl_detect_powerlimit()
> correctly
> markes the domain as monitoring-only after finding power limit MSRs
> do not
> exist.
> > Currently, the code makes the assumption that there is only on
> > power
> > limit if priv->limits[domain_id] not set, we probably need to
> > change
> > this if we want to support RAPL domains with no power limit.
> The existing code already supports RAPL domains with no power limit:
> PL1 is
> enabled when there is zero or one power limit,
> rapl_detect_powerlimit() will then
> mark if PL1 is monitoring-only if power limit MSRs do not exist. Both
> AMD's RAPL
> domains are monitoring-only and are correctly marked and handled.
> > thanks,
> > rui
> > > static const struct x86_cpu_id rapl_ids[] __initconst = {
> > > X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE, &rapl_defau
> > > lt
> > > s_core),
> > > X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X, &rapl_defau
> > > lts_core),
> > > @@ -1061,6 +1065,8 @@ static const struct x86_cpu_id rapl_ids[]
> > > __initconst = {
> > >
> > > X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &rapl_defau
> > > lts_hsw_se
> > > rver),
> > > X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &rapl_defau
> > > lts_hsw_se
> > > rver),
> > > +
> > > + X86_MATCH_VENDOR_FAM(AMD, 0x17, &rapl_defaults_amd),
> > > {}
> > > };
> > > MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
> > > diff --git a/drivers/powercap/intel_rapl_msr.c
> > > b/drivers/powercap/intel_rapl_msr.c
> > > index a819b3b89b2f..78213d4b5b16 100644
> > > --- a/drivers/powercap/intel_rapl_msr.c
> > > +++ b/drivers/powercap/intel_rapl_msr.c
> > > @@ -49,6 +49,14 @@ static struct rapl_if_priv rapl_msr_priv_intel
> > > = {
> > > .limits[RAPL_DOMAIN_PLATFORM] = 2,
> > > };
> > >
> > > +static struct rapl_if_priv rapl_msr_priv_amd = {
> > > + .reg_unit = MSR_AMD_RAPL_POWER_UNIT,
> > > + .regs[RAPL_DOMAIN_PACKAGE] = {
> > > + 0, MSR_AMD_PKG_ENERGY_STATUS, 0, 0, 0 },
> > > + .regs[RAPL_DOMAIN_PP0] = {
> > > + 0, MSR_AMD_CORE_ENERGY_STATUS, 0, 0, 0 },
> > > +};
> > > +
> > > /* Handles CPU hotplug on multi-socket systems.
> > > * If a CPU goes online as the first CPU of the physical package
> > > * we add the RAPL package to the system. Similarly, when the
> > > last
> > > @@ -138,7 +146,17 @@ static int rapl_msr_probe(struct
> > > platform_device
> > > *pdev)
> > > const struct x86_cpu_id *id =
> > > x86_match_cpu(pl4_support_ids);
> > > int ret;
> > >
> > > - rapl_msr_priv = &rapl_msr_priv_intel;
> > > + switch (boot_cpu_data.x86_vendor) {
> > > + case X86_VENDOR_INTEL:
> > > + rapl_msr_priv = &rapl_msr_priv_intel;
> > > + break;
> > > + case X86_VENDOR_AMD:
> > > + rapl_msr_priv = &rapl_msr_priv_amd;
> > > + break;
> > > + default:
> > > + pr_err("intel-rapl does not support CPU vendor
> > > %d\n",
> > > boot_cpu_data.x86_vendor);
> > > + return -ENODEV;
> > > + }
> > > rapl_msr_priv->read_raw = rapl_msr_read_raw;
> > > rapl_msr_priv->write_raw = rapl_msr_write_raw;
> > >
> Best regards,
> Victor Ding
Powered by blists - more mailing lists