[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201104183859.590f0806@xps13>
Date: Wed, 4 Nov 2020 18:38:59 +0100
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Christophe Leroy <christophe.leroy@...roup.eu>
Cc: linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linux-mtd@...ts.infradead.org
Subject: Re: Kernel 5.10-rc1 not mounting NAND flash (Bisected to
d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing
bits"))
Hi Christophe,
Christophe Leroy <christophe.leroy@...roup.eu> wrote on Wed, 04 Nov
2020 18:33:53 +0100:
> Hi Miquel,
>
> I'm unable to boot 5.10-rc1 on my boards. I get the following error:
>
> [ 4.125811] nand: device found, Manufacturer ID: 0xad, Chip ID: 0x76
> [ 4.131992] nand: Hynix NAND 64MiB 3,3V 8-bit
> [ 4.136173] nand: 64 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
> [ 4.143534] ------------[ cut here ]------------
> [ 4.147934] Unsupported ECC algorithm!
> [ 4.152142] WARNING: CPU: 0 PID: 1 at drivers/mtd/nand/raw/nand_base.c:5244 nand_scan_with_ids+0x1260/0x1640
> ...
> [ 4.332052] ---[ end trace e3a36f62cae4ac56 ]---
> [ 4.336882] gpio-nand: probe of c0000000.nand failed with error -22
>
> Bisected to commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
>
> My first impression is that with that change, the value set in chip->ecc.algo
> by gpio_nand_probe() in drivers/mtd/nand/raw/gpio.c gets overwritten in rawnand_dt_init()
>
> The following change fixes the problem, though I'm not sure it is the right fix. Can you have a look ?
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 1f0d542d5923..aa74797cf2da 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5032,7 +5032,8 @@ static int rawnand_dt_init(struct nand_chip *chip)
> chip->ecc.engine_type = nand->ecc.defaults.engine_type;
>
> chip->ecc.placement = nand->ecc.user_conf.placement;
> - chip->ecc.algo = nand->ecc.user_conf.algo;
> + if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
> + chip->ecc.algo = nand->ecc.user_conf.algo;
> chip->ecc.strength = nand->ecc.user_conf.strength;
> chip->ecc.size = nand->ecc.user_conf.step_size;
>
> ---
>
> Thanks
> Christophe
Sorry for introducing this issue, I didn't had the time to send the
Fixes PR yet but I think this issue has been solved already. Could
you please try with a recent linux-next?
Thanks,
Miquèl
Powered by blists - more mailing lists