[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201104192933.1001-1-m.reichl@fivetechno.de>
Date: Wed, 4 Nov 2020 20:29:31 +0100
From: Markus Reichl <m.reichl@...etechno.de>
To: linux-rockchip@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>
Cc: dianders@...omium.org, robin.murphy@....com, wens@...nel.org,
Markus Reichl <m.reichl@...etechno.de>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
After patch [1] SD-card becomes mmc1 and eMMC becomes mmc2.
Correct trigger of LEDs accordingly.
[1]
https://patchwork.kernel.org/patch/11881427
Signed-off-by: Markus Reichl <m.reichl@...etechno.de>
---
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index e7a459fa4322..20309076dbac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -74,14 +74,14 @@ diy_led: led-1 {
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc1";
+ linux,default-trigger = "mmc2";
};
yellow_led: led-2 {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc0";
+ linux,default-trigger = "mmc1";
};
};
--
2.28.0
Powered by blists - more mailing lists