linux-kernel - [PATCH v2 2/2] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201104202952.783724-3-npcomplete13@gmail.com>
Date:   Wed,  4 Nov 2020 15:29:52 -0500
From:   Vivek Unune <npcomplete13@...il.com>
To:     florian.fainelli@...adcom.com, hauke@...ke-m.de, zajec5@...il.com,
        bcm-kernel-feedback-list@...adcom.com, robh+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Vivek Unune <npcomplete13@...il.com>
Subject: [PATCH v2 2/2] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl

Now that we have a pin controller, use that instead of manuplating the
mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux

Signed-off-by: Vivek Unune <npcomplete13@...il.com>
---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 26 +++----------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 507af23e227f..3bb3fe5bfbf8 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -123,33 +123,13 @@ bluebar8 {
 		};
 	};
 
-	mdio-bus-mux {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	mdio-bus-mux@...03000 {
 
 		/* BIT(9) = 1 => external mdio */
-		mdio_ext: mdio@200 {
+		mdio@200 {
 			reg = <0x200>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-		};
-	};
-
-	mdio-mii-mux {
-		compatible = "mdio-mux-mmioreg";
-		mdio-parent-bus = <&mdio_ext>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x1800c1c0 0x4>;
-
-		/* BIT(6) = mdc, BIT(7) = mdio */
-		mux-mask = <0xc0>;
-
-		mdio-mii@0 {
-			/* Enable MII function */
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			switch@0  {
 				compatible = "brcm,bcm53125";
@@ -159,6 +139,8 @@ switch@0  {
 				reset-names = "robo_reset";
 				reg = <0>;
 				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
 
 				ports {
 					#address-cells = <1>;
-- 
2.25.1