Message-ID: <20201105174317.GA4294@char.us.oracle.com>
Date:   Thu, 5 Nov 2020 12:43:17 -0500
From:   Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
To:     Ashish Kalra <ashish.kalra@....com>
Cc:     hch@....de, tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
        hpa@...or.com, x86@...nel.org, luto@...nel.org,
        peterz@...radead.org, dave.hansen@...ux-intel.com,
        iommu@...ts.linux-foundation.org, linux-kernel@...r.kernel.org,
        brijesh.singh@....com, Thomas.Lendacky@....com,
        ssg.sos.patches@....com
Subject: Re: [PATCH v3] swiotlb: Adjust SWIOTBL bounce buffer size for SEV
 guests.

On Wed, Nov 04, 2020 at 10:39:13PM +0000, Ashish Kalra wrote:
> Hello Konrad,
> 
> On Wed, Nov 04, 2020 at 05:14:52PM -0500, Konrad Rzeszutek Wilk wrote:
> > On Wed, Nov 04, 2020 at 10:08:04PM +0000, Ashish Kalra wrote:
> > > From: Ashish Kalra <ashish.kalra@....com>
> > > 
> > > For SEV, all DMA to and from guest has to use shared
> > > (un-encrypted) pages. SEV uses SWIOTLB to make this
> > > happen without requiring changes to device drivers.
> > > However, depending on workload being run, the default
> > > 64MB of SWIOTLB might not be enough and SWIOTLB
> > > may run out of buffers to use for DMA, resulting
> > > in I/O errors and/or performance degradation for
> > > high I/O workloads.
> > > 
> > > Increase the default size of SWIOTLB for SEV guests
> > > using a minimum value of 128MB and a maximum value
> > 
> > <blinks>
> > 
> > 64MB for a 1GB VM is not enough?
> > 
> > > of 512MB, determining on amount of provisioned guest
> > 
> > I like the implementation on how this is done.. but
> > the choices of memory and how much seems very much
> > random. Could there be some math behind this?
> >
> 
> Earlier the patch was based on using a % of guest memory, as below:
> 
> +#define SEV_ADJUST_SWIOTLB_SIZE_PERCENT        5
> +#define SEV_ADJUST_SWIOTLB_SIZE_MAX    (1UL << 30)
> ...
> ...
> +       if (sev_active() && !io_tlb_nslabs) {
> +               unsigned long total_mem = get_num_physpages() << PAGE_SHIFT;
> +
> +               default_size = total_mem *
> +                       SEV_ADJUST_SWIOTLB_SIZE_PERCENT / 100;
> +
> +               default_size = ALIGN(default_size, 1 << IO_TLB_SHIFT);
> +
> +               default_size = clamp_val(default_size, IO_TLB_DEFAULT_SIZE,
> +                       SEV_ADJUST_SWIOTLB_SIZE_MAX);
> +       }
> 
> But, then it is difficult to predict what % of guest memory to use ?
> 
> Then there are other factors to consider, such as vcpu_count or if there
> is going to be high I/O workload, etc.
> 
> But that all makes it very complicated, what we basically want is a
> range from 128M to 512M and that's why the current patch which picks up
> this range from the amount of allocated guest memory keeps it simple. 

Right, so I am wondering if we can do this better.

That is you are never going to get any 32-bit devices with SEV right? That
is there is nothing that bounds you to always use the memory below 4GB?

What I wonder is if we can combine the boot-allocation of the SWIOTLB
with the post-boot-allocation of SWIOLTB to stitch together
continous physical ranges.

That way you have the flexibility at the start of using 64MB but if there
is pressure, we grow to a bigger size?

> 
> Thanks,
> Ashish
> 
> > > memory.
> > > 
> > > Using late_initcall() interface to invoke
> > > swiotlb_adjust() does not work as the size
> > > adjustment needs to be done before mem_encrypt_init()
> > > and reserve_crashkernel() which use the allocated
> > > SWIOTLB buffer size, hence calling it explicitly
> > > from setup_arch().
> > > 
> > > The SWIOTLB default size adjustment is added as an
> > > architecture specific interface/callback to allow
> > > architectures such as those supporting memory
> > > encryption to adjust/expand SWIOTLB size for their
> > > use.
> > > 
> > > Signed-off-by: Ashish Kalra <ashish.kalra@....com>
> > > ---
> > >  arch/x86/kernel/setup.c   |  2 ++
> > >  arch/x86/mm/mem_encrypt.c | 42 +++++++++++++++++++++++++++++++++++++++
> > >  include/linux/swiotlb.h   |  1 +
> > >  kernel/dma/swiotlb.c      | 27 +++++++++++++++++++++++++
> > >  4 files changed, 72 insertions(+)
> > > 
> > > diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> > > index 3511736fbc74..b073d58dd4a3 100644
> > > --- a/arch/x86/kernel/setup.c
> > > +++ b/arch/x86/kernel/setup.c
> > > @@ -1166,6 +1166,8 @@ void __init setup_arch(char **cmdline_p)
> > >  	if (boot_cpu_has(X86_FEATURE_GBPAGES))
> > >  		hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
> > >  
> > > +	swiotlb_adjust();
> > > +
> > >  	/*
> > >  	 * Reserve memory for crash kernel after SRAT is parsed so that it
> > >  	 * won't consume hotpluggable memory.
> > > diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
> > > index 3f248f0d0e07..e0deb157cddd 100644
> > > --- a/arch/x86/mm/mem_encrypt.c
> > > +++ b/arch/x86/mm/mem_encrypt.c
> > > @@ -489,7 +489,49 @@ static void print_mem_encrypt_feature_info(void)
> > >  	pr_cont("\n");
> > >  }
> > >  
> > > +#define TOTAL_MEM_1G	0x40000000UL
> > > +#define TOTAL_MEM_4G	0x100000000UL
> > > +
> > > +#define SIZE_128M (128UL<<20)
> > > +#define SIZE_256M (256UL<<20)
> > > +#define SIZE_512M (512UL<<20)
> > > +
> > >  /* Architecture __weak replacement functions */
> > > +unsigned long __init arch_swiotlb_adjust(unsigned long iotlb_default_size)
> > > +{
> > > +	unsigned long size = 0;
> > > +
> > > +	/*
> > > +	 * For SEV, all DMA has to occur via shared/unencrypted pages.
> > > +	 * SEV uses SWOTLB to make this happen without changing device
> > > +	 * drivers. However, depending on the workload being run, the
> > > +	 * default 64MB of SWIOTLB may not be enough & SWIOTLB may
> > > +	 * run out of buffers for DMA, resulting in I/O errors and/or
> > > +	 * performance degradation especially with high I/O workloads.
> > > +	 * Increase the default size of SWIOTLB for SEV guests using
> > > +	 * a minimum value of 128MB and a maximum value of 512MB,
> > > +	 * depending on amount of provisioned guest memory.
> > > +	 */
> > > +	if (sev_active()) {
> > > +		phys_addr_t total_mem = memblock_phys_mem_size();
> > > +
> > > +		if (total_mem <= TOTAL_MEM_1G)
> > > +			size = clamp(iotlb_default_size * 2, SIZE_128M,
> > > +				     SIZE_128M);
> > > +		else if (total_mem <= TOTAL_MEM_4G)
> > > +			size = clamp(iotlb_default_size * 4, SIZE_256M,
> > > +				     SIZE_256M);
> > > +		else
> > > +			size = clamp(iotlb_default_size * 8, SIZE_512M,
> > > +				     SIZE_512M);
> > > +
> > > +		pr_info("SEV adjusted max SWIOTLB size = %luMB",
> > > +			size >> 20);
> > > +	}
> > > +
> > > +	return size;
> > > +}
> > > +
> > >  void __init mem_encrypt_init(void)
> > >  {
> > >  	if (!sme_me_mask)
> > > diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
> > > index 046bb94bd4d6..01ae6d891327 100644
> > > --- a/include/linux/swiotlb.h
> > > +++ b/include/linux/swiotlb.h
> > > @@ -33,6 +33,7 @@ extern void swiotlb_init(int verbose);
> > >  int swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
> > >  extern unsigned long swiotlb_nr_tbl(void);
> > >  unsigned long swiotlb_size_or_default(void);
> > > +extern void __init swiotlb_adjust(void);
> > >  extern int swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs);
> > >  extern void __init swiotlb_update_mem_attributes(void);
> > >  
> > > diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
> > > index c19379fabd20..66a9e627bb51 100644
> > > --- a/kernel/dma/swiotlb.c
> > > +++ b/kernel/dma/swiotlb.c
> > > @@ -163,6 +163,33 @@ unsigned long swiotlb_size_or_default(void)
> > >  	return size ? size : (IO_TLB_DEFAULT_SIZE);
> > >  }
> > >  
> > > +unsigned long __init __weak arch_swiotlb_adjust(unsigned long size)
> > > +{
> > > +	return 0;
> > > +}
> > > +
> > > +void __init swiotlb_adjust(void)
> > > +{
> > > +	unsigned long size;
> > > +
> > > +	/*
> > > +	 * If swiotlb parameter has not been specified, give a chance to
> > > +	 * architectures such as those supporting memory encryption to
> > > +	 * adjust/expand SWIOTLB size for their use.
> > > +	 */
> > > +	if (!io_tlb_nslabs) {
> > > +		size = arch_swiotlb_adjust(IO_TLB_DEFAULT_SIZE);
> > > +		if (size) {
> > > +			size = ALIGN(size, 1 << IO_TLB_SHIFT);
> > > +			io_tlb_nslabs = size >> IO_TLB_SHIFT;
> > > +			io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
> > > +
> > > +			pr_info("architecture adjusted SWIOTLB slabs = %lu\n",
> > > +				io_tlb_nslabs);
> > > +		}
> > > +	}
> > > +}
> > > +
> > >  void swiotlb_print_info(void)
> > >  {
> > >  	unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT;
> > > -- 
> > > 2.17.1
> > > 

Powered by blists - more mailing lists