| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 5 Nov 2020 03:06:00 +0100
From: Maximilian Luz <luzmaximilian@...il.com>
To: linux-acpi@...r.kernel.org
Cc: Maximilian Luz <luzmaximilian@...il.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Joe Perches <joe@...ches.com>,
Dan Williams <dan.j.williams@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>,
Dave Jiang <dave.jiang@...el.com>,
Ira Weiny <ira.weiny@...el.com>, linux-pci@...r.kernel.org,
linux-nvdimm@...ts.01.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] ACPI: Fix whitespace inconsistencies
Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.
Signed-off-by: Maximilian Luz <luzmaximilian@...il.com>
---
Was previously: ACPI: Remove trailing whitespace
Changes in v2:
- Use checkpatch to scan for inconsistent indentations and fix them
too, i.e. replace spaces with tabs where appropriate.
---
drivers/acpi/acpi_video.c | 6 +++---
drivers/acpi/battery.c | 2 +-
drivers/acpi/event.c | 2 +-
drivers/acpi/internal.h | 2 +-
drivers/acpi/nfit/core.c | 10 +++++-----
drivers/acpi/pci_irq.c | 2 +-
drivers/acpi/pci_link.c | 12 ++++++------
drivers/acpi/pci_mcfg.c | 2 +-
drivers/acpi/power.c | 6 +++---
drivers/acpi/processor_perflib.c | 6 +++---
drivers/acpi/sbs.c | 2 +-
drivers/acpi/sbshc.c | 2 +-
drivers/acpi/sbshc.h | 6 +++---
drivers/acpi/video_detect.c | 16 ++++++++--------
drivers/acpi/wakeup.c | 4 ++--
15 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index bc96457c9e25..a322a7bd286b 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -578,7 +578,7 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,
ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
level = device->brightness->levels[bqc_value +
- ACPI_VIDEO_FIRST_LEVEL];
+ ACPI_VIDEO_FIRST_LEVEL];
} else {
level = bqc_value;
}
@@ -990,8 +990,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "found %d brightness levels\n",
- br->count - ACPI_VIDEO_FIRST_LEVEL));
+ "found %d brightness levels\n",
+ br->count - ACPI_VIDEO_FIRST_LEVEL));
return 0;
out_free_levels:
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index cab4af532f36..08ee1c7b12e0 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -987,7 +987,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume)
*/
if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
(test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
- (battery->capacity_now <= battery->alarm)))
+ (battery->capacity_now <= battery->alarm)))
acpi_pm_wakeup_event(&battery->device->dev);
return result;
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index 170643927044..92e59f45329b 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -31,7 +31,7 @@ int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data)
event.type = type;
event.data = data;
return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
- == NOTIFY_BAD) ? -EINVAL : 0;
+ == NOTIFY_BAD) ? -EINVAL : 0;
}
EXPORT_SYMBOL(acpi_notifier_call_chain);
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 43411a7457cd..e3638bafb941 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -134,7 +134,7 @@ int acpi_add_power_resource(acpi_handle handle);
void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
int acpi_device_sleep_wake(struct acpi_device *dev,
- int enable, int sleep_state, int dev_state);
+ int enable, int sleep_state, int dev_state);
int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 3a3c209ed3d3..442608220b5c 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -2175,10 +2175,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
* these commands.
*/
enum nfit_aux_cmds {
- NFIT_CMD_TRANSLATE_SPA = 5,
- NFIT_CMD_ARS_INJECT_SET = 7,
- NFIT_CMD_ARS_INJECT_CLEAR = 8,
- NFIT_CMD_ARS_INJECT_GET = 9,
+ NFIT_CMD_TRANSLATE_SPA = 5,
+ NFIT_CMD_ARS_INJECT_SET = 7,
+ NFIT_CMD_ARS_INJECT_CLEAR = 8,
+ NFIT_CMD_ARS_INJECT_GET = 9,
};
static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
@@ -2632,7 +2632,7 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
nfit_blk->bdw_offset = nfit_mem->bdw->offset;
mmio = &nfit_blk->mmio[BDW];
mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
- nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
+ nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
if (!mmio->addr.base) {
dev_dbg(dev, "%s failed to map bdw\n",
nvdimm_name(nvdimm));
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index dea8a60e18a4..14ee631cb7cf 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
* configure the IRQ assigned to this slot|dev|pin. The 'source_index'
* indicates which resource descriptor in the resource template (of
* the link device) this interrupt is allocated from.
- *
+ *
* NOTE: Don't query the Link Device for IRQ information at this time
* because Link Device enumeration may not have occurred yet
* (e.g. exists somewhere 'below' this _PRT entry in the ACPI
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 606da5d77ad3..fb4c5632a232 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -6,8 +6,8 @@
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@...el.com>
* Copyright (C) 2002 Dominik Brodowski <devel@...do.de>
*
- * TBD:
- * 1. Support more than one IRQ resource entry per link device (index).
+ * TBD:
+ * 1. Support more than one IRQ resource entry per link device (index).
* 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
* for IRQ management (e.g. start()->_SRS).
*/
@@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
}
}
- /*
- * Query and parse _CRS to get the current IRQ assignment.
+ /*
+ * Query and parse _CRS to get the current IRQ assignment.
*/
status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
@@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
/*
* "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
* Link Devices to move the PIRQs around to minimize sharing.
- *
+ *
* "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
* that the BIOS has already set to active. This is necessary because
* ACPI has no automatic means of knowing what ISA IRQs are used. Note that
@@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
*
* Note that PCI IRQ routers have a list of possible IRQs,
* which may not include the IRQs this table says are available.
- *
+ *
* Since this heuristic can't tell the difference between a link
* that no device will attach to, vs. a link which may be shared
* by multiple active devices -- it is not optimal.
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 7ddd57abadd1..95f23acd5b80 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -173,7 +173,7 @@ static int pci_mcfg_quirk_matches(struct mcfg_fixup *f, u16 segment,
{
if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
!memcmp(f->oem_table_id, mcfg_oem_table_id,
- ACPI_OEM_TABLE_ID_SIZE) &&
+ ACPI_OEM_TABLE_ID_SIZE) &&
f->oem_revision == mcfg_oem_revision &&
f->segment == segment &&
resource_contains(&f->bus_range, bus_range))
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 837b875d075e..8048da85b7e0 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -13,7 +13,7 @@
* 1. via "Device Specific (D-State) Control"
* 2. via "Power Resource Control".
* The code below deals with ACPI Power Resources control.
- *
+ *
* An ACPI "power resource object" represents a software controllable power
* plane, clock plane, or other resource depended on by a device.
*
@@ -645,7 +645,7 @@ int acpi_power_wakeup_list_init(struct list_head *list, int *system_level_p)
* -ENODEV if the execution of either _DSW or _PSW has failed
*/
int acpi_device_sleep_wake(struct acpi_device *dev,
- int enable, int sleep_state, int dev_state)
+ int enable, int sleep_state, int dev_state)
{
union acpi_object in_arg[3];
struct acpi_object_list arg_list = { 3, in_arg };
@@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
/*
* Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
- * 1. Power on the power resources required for the wakeup device
+ * 1. Power on the power resources required for the wakeup device
* 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
* State Wake) for the device, if present
*/
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 5909e8fa4013..b04a68950ff1 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -354,7 +354,7 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
(u32) px->control, (u32) px->status));
/*
- * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
*/
if (!px->core_frequency ||
((u32)(px->core_frequency * 1000) !=
@@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
goto err_ret;
/*
- * Now that we have _PSD data from all CPUs, lets setup P-state
+ * Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
for_each_possible_cpu(i) {
@@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
if (match_pdomain->domain != pdomain->domain)
continue;
- match_pr->performance->shared_type =
+ match_pr->performance->shared_type =
pr->performance->shared_type;
cpumask_copy(match_pr->performance->shared_cpu_map,
pr->performance->shared_cpu_map);
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index f158b8c30113..e6d9f4de2800 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -366,7 +366,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
state_readers[i].mode,
ACPI_SBS_BATTERY,
state_readers[i].command,
- (u8 *)battery +
+ (u8 *)battery +
state_readers[i].offset);
if (result)
goto end;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index 87b74e9015e5..53c2862c4c75 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -176,7 +176,7 @@ int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 address,
EXPORT_SYMBOL_GPL(acpi_smbus_write);
int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
- smbus_alarm_callback callback, void *context)
+ smbus_alarm_callback callback, void *context)
{
mutex_lock(&hc->lock);
hc->callback = callback;
diff --git a/drivers/acpi/sbshc.h b/drivers/acpi/sbshc.h
index c3522bb82792..695c390e2884 100644
--- a/drivers/acpi/sbshc.h
+++ b/drivers/acpi/sbshc.h
@@ -24,9 +24,9 @@ enum acpi_sbs_device_addr {
typedef void (*smbus_alarm_callback)(void *context);
extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
- u8 command, u8 * data);
+ u8 command, u8 *data);
extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
- u8 command, u8 * data, u8 length);
+ u8 command, u8 *data, u8 length);
extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
- smbus_alarm_callback callback, void *context);
+ smbus_alarm_callback callback, void *context);
extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 3a032afd9d05..4f5463b2a217 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -178,14 +178,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
},
},
- {
- .callback = video_detect_force_video,
- .ident = "ThinkPad X201T",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
- },
- },
+ {
+ .callback = video_detect_force_video,
+ .ident = "ThinkPad X201T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
+ },
+ },
/* The native backlight controls do not work on some older machines */
{
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index f89dd9a99e6e..b02bf770aead 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -44,7 +44,7 @@ void acpi_enable_wakeup_devices(u8 sleep_state)
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
- || dev->wakeup.prepare_count))
+ || dev->wakeup.prepare_count))
continue;
if (device_may_wakeup(&dev->dev))
@@ -69,7 +69,7 @@ void acpi_disable_wakeup_devices(u8 sleep_state)
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
- || dev->wakeup.prepare_count))
+ || dev->wakeup.prepare_count))
continue;
acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
--
2.29.2
Powered by blists - more mailing lists