[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201105120331.9853-4-chin-ting_kuo@aspeedtech.com>
Date: Thu, 5 Nov 2020 20:03:30 +0800
From: Chin-Ting Kuo <chin-ting_kuo@...eedtech.com>
To: <broonie@...nel.org>, <robh+dt@...nel.org>, <joel@....id.au>,
<andrew@...id.au>, <clg@...d.org>, <bbrezillon@...nel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-aspeed@...ts.ozlabs.org>, <linux-spi@...r.kernel.org>
CC: <BMC-SW@...eedtech.com>
Subject: [v3 3/4] ARM: dts: aspeed: ast2600-evb: Adjust SPI flash configuration
- Enable FMC CS1 and SPI2 CS0 SPI NOR flashes since both of
these two flashes are mounted on AST2600 EVB by default.
- Remove spi-max-frequency setting: 50MHz is usual SPI bus
frequency adopted on AST2600 EVB which has already been
configured in aspeed-g6.dtsi.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@...eedtech.com>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 26 ++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 8d0f4656aa05..5a2e4612d155 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -96,12 +96,11 @@
&fmc {
status = "okay";
+
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
- spi-max-frequency = <50000000>;
-
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -133,18 +132,37 @@
};
};
};
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "fmc0:1";
+ };
};
&spi1 {
status = "okay";
+
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
+ label = "spi1:0";
+ };
+};
+
+&spi2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi2:0";
};
};
--
2.17.1
Powered by blists - more mailing lists