[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201105144945.484592-4-matteo.scordino@gmail.com>
Date: Thu, 5 Nov 2020 14:49:45 +0000
From: Matteo Scordino <matteo.scordino@...il.com>
To: mripard@...nel.org, wens@...e.org, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
Matteo Scordino <matteo.scordino@...il.com>
Subject: [PATCH v3 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@...il.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 34 ++++++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4f0adfead547..50e438ab8a00 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1208,6 +1208,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..2119403fb65e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@...mo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+ model = "Elimo Initium";
+ compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+ "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ status = "okay";
+};
--
2.20.1
Powered by blists - more mailing lists