[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201106001444.667232-2-sean.v.kelley@intel.com>
Date: Thu, 5 Nov 2020 16:14:29 -0800
From: Sean V Kelley <sean.v.kelley@...el.com>
To: bhelgaas@...gle.com, Jonathan.Cameron@...wei.com,
xerces.zhao@...il.com, rafael.j.wysocki@...el.com,
ashok.raj@...el.com, tony.luck@...el.com,
sathyanarayanan.kuppuswamy@...el.com, qiuxu.zhuo@...el.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
Sean V Kelley <sean.v.kelley@...el.com>
Subject: [PATCH v10 01/16] AER: aer_root_reset() non-native handling
If an OS has not been granted AER control via _OSC, then
the OS should not make changes to PCI_ERR_ROOT_COMMAND and
PCI_ERR_ROOT_STATUS related registers. Per section 4.5.1 of
the System Firmware Intermediary (SFI) _OSC and DPC Updates
ECN [1], this bit also covers these aspects of the PCI
Express Advanced Error Reporting. Based on the above and
earlier discussion [2], make the following changes:
Add a check for the native case (i.e., AER control via _OSC)
Note that the current "clear, reset, enable" order suggests that the
reset might cause errors that we should ignore. Lacking historical
context, these will be retained.
[1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24,
2020, affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/14076
[2] https://lore.kernel.org/linux-pci/20201020162820.GA370938@bjorn-Precision-5520/
Signed-off-by: Sean V Kelley <sean.v.kelley@...el.com>
---
drivers/pci/pcie/aer.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 65dff5f3457a..4ab379fa1506 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1358,26 +1358,29 @@ static int aer_probe(struct pcie_device *dev)
static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
{
int aer = dev->aer_cap;
+ int rc = 0;
u32 reg32;
- int rc;
-
- /* Disable Root's interrupt in response to error messages */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ if (pcie_aer_is_native(dev)) {
+ /* Disable Root's interrupt in response to error messages */
+ pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
+ pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ }
rc = pci_bus_error_reset(dev);
- pci_info(dev, "Root Port link has been reset\n");
+ pci_info(dev, "Root Port link has been reset (%d)\n", rc);
- /* Clear Root Error Status */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, ®32);
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
+ if (pcie_aer_is_native(dev)) {
+ /* Clear Root Error Status */
+ pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, ®32);
+ pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
- /* Enable Root Port's interrupt in response to error messages */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ /* Enable Root Port's interrupt in response to error messages */
+ pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
+ pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ }
return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
}
--
2.29.2
Powered by blists - more mailing lists