[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201106232908.364581-5-ira.weiny@intel.com>
Date: Fri, 6 Nov 2020 15:29:02 -0800
From: ira.weiny@...el.com
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
Andy Lutomirski <luto@...nel.org>,
Peter Zijlstra <peterz@...radead.org>,
Dave Hansen <dave.hansen@...ux.intel.com>
Cc: Ira Weiny <ira.weiny@...el.com>, Fenghua Yu <fenghua.yu@...el.com>,
x86@...nel.org, linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
linux-doc@...r.kernel.org, linux-nvdimm@...ts.01.org,
linux-mm@...ck.org, linux-kselftest@...r.kernel.org,
Dan Williams <dan.j.williams@...el.com>,
Greg KH <gregkh@...uxfoundation.org>
Subject: [PATCH V3 04/10] x86/pks: Preserve the PKRS MSR on context switch
From: Ira Weiny <ira.weiny@...el.com>
The PKRS MSR is defined as a per-logical-processor register. This
isolates memory access by logical CPU. Unfortunately, the MSR is not
managed by XSAVE. Therefore, tasks must save/restore the MSR value on
context switch.
Define a saved PKRS value in the task struct, as well as a cached
per-logical-processor MSR value which mirrors the MSR value of the
current CPU. Initialize all tasks with the default MSR value. Then, on
schedule in, check the saved task MSR vs the per-cpu value. If
different proceed to write the MSR. If not avoid the overhead of the
MSR write and continue.
Follow on patches will update the saved PKRS as well as the MSR if
needed.
Finally it should be noted that the underlying WRMSR(MSR_IA32_PKRS) is
not serializing but still maintains ordering properties similar to
WRPKRU. The current SDM section on PKRS needs updating but should be
the same as that of WRPKRU. So to quote from the WRPKRU text:
WRPKRU will never execute transiently. Memory accesses affected
by PKRU register will not execute (even transiently) until all
prior executions of WRPKRU have completed execution and updated
the PKRU register.
Co-developed-by: Fenghua Yu <fenghua.yu@...el.com>
Signed-off-by: Fenghua Yu <fenghua.yu@...el.com>
Co-developed-by: Peter Zijlstra <peterz@...radead.org>
Signed-off-by: Peter Zijlstra <peterz@...radead.org>
Signed-off-by: Ira Weiny <ira.weiny@...el.com>
---
Changes from V2
Adjust for PKS enable being final patch.
Changes from V1
Rebase to latest tip/master
Resolve conflicts with INIT_THREAD changes
Changes since RFC V3
Per Dave Hansen
Update commit message
move saved_pkrs to be in a nicer place
Per Peter Zijlstra
Add Comment from Peter
Clean up white space
Update authorship
---
arch/x86/include/asm/msr-index.h | 1 +
arch/x86/include/asm/pkeys_common.h | 20 +++++++++++++++++++
arch/x86/include/asm/processor.h | 18 ++++++++++++++++-
arch/x86/kernel/process.c | 26 ++++++++++++++++++++++++
arch/x86/mm/pkeys.c | 31 +++++++++++++++++++++++++++++
5 files changed, 95 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 972a34d93505..ddb125e44408 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -754,6 +754,7 @@
#define MSR_IA32_TSC_DEADLINE 0x000006E0
+#define MSR_IA32_PKRS 0x000006E1
#define MSR_TSX_FORCE_ABORT 0x0000010F
diff --git a/arch/x86/include/asm/pkeys_common.h b/arch/x86/include/asm/pkeys_common.h
index 737d916f476c..801a75615209 100644
--- a/arch/x86/include/asm/pkeys_common.h
+++ b/arch/x86/include/asm/pkeys_common.h
@@ -12,4 +12,24 @@
*/
#define PKR_AD_KEY(pkey) (PKR_AD_BIT << ((pkey) * PKR_BITS_PER_PKEY))
+/*
+ * Define a default PKRS value for each task.
+ *
+ * Key 0 has no restriction. All other keys are set to the most restrictive
+ * value which is access disabled (AD=1).
+ *
+ * NOTE: This needs to be a macro to be used as part of the INIT_THREAD macro.
+ */
+#define INIT_PKRS_VALUE (PKR_AD_KEY(1) | PKR_AD_KEY(2) | PKR_AD_KEY(3) | \
+ PKR_AD_KEY(4) | PKR_AD_KEY(5) | PKR_AD_KEY(6) | \
+ PKR_AD_KEY(7) | PKR_AD_KEY(8) | PKR_AD_KEY(9) | \
+ PKR_AD_KEY(10) | PKR_AD_KEY(11) | PKR_AD_KEY(12) | \
+ PKR_AD_KEY(13) | PKR_AD_KEY(14) | PKR_AD_KEY(15))
+
+#ifdef CONFIG_ARCH_HAS_SUPERVISOR_PKEYS
+void write_pkrs(u32 new_pkrs);
+#else
+static inline void write_pkrs(u32 new_pkrs) { }
+#endif
+
#endif /*_ASM_X86_PKEYS_INTERNAL_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 82a08b585818..e9c65368b0b2 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -18,6 +18,7 @@ struct vm86;
#include <asm/cpufeatures.h>
#include <asm/page.h>
#include <asm/pgtable_types.h>
+#include <asm/pkeys_common.h>
#include <asm/percpu.h>
#include <asm/msr.h>
#include <asm/desc_defs.h>
@@ -520,6 +521,12 @@ struct thread_struct {
unsigned long cr2;
unsigned long trap_nr;
unsigned long error_code;
+
+#ifdef CONFIG_ARCH_HAS_SUPERVISOR_PKEYS
+ /* Saved Protection key register for supervisor mappings */
+ u32 saved_pkrs;
+#endif
+
#ifdef CONFIG_VM86
/* Virtual 86 mode info */
struct vm86 *vm86;
@@ -785,7 +792,16 @@ static inline void spin_lock_prefetch(const void *x)
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#else
-#define INIT_THREAD { }
+
+#ifdef CONFIG_ARCH_HAS_SUPERVISOR_PKEYS
+#define INIT_THREAD_PKRS .saved_pkrs = INIT_PKRS_VALUE
+#else
+#define INIT_THREAD_PKRS 0
+#endif
+
+#define INIT_THREAD { \
+ INIT_THREAD_PKRS, \
+}
extern unsigned long KSTK_ESP(struct task_struct *task);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ba4593a913fa..aa2ae5292ff1 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -43,6 +43,7 @@
#include <asm/io_bitmap.h>
#include <asm/proto.h>
#include <asm/frame.h>
+#include <asm/pkeys_common.h>
#include "process.h"
@@ -187,6 +188,27 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
return ret;
}
+#ifdef CONFIG_ARCH_HAS_SUPERVISOR_PKEYS
+DECLARE_PER_CPU(u32, pkrs_cache);
+static inline void pks_init_task(struct task_struct *tsk)
+{
+ /* New tasks get the most restrictive PKRS value */
+ tsk->thread.saved_pkrs = INIT_PKRS_VALUE;
+}
+static inline void pks_sched_in(void)
+{
+ /*
+ * PKRS is only temporarily changed during specific code paths. Only a
+ * preemption during these windows away from the default value would
+ * require updating the MSR. write_pkrs() handles this optimization.
+ */
+ write_pkrs(current->thread.saved_pkrs);
+}
+#else
+static inline void pks_init_task(struct task_struct *tsk) { }
+static inline void pks_sched_in(void) { }
+#endif
+
void flush_thread(void)
{
struct task_struct *tsk = current;
@@ -195,6 +217,8 @@ void flush_thread(void)
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
fpu__clear_all(&tsk->thread.fpu);
+
+ pks_init_task(tsk);
}
void disable_TSC(void)
@@ -644,6 +668,8 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
if ((tifp ^ tifn) & _TIF_SLD)
switch_to_sld(tifn);
+
+ pks_sched_in();
}
/*
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index d1dfe743e79f..76a62419c446 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -231,3 +231,34 @@ u32 update_pkey_val(u32 pk_reg, int pkey, unsigned int flags)
return pk_reg;
}
+
+DEFINE_PER_CPU(u32, pkrs_cache);
+
+/**
+ * write_pkrs() optimizes MSR writes by maintaining a per cpu cache which can
+ * be checked quickly.
+ *
+ * It should also be noted that the underlying WRMSR(MSR_IA32_PKRS) is not
+ * serializing but still maintains ordering properties similar to WRPKRU.
+ * The current SDM section on PKRS needs updating but should be the same as
+ * that of WRPKRU. So to quote from the WRPKRU text:
+ *
+ * WRPKRU will never execute transiently. Memory accesses
+ * affected by PKRU register will not execute (even transiently)
+ * until all prior executions of WRPKRU have completed execution
+ * and updated the PKRU register.
+ */
+void write_pkrs(u32 new_pkrs)
+{
+ u32 *pkrs;
+
+ if (!static_cpu_has(X86_FEATURE_PKS))
+ return;
+
+ pkrs = get_cpu_ptr(&pkrs_cache);
+ if (*pkrs != new_pkrs) {
+ *pkrs = new_pkrs;
+ wrmsrl(MSR_IA32_PKRS, new_pkrs);
+ }
+ put_cpu_ptr(pkrs);
+}
--
2.28.0.rc0.12.gb6a658bd00c9
Powered by blists - more mailing lists