linux-kernel - [PATCH v2 3/3] Input: goodix - add option to disable firmware loading

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201106100539.6646-4-andrej.valek@siemens.com>
Date:   Fri,  6 Nov 2020 11:05:39 +0100
From:   Andrej Valek <andrej.valek@...mens.com>
To:     robh@...nel.org, nick@...anahar.org, hadess@...ess.net,
        dmitry.torokhov@...il.com
Cc:     linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Andrej Valek <andrej.valek@...mens.com>
Subject: [PATCH v2 3/3] Input: goodix - add option to disable firmware loading

Firmware file loadind for GT911 controller takes too much time (~60s).
There is no check that configuration is the same which is already present.
This happens always during boot, which makes touchscreen unusable.

Add there an option to prevent firmware file loading, but keep it enabled
by default.

Signed-off-by: Andrej Valek <andrej.valek@...mens.com>
---
 drivers/input/touchscreen/goodix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 44336ecd2acd..41f8eb8963b1 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -943,7 +943,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 			ts->reset_controller_at_probe = true;
 			/* Prevent cfg loading for each start */
 			ts->load_cfg_from_disk = !device_property_read_bool(dev,
-						 "touchscreen-do-not-load-fw");
+						 "goodix-do-not-load-fw");
 			ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO;
 		}
 	}
-- 
2.20.1