lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201106105627.31061-4-qiangqing.zhang@nxp.com>
Date:   Fri,  6 Nov 2020 18:56:25 +0800
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     mkl@...gutronix.de, robh+dt@...nel.org, shawnguo@...nel.org,
        s.hauer@...gutronix.de
Cc:     kernel@...gutronix.de, linux-imx@....com,
        linux-can@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH V5 3/5] can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR

This patch intends to rename FLEXCAN_QUIRK_SETUP_STOP_MODE quirk
to FLEXCAN_QUIRK_SETUP_STOP_MODE_GRP for non-scu SoCs, coming patch will
add quirk for scu SoCs.

For non-scu SoCs, setup stop mode with GPR register.
For scu SoCs, setup stop mode with SCU firmware.

Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
 drivers/net/can/flexcan.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 881799bd9c5e..8f578c867493 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -236,8 +236,8 @@
 #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
 /* default to BE register access */
 #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7)
-/* Setup stop mode to support wakeup */
-#define FLEXCAN_QUIRK_SETUP_STOP_MODE BIT(8)
+/* Setup stop mode with GPR to support wakeup */
+#define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8)
 /* Support CAN-FD mode */
 #define FLEXCAN_QUIRK_SUPPORT_FD BIT(9)
 /* support memory detection and correction */
@@ -381,7 +381,7 @@ static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
 static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_SETUP_STOP_MODE,
+		FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
 };
 
 static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
@@ -393,7 +393,7 @@ static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
 static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE |
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
 		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
 };
 
@@ -2043,7 +2043,7 @@ static int flexcan_probe(struct platform_device *pdev)
 	of_can_transceiver(dev);
 	devm_can_led_init(dev);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE) {
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) {
 		err = flexcan_setup_stop_mode(pdev);
 		if (err)
 			dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ