[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAMpxmJVUkXxDkPDKQr98H0uCWJF9zKKzpe9np3McmT3MmeLJ3A@mail.gmail.com>
Date: Fri, 6 Nov 2020 15:31:48 +0100
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
To: Dmitry Osipenko <digetx@...il.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Laxman Dewangan <ldewangan@...dia.com>,
Linus Walleij <linus.walleij@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Peter Geis <pgwipeout@...il.com>, linux-tegra@...r.kernel.org,
linux-gpio <linux-gpio@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] gpio: tegra: Use raw_spinlock
On Wed, Nov 4, 2020 at 6:04 PM Dmitry Osipenko <digetx@...il.com> wrote:
>
> Use raw_spinlock in order to fix spurious messages about invalid context
> when spinlock debugging is enabled. This happens because there is a legit
> nested raw_spinlock->spinlock locking usage within IRQ-related code. IRQ
> core uses raw spinlock and then Tegra GPIO driver uses a nested spinlock.
> The debug code can't recognize and handle this case, hence we need to use
> raw spinlock in the GPIO driver.
>
> [ BUG: Invalid wait context ]
> ...
> (dump_stack) from (__lock_acquire)
> (__lock_acquire) from (lock_acquire)
> (lock_acquire) from (_raw_spin_lock_irqsave)
> (_raw_spin_lock_irqsave) from (tegra_gpio_irq_set_type)
> (tegra_gpio_irq_set_type) from (__irq_set_trigger)
> (__irq_set_trigger) from (__setup_irq)
> (__setup_irq) from (request_threaded_irq)
> (request_threaded_irq) from (devm_request_threaded_irq)
> (devm_request_threaded_irq) from (elants_i2c_probe)
> (elants_i2c_probe) from (i2c_device_probe)
> ...
>
> Tested-by: Peter Geis <pgwipeout@...il.com>
> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> ---
>
> Changelog:
>
> v2: - Only lvl_lock is converted to raw_spinlock. The dbc_lock doesn't
> relate to IRQ and doesn't need the conversion.
>
> - Improved commit message by clarifying that IRQ core uses raw
> spinlock.
>
> - Added clarifying comment to the code for the lvl_lock.
>
> drivers/gpio/gpio-tegra.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
> index 98fc78739ebf..e19ebff6018c 100644
> --- a/drivers/gpio/gpio-tegra.c
> +++ b/drivers/gpio/gpio-tegra.c
> @@ -61,8 +61,16 @@ struct tegra_gpio_info;
> struct tegra_gpio_bank {
> unsigned int bank;
> unsigned int irq;
> - spinlock_t lvl_lock[4];
> - spinlock_t dbc_lock[4]; /* Lock for updating debounce count register */
> +
> + /*
> + * IRQ-core code uses raw locking, and thus, nested locking also
> + * should be raw in order not to trip spinlock debug warnings.
> + */
> + raw_spinlock_t lvl_lock[4];
> +
> + /* Lock for updating debounce count register */
> + spinlock_t dbc_lock[4];
> +
> #ifdef CONFIG_PM_SLEEP
> u32 cnf[4];
> u32 out[4];
> @@ -334,14 +342,14 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
> return -EINVAL;
> }
>
> - spin_lock_irqsave(&bank->lvl_lock[port], flags);
> + raw_spin_lock_irqsave(&bank->lvl_lock[port], flags);
>
> val = tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio));
> val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
> val |= lvl_type << GPIO_BIT(gpio);
> tegra_gpio_writel(tgi, val, GPIO_INT_LVL(tgi, gpio));
>
> - spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
> + raw_spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
>
> tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, gpio), gpio, 0);
> tegra_gpio_enable(tgi, gpio);
> @@ -675,7 +683,7 @@ static int tegra_gpio_probe(struct platform_device *pdev)
> tegra_gpio_irq_handler, bank);
>
> for (j = 0; j < 4; j++) {
> - spin_lock_init(&bank->lvl_lock[j]);
> + raw_spin_lock_init(&bank->lvl_lock[j]);
> spin_lock_init(&bank->dbc_lock[j]);
> }
> }
> --
> 2.27.0
>
Patch applied, thanks!
Bartosz
Powered by blists - more mailing lists