Message-ID: <20201107030702.GE3025@boqun-archlinux>
Date:   Sat, 7 Nov 2020 11:07:02 +0800
From:   Boqun Feng <boqun.feng@...il.com>
To:     "Paul E. McKenney" <paulmck@...nel.org>
Cc:     linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org,
        kernel-team@...com, mingo@...nel.org, stern@...land.harvard.edu,
        parri.andrea@...il.com, will@...nel.org, peterz@...radead.org,
        npiggin@...il.com, dhowells@...hat.com, j.alglave@....ac.uk,
        luc.maranget@...ia.fr, akiyks@...il.com
Subject: Re: [PATCH memory-model 5/8] tools/memory-model: Add a glossary of
 LKMM terms

On Fri, Nov 06, 2020 at 10:01:02AM -0800, Paul E. McKenney wrote:
> On Fri, Nov 06, 2020 at 09:47:22AM +0800, Boqun Feng wrote:
> > On Thu, Nov 05, 2020 at 02:00:14PM -0800, paulmck@...nel.org wrote:
> > > From: "Paul E. McKenney" <paulmck@...nel.org>
> > > 
> > > Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
> > > ---
> > >  tools/memory-model/Documentation/glossary.txt | 155 ++++++++++++++++++++++++++
> > >  1 file changed, 155 insertions(+)
> > >  create mode 100644 tools/memory-model/Documentation/glossary.txt
> > > 
> > > diff --git a/tools/memory-model/Documentation/glossary.txt b/tools/memory-model/Documentation/glossary.txt
> > > new file mode 100644
> > > index 0000000..036fa28
> > > --- /dev/null
> > > +++ b/tools/memory-model/Documentation/glossary.txt
> > > @@ -0,0 +1,155 @@
> > > +This document contains brief definitions of LKMM-related terms.  Like most
> > > +glossaries, it is not intended to be read front to back (except perhaps
> > > +as a way of confirming a diagnosis of OCD), but rather to be searched
> > > +for specific terms.
> > > +
> > > +
> > > +Address Dependency:  When the address of a later memory access is computed
> > > +	based on the value returned by an earlier load, an "address
> > > +	dependency" extends from that load extending to the later access.
> > > +	Address dependencies are quite common in RCU read-side critical
> > > +	sections:
> > > +
> > > +	 1 rcu_read_lock();
> > > +	 2 p = rcu_dereference(gp);
> > > +	 3 do_something(p->a);
> > > +	 4 rcu_read_unlock();
> > > +
> > > +	 In this case, because the address of "p->a" on line 3 is computed
> > > +	 from the value returned by the rcu_dereference() on line 2, the
> > > +	 address dependency extends from that rcu_dereference() to that
> > > +	 "p->a".  In rare cases, optimizing compilers can destroy address
> > > +	 dependencies.	Please see Documentation/RCU/rcu_dereference.txt
> > > +	 for more information.
> > > +
> > > +	 See also "Control Dependency".
> > > +
> > > +Acquire:  With respect to a lock, acquiring that lock, for example,
> > > +	using spin_lock().  With respect to a non-lock shared variable,
> > > +	a special operation that includes a load and which orders that
> > > +	load before later memory references running on that same CPU.
> > > +	An example special acquire operation is smp_load_acquire(),
> > > +	but atomic_read_acquire() and atomic_xchg_acquire() also include
> > > +	acquire loads.
> > > +
> > > +	When an acquire load returns the value stored by a release store
> > > +	to that same variable, then all operations preceding that store
> > 
> > Change this to:
> > 
> > 	When an acquire load reads-from a release store
> > 
> > , and put a reference to "Reads-from"? I think this makes the document
> > more consistent in that it makes clear "an acquire load returns the
> > value stored by a release store to the same variable" is not a special
> > case, it's simple a "Reads-from".
> > 
> > > +	happen before any operations following that load acquire.
> > 
> > Add a reference to the definition of "happen before" in explanation.txt?
> 
> How about as shown below?  I currently am carrying this as a separate
> commit, but I might merge it into this one later on.
> 

Looks good to me, thanks!

Regards,
Boqun

> 							Thanx, Paul
> 
> ------------------------------------------------------------------------
> 
> commit 774a52cd3d80d6b657ae6c14c10bd9fc437068f3
> Author: Paul E. McKenney <paulmck@...nel.org>
> Date:   Fri Nov 6 09:58:01 2020 -0800
> 
>     tools/memory-model: Tie acquire loads to reads-from
>     
>     This commit explicitly makes the connection between acquire loads and
>     the reads-from relation.  It also adds an entry for happens-before,
>     and refers to the corresponding section of explanation.txt.
>     
>     Reported-by: Boqun Feng <boqun.feng@...il.com>
>     Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
> 
> diff --git a/tools/memory-model/Documentation/glossary.txt b/tools/memory-model/Documentation/glossary.txt
> index 3924aca..383151b 100644
> --- a/tools/memory-model/Documentation/glossary.txt
> +++ b/tools/memory-model/Documentation/glossary.txt
> @@ -33,10 +33,11 @@ Acquire:  With respect to a lock, acquiring that lock, for example,
>  	acquire loads.
>  
>  	When an acquire load returns the value stored by a release store
> -	to that same variable, then all operations preceding that store
> -	happen before any operations following that load acquire.
> +	to that same variable, (in other words, the acquire load "reads
> +	from" the release store), then all operations preceding that
> +	store "happen before" any operations following that load acquire.
>  
> -	See also "Relaxed" and "Release".
> +	See also "Happens-Before", "Reads-From", "Relaxed", and "Release".
>  
>  Coherence (co):  When one CPU's store to a given variable overwrites
>  	either the value from another CPU's store or some later value,
> @@ -102,6 +103,11 @@ Fully Ordered:  An operation such as smp_mb() that orders all of
>  	that orders all of its CPU's prior accesses, itself, and
>  	all of its CPU's subsequent accesses.
>  
> +Happens-Before (hb): A relation between two accesses in which LKMM
> +	guarantees the first access precedes the second.  For more
> +	detail, please see the "THE HAPPENS-BEFORE RELATION: hb"
> +	section of explanation.txt.
> +
>  Marked Access:  An access to a variable that uses an special function or
>  	macro such as "r1 = READ_ONCE()" or "smp_store_release(&a, 1)".
>  

Powered by blists - more mailing lists