linux-kernel - [PATCH v3 8/9] arm64: dts: ls1028a: fix FlexSPI clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201108185113.31377-9-michael@walle.cc>
Date:   Sun,  8 Nov 2020 19:51:12 +0100
From:   Michael Walle <michael@...le.cc>
To:     linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        "Y . b . Lu" <yangbo.lu@....com>,
        Xiaowei Bao <xiaowei.bao@....com>,
        Ashish Kumar <Ashish.Kumar@....com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Michael Walle <michael@...le.cc>
Subject: [PATCH v3 8/9] arm64: dts: ls1028a: fix FlexSPI clock

Now that we have a proper driver for the FlexSPI interface use it. This
will fix SCK frequency switching on Layerscape SoCs.

This was tested on the Kontron sl28 board.

Signed-off-by: Michael Walle <michael@...le.cc>
---
Changes since v2:
 - use device tree constants for clockgen
 - also use &fspi_clk for fspi_en clock

Changes since v1:
 - none

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 055da2c710c3..8f2f2e2ab87d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -207,9 +207,20 @@
 		};
 
 		dcfg: syscon@...0000 {
-			compatible = "fsl,ls1028a-dcfg", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
+			ranges = <0x0 0x0 0x1e00000 0x10000>;
 			little-endian;
+
+			fspi_clk: clock-controller@900 {
+				compatible = "fsl,ls1028a-flexspi-clk";
+				reg = <0x900 0x4>;
+				#clock-cells = <0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+				clock-output-names = "fspi_clk";
+			};
 		};
 
 		rst: syscon@...0000 {
@@ -327,8 +338,7 @@
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "fspi_base", "fspi_mmap";
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen QORIQ_CLK_HWACCEL 0>,
-				 <&clockgen QORIQ_CLK_HWACCEL 0>;
+			clocks = <&fspi_clk>, <&fspi_clk>;
 			clock-names = "fspi_en", "fspi";
 			status = "disabled";
 		};
-- 
2.20.1