linux-kernel - [PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 9 Nov 2020 22:34:09 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Tero Kristo <t-kristo@...com>, Nishanth Menon <nm@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Roger Quadros <rogerq@...com>, Lee Jones <lee.jones@...aro.org>
CC:     Kishon Vijay Abraham I <kishon@...com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
        <linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

x2 lane PCIe slot in the common processor board is enabled and connected to
j7200 SOM. Add PCIe DT node in common processor board to reflect the
same.

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts    | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 65a2e5aeb050..174a55a18522 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/phy/phy.h>
@@ -236,3 +237,17 @@
 		resets = <&serdes_wiz0 3>;
 	};
 };
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
-- 
2.17.1