linux-kernel - [PATCH 6/9] arm64: dts: rockchip: px30-engicam: Add BT support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201109181017.206834-7-jagan@amarulasolutions.com>
Date:   Mon,  9 Nov 2020 23:40:14 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh+dt@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>
Cc:     Suniel Mahesh <sunil@...rulasolutions.com>,
        Michael Trimarchi <michael@...rulasolutions.com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        linux-amarula <linux-amarula@...rulasolutions.com>,
        Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 6/9] arm64: dts: rockchip: px30-engicam: Add BT support

From: Suniel Mahesh <sunil@...rulasolutions.com>

Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the UART bus.

UART bus on the design routed via USB to UART CP20x bridge. This
bridge powered from 3V3 regualtor gpio.

This patch adds BT enablement nodes for these respective boards.

Signed-off-by: Michael Trimarchi <michael@...rulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@...rulasolutions.com>
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
 .../arm64/boot/dts/rockchip/px30-engicam-common.dtsi | 12 ++++++++++++
 .../boot/dts/rockchip/px30-engicam-ctouch2.dtsi      | 10 ++++++++++
 .../dts/rockchip/px30-engicam-px30-core-edimm2.2.dts | 10 ++++++++++
 3 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 92681ccf50f1..eb2be7893863 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -40,6 +40,18 @@ sdio_pwrseq: sdio-pwrseq {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_enable_h>;
 	};
+
+	vcc3v3_btreg: vcc3v3-btreg {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_h>;
+		regulator-name = "btreg-gpio-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		states = <3300000 0x0>;
+	};
 };
 
 &sdio {
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
index d5708779c285..bf10a3d29fca 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -8,6 +8,12 @@
 #include "px30-engicam-common.dtsi"
 
 &pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -18,3 +24,7 @@ wifi_enable_h: wifi-enable-h {
 &sdio_pwrseq {
 	reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 };
+
+&vcc3v3_btreg {
+	enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
index 913444548b59..d759478e1c84 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -21,6 +21,12 @@ chosen {
 };
 
 &pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -31,3 +37,7 @@ wifi_enable_h: wifi-enable-h {
 &sdio_pwrseq {
 	reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
 };
+
+&vcc3v3_btreg {
+	enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
-- 
2.25.1