lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201109132130.34555-1-f.suligoi@asem.it>
Date:   Mon, 9 Nov 2020 14:21:30 +0100
From:   Flavio Suligoi <f.suligoi@...m.it>
To:     Vineet Gupta <vgupta@...opsys.com>
CC:     <linux-snps-arc@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, Flavio Suligoi <f.suligoi@...m.it>
Subject: [PATCH] ARC: mm: fix spelling mistakes

Signed-off-by: Flavio Suligoi <f.suligoi@...m.it>
---
 arch/arc/mm/tlb.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index c340acd989a0..9bb3c24f3677 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -30,14 +30,14 @@
  *  -Changes related to MMU v2 (Rel 4.8)
  *
  * Vineetg: Aug 29th 2008
- *  -In TLB Flush operations (Metal Fix MMU) there is a explict command to
+ *  -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
  *    flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
  *    it fails. Thus need to load it with ANY valid value before invoking
  *    TLBIVUTLB cmd
  *
  * Vineetg: Aug 21th 2008:
  *  -Reduced the duration of IRQ lockouts in TLB Flush routines
- *  -Multiple copies of TLB erase code seperated into a "single" function
+ *  -Multiple copies of TLB erase code separated into a "single" function
  *  -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
  *       in interrupt-safe region.
  *
@@ -66,7 +66,7 @@
  *
  * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
  * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrasing problem should never happen because once the 3
+ * Given this, the thrashing problem should never happen because once the 3
  * J-TLB entries are created (even though 3rd will knock out one of the prev
  * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
  *
@@ -127,7 +127,7 @@ static void utlb_invalidate(void)
 	 * There was however an obscure hardware bug, where uTLB flush would
 	 * fail when a prior probe for J-TLB (both totally unrelated) would
 	 * return lkup err - because the entry didn't exist in MMU.
-	 * The Workround was to set Index reg with some valid value, prior to
+	 * The Workaround was to set Index reg with some valid value, prior to
 	 * flush. This was fixed in MMU v3
 	 */
 	unsigned int idx;
@@ -272,7 +272,7 @@ noinline void local_flush_tlb_all(void)
 }
 
 /*
- * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
  */
 noinline void local_flush_tlb_mm(struct mm_struct *mm)
 {
@@ -303,7 +303,7 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm)
  * Difference between this and Kernel Range Flush is
  *  -Here the fastest way (if range is too large) is to move to next ASID
  *      without doing any explicit Shootdown
- *  -In case of kernel Flush, entry has to be shot down explictly
+ *  -In case of kernel Flush, entry has to be shot down explicitly
  */
 void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			   unsigned long end)
@@ -620,7 +620,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
  * Super Page size is configurable in hardware (4K to 16M), but fixed once
  * RTL builds.
  *
- * The exact THP size a Linx configuration will support is a function of:
+ * The exact THP size a Linux configuration will support is a function of:
  *  - MMU page size (typical 8K, RTL fixed)
  *  - software page walker address split between PGD:PTE:PFN (typical
  *    11:8:13, but can be changed with 1 line)
@@ -698,7 +698,7 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 #endif
 
-/* Read the Cache Build Confuration Registers, Decode them and save into
+/* Read the Cache Build Configuration Registers, Decode them and save into
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
@@ -803,13 +803,13 @@ void arc_mmu_init(void)
 	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
 
 	/*
-	 * Can't be done in processor.h due to header include depenedencies
+	 * Can't be done in processor.h due to header include dependencies
 	 */
 	BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
 
 	/*
 	 * stack top size sanity check,
-	 * Can't be done in processor.h due to header include depenedencies
+	 * Can't be done in processor.h due to header include dependencies
 	 */
 	BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
 
@@ -881,7 +881,7 @@ void arc_mmu_init(void)
  *      the duplicate one.
  * -Knob to be verbose abt it.(TODO: hook them up to debugfs)
  */
-volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
 
 void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
@@ -948,7 +948,7 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 
 /***********************************************************************
  * Diagnostic Routines
- *  -Called from Low Level TLB Hanlders if things don;t look good
+ *  -Called from Low Level TLB Handlers if things don;t look good
  **********************************************************************/
 
 #ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ