| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201110072446.8218-1-rentao.bupt@gmail.com>
Date: Mon, 9 Nov 2020 23:24:46 -0800
From: rentao.bupt@...il.com
To: Rob Herring <robh+dt@...nel.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, taoren@...com
Cc: Tao Ren <rentao.bupt@...il.com>
Subject: [PATCH] ARM: dts: aspeed: minipack: Fixup I2C tree
From: Tao Ren <rentao.bupt@...il.com>
Create all the i2c switches in device tree and use aliases to assign
child channels with consistent bus numbers.
Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to
avoid potential conflicts when multiple devices (beind the switches) use
the same device address.
Signed-off-by: Tao Ren <rentao.bupt@...il.com>
---
.../boot/dts/aspeed-bmc-facebook-minipack.dts | 888 ++++++++++++++++++
1 file changed, 888 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
index c34741dbd268..9eb23e874f19 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -70,6 +70,162 @@
i2c45 = &imux45;
i2c46 = &imux46;
i2c47 = &imux47;
+
+ /*
+ * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+ * connecting to left PDB (Power Distribution Board).
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+
+ /*
+ * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+ * connecting to right PDB (Power Distribution Board).
+ */
+ i2c56 = &imux56;
+ i2c57 = &imux57;
+ i2c58 = &imux58;
+ i2c59 = &imux59;
+ i2c60 = &imux60;
+ i2c61 = &imux61;
+ i2c62 = &imux62;
+ i2c63 = &imux63;
+
+ /*
+ * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+ * connecting to top FCM (Fan Control Module).
+ */
+ i2c64 = &imux64;
+ i2c65 = &imux65;
+ i2c66 = &imux66;
+ i2c67 = &imux67;
+ i2c68 = &imux68;
+ i2c69 = &imux69;
+ i2c70 = &imux70;
+ i2c71 = &imux71;
+
+ /*
+ * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+ * connecting to bottom FCM (Fan Control Module).
+ */
+ i2c72 = &imux72;
+ i2c73 = &imux73;
+ i2c74 = &imux74;
+ i2c75 = &imux75;
+ i2c76 = &imux76;
+ i2c77 = &imux77;
+ i2c78 = &imux78;
+ i2c79 = &imux79;
+
+ /*
+ * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+ * to PIM (Port Interface Module) #1 (1-based).
+ */
+ i2c80 = &imux80;
+ i2c81 = &imux81;
+ i2c82 = &imux82;
+ i2c83 = &imux83;
+ i2c84 = &imux84;
+ i2c85 = &imux85;
+ i2c86 = &imux86;
+ i2c87 = &imux87;
+
+ /*
+ * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+ * to PIM (Port Interface Module) #2 (1-based).
+ */
+ i2c88 = &imux88;
+ i2c89 = &imux89;
+ i2c90 = &imux90;
+ i2c91 = &imux91;
+ i2c92 = &imux92;
+ i2c93 = &imux93;
+ i2c94 = &imux94;
+ i2c95 = &imux95;
+
+ /*
+ * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+ * to PIM (Port Interface Module) #3 (1-based).
+ */
+ i2c96 = &imux96;
+ i2c97 = &imux97;
+ i2c98 = &imux98;
+ i2c99 = &imux99;
+ i2c100 = &imux100;
+ i2c101 = &imux101;
+ i2c102 = &imux102;
+ i2c103 = &imux103;
+
+ /*
+ * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+ * to PIM (Port Interface Module) #4 (1-based).
+ */
+ i2c104 = &imux104;
+ i2c105 = &imux105;
+ i2c106 = &imux106;
+ i2c107 = &imux107;
+ i2c108 = &imux108;
+ i2c109 = &imux109;
+ i2c110 = &imux110;
+ i2c111 = &imux111;
+
+ /*
+ * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+ * to PIM (Port Interface Module) #5 (1-based).
+ */
+ i2c112 = &imux112;
+ i2c113 = &imux113;
+ i2c114 = &imux114;
+ i2c115 = &imux115;
+ i2c116 = &imux116;
+ i2c117 = &imux117;
+ i2c118 = &imux118;
+ i2c119 = &imux119;
+
+ /*
+ * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+ * to PIM (Port Interface Module) #6 (1-based).
+ */
+ i2c120 = &imux120;
+ i2c121 = &imux121;
+ i2c122 = &imux122;
+ i2c123 = &imux123;
+ i2c124 = &imux124;
+ i2c125 = &imux125;
+ i2c126 = &imux126;
+ i2c127 = &imux127;
+
+ /*
+ * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+ * to PIM (Port Interface Module) #7 (1-based).
+ */
+ i2c128 = &imux128;
+ i2c129 = &imux129;
+ i2c130 = &imux130;
+ i2c131 = &imux131;
+ i2c132 = &imux132;
+ i2c133 = &imux133;
+ i2c134 = &imux134;
+ i2c135 = &imux135;
+
+ /*
+ * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+ * to PIM (Port Interface Module) #8 (1-based).
+ */
+ i2c136 = &imux136;
+ i2c137 = &imux137;
+ i2c138 = &imux138;
+ i2c139 = &imux139;
+ i2c140 = &imux140;
+ i2c141 = &imux141;
+ i2c142 = &imux142;
+ i2c143 = &imux143;
};
chosen {
@@ -184,11 +340,16 @@
&i2c2 {
status = "okay";
+ /*
+ * I2C Switch 2-0070 is connecting to SCM (System Controller
+ * Module).
+ */
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ i2c-mux-idle-disconnect;
imux16: i2c@0 {
#address-cells = <1>;
@@ -269,29 +430,270 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ i2c-mux-idle-disconnect;
+ /*
+ * I2C Switch 8-0070 channel #0: connecting to left PDB
+ * (Power Distribution Board).
+ */
imux24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 8-0070 channel #1: connecting to right PDB
+ * (Power Distribution Board).
+ */
imux25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ i2c-switch@72 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux56: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux57: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux58: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux59: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux60: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux61: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux62: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux63: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 8-0070 channel #2: connecting to top FCM
+ * (Fan Control Module).
+ */
imux26: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux64: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux65: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux66: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux67: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux68: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux69: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux70: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux71: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 8-0070 channel #3: connecting to bottom
+ * FCM (Fan Control Module).
+ */
imux27: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux72: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux73: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux74: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux75: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux76: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux77: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux78: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux79: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
imux28: i2c@4 {
@@ -323,11 +725,16 @@
&i2c9 {
status = "okay";
+ /*
+ * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+ * (Switch Main Board).
+ */
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ i2c-mux-idle-disconnect;
imux32: i2c@0 {
#address-cells = <1>;
@@ -391,53 +798,534 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ i2c-mux-idle-disconnect;
+ /*
+ * I2C Switch 11-0070 channel #0: connecting to PIM
+ * (Port Interface Module) #1 (1-based).
+ */
imux40: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux80: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux81: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux82: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux83: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux84: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux85: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux86: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux87: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #1: connecting to PIM
+ * (Port Interface Module) #2 (1-based).
+ */
imux41: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux88: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux89: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux90: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux91: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux92: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux93: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux94: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux95: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #2: connecting to PIM
+ * (Port Interface Module) #3 (1-based).
+ */
imux42: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux96: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux97: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux98: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux99: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux100: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux101: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux102: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux103: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #3: connecting to PIM
+ * (Port Interface Module) #4 (1-based).
+ */
imux43: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux104: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux105: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux106: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux107: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux108: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux109: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux110: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux111: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #4: connecting to PIM
+ * (Port Interface Module) #5 (1-based).
+ */
imux44: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux112: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux113: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux114: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux115: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux116: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux117: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux118: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux119: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #5: connecting to PIM
+ * (Port Interface Module) #6 (1-based).
+ */
imux45: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux120: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux121: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux122: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux123: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux124: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux125: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux126: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux127: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #6: connecting to PIM
+ * (Port Interface Module) #7 (1-based).
+ */
imux46: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux128: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux129: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux130: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux131: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux132: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux133: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux134: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux135: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
+ /*
+ * I2C Switch 11-0070 channel #7: connecting to PIM
+ * (Port Interface Module) #8 (1-based).
+ */
imux47: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
+
+ i2c-switch@73 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux136: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux137: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux138: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux139: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux140: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux141: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux142: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux143: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
};
};
};
--
2.17.1
Powered by blists - more mailing lists