linux-kernel - Re: [PATCH v1 2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 11 Nov 2020 11:45:24 -0500
From:   Jim Quinlan <james.quinlan@...adcom.com>
To:     Sudeep Holla <sudeep.holla@....com>
Cc:     "maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE" 
        <bcm-kernel-feedback-list@...adcom.com>,
        Cristian Marussi <cristian.marussi@....com>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 2/2] firmware: arm_scmi: Augment SMC/HVC to allow
 optional interrupt

On Wed, Nov 11, 2020 at 5:42 AM Sudeep Holla <sudeep.holla@....com> wrote:
>
> On Tue, Nov 10, 2020 at 01:38:19PM -0500, Jim Quinlan wrote:
> > The SMC/HVC SCMI transport is modified to allow the completion of an SCMI
> > message to be indicated by an interrupt rather than the return of the smc
> > call.  This accommodates the existing behavior of the BrcmSTB SCMI
> > "platform" whose SW is already out in the field and cannot be changed.
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
> > ---
> >  drivers/firmware/arm_scmi/smc.c | 31 +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >
> > diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
> > index 82a82a5dc86a..3bf935dbd00e 100644
> > --- a/drivers/firmware/arm_scmi/smc.c
> > +++ b/drivers/firmware/arm_scmi/smc.c
> > @@ -9,9 +9,11 @@
> >  #include <linux/arm-smccc.h>
> >  #include <linux/device.h>
> >  #include <linux/err.h>
> > +#include <linux/interrupt.h>
> >  #include <linux/mutex.h>
> >  #include <linux/of.h>
> >  #include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> >  #include <linux/slab.h>
> >
> >  #include "common.h"
> > @@ -23,6 +25,8 @@
> >   * @shmem: Transmit/Receive shared memory area
> >   * @shmem_lock: Lock to protect access to Tx/Rx shared memory area
> >   * @func_id: smc/hvc call function id
> > + * @irq: Optional; employed when platforms indicates msg completion by intr.
> > + * @tx_complete: Optional, employed only when irq is valid.
> >   */
> >
> >  struct scmi_smc {
> > @@ -30,8 +34,19 @@ struct scmi_smc {
> >       struct scmi_shared_mem __iomem *shmem;
> >       struct mutex shmem_lock;
> >       u32 func_id;
> > +     int irq;
> > +     struct completion tx_complete;
> >  };
> >
> > +static irqreturn_t smc_msg_done_isr(int irq, void *data)
> > +{
> > +     struct scmi_smc *scmi_info = data;
> > +
> > +     complete(&scmi_info->tx_complete);
> > +
> > +     return IRQ_HANDLED;
> > +}
> > +
> >  static bool smc_chan_available(struct device *dev, int idx)
> >  {
> >       struct device_node *np = of_parse_phandle(dev->of_node, "shmem", 0);
> > @@ -79,6 +94,20 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
> >       if (ret < 0)
> >               return ret;
> >
> > +     /* Optional feature -- signal message completion using an interrupt */
> > +     ret = of_irq_get_byname(cdev->of_node, "msg-serviced");
>
> So, looks like it is mandatory if "interrupts" is used. Please update the
> binding or if that is not the practice followed elsewhere, drop search by
> name.

Well, I can certainly change the comment. I do not want it to be
"mandatory" if just interrupts are used.
 The reason I prefer using "interrupt-names" is that this allows
unforeseen use of future additional interrupts w/o caring about order
in the interrupts DT node.  If you are absolutely positive that there
will never be other interrupts used  in the future for the SCMI node
then I will drop it.

>
> Also I prefer full name "message-serviced" if possible, not strong
> opinion.

Will do.

>
>
> > +     if (ret > 0) {
> > +             scmi_info->irq = ret;
>
> May be set this only if we succeed setting up handler ? I mean move this
> down.

Will do.

Regards,
Jim Quinlan
Broadcom STB


>
>
> Other than these, the changes look fine.
>
> --
> Regards,
> Sudeep

Download attachment "smime.p7s" of type "application/pkcs7-signature" (4167 bytes)