[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201112045020.9766-10-f.fainelli@gmail.com>
Date: Wed, 11 Nov 2020 20:50:19 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM IPROC ARM
ARCHITECTURE), Hauke Mehrtens <hauke@...ke-m.de>,
Rafał Miłecki <zajec5@...il.com>,
netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list),
Kurt Kanzenbach <kurt@...-computers.de>
Subject: [PATCH v2 09/10] ARM: dts: NSP: Provide defaults ports container node
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@...00: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++++
arch/arm/boot/dts/bcm958622hr.dts | 3 ---
arch/arm/boot/dts/bcm958623hr.dts | 3 ---
arch/arm/boot/dts/bcm958625hr.dts | 3 ---
arch/arm/boot/dts/bcm958625k.dts | 3 ---
arch/arm/boot/dts/bcm988312hr.dts | 3 ---
6 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 09fd7e55c069..b4d2cc70afb1 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -420,6 +420,10 @@ srab: ethernet-switch@...00 {
status = "disabled";
/* ports are defined in board DTS */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
i2c0: i2c@...00 {
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index a49c2fd21f4a..83cb877d63db 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -176,9 +176,6 @@ &srab {
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
label = "port0";
reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index dd6dff6452b8..4e106ce1384a 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -180,9 +180,6 @@ &srab {
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
label = "port0";
reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a71371b4065e..cda6cc281e18 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -195,9 +195,6 @@ &srab {
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
label = "port0";
reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 7782b61c51a1..ffbff0014c65 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -216,9 +216,6 @@ &srab {
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
label = "port0";
reg = <0>;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..3fd39c479a3c 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -184,9 +184,6 @@ &srab {
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
label = "port0";
reg = <0>;
--
2.25.1
Powered by blists - more mailing lists