linux-kernel - Re: Question: gadget: How to realize uvc and uac composite function?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAGaOi3ZLiVUBaTX=humCVYp-tU1L61iY64HUCShfSeY38SZZsA@mail.gmail.com>
Date:   Thu, 12 Nov 2020 12:02:00 +0800
From:   app l <lipc198702@...il.com>
To:     balbi@...nel.org
Cc:     gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: Question: gadget: How to realize uvc and uac composite function?

Through the debug, the problem has been resolved, it can be recognized
normally, and the windows driver can be loaded normally, thank you

On Tue, Nov 10, 2020 at 10:28 AM app l <lipc198702@...il.com> wrote:
>
> Hi,
> Version: 4.9 and uac1 driver is V5.9. I tested it based on 4.9 with
> backported dwc3 driver frome v5.9.
> 1. According to configfs-usb-gadget-uvc, PC(Windows 10) can get ISO
> data normally;
> 2. According to configfs-usb-gadget-uac1, PC(Windows 10) can  install
> audio driver normally(AC Interface,/Captue Input terminal/Speaker);
> 3、uvc+uac1 composite device, PC(Windows 10) can get ISO data normally,
> but PC shows that the uac1 driver installation failed(AC
> Interface/Capture Inactive/Playback Inactive). AC Interface/Capture
> Inactive/Playback Inactive all show the device cannot start code 10,
> The settings of the I/O device are incorrect or the configuration
> parameters of the driver are incorrect. Through the USB analyzer to
> capture the packet, I found that the Index value seems to be wrong
> when PC host to get the descriptor. The acquisition is Playback
> Inactive and Capture Inactive, and the PC did not send the command
> packet about uac1. It is difficult to debug it.
> I suspect that some parts of the uac1 descriptor need to be modified,
> but I don’t know which one to modify.
> I sincerely hope that everyone can give some suggestions or related
> patches to help me. Thanks very much!
>
> Regards,
> pengcheng