[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201112095821.27110-1-wan.ahmad.zainie.wan.mohamad@intel.com>
Date: Thu, 12 Nov 2020 17:58:19 +0800
From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>
To: kishon@...com, vkoul@...nel.org, robh+dt@...nel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
andriy.shevchenko@...ux.intel.com, mgross@...ux.intel.com,
lakshmi.bai.raja.subramanian@...el.com,
wan.ahmad.zainie.wan.mohamad@...el.com
Subject: [PATCH v3 0/2] phy: intel: Add Keem Bay USB PHY support
Hi.
Intel Keem Bay USB subsystem incorporates DesignWare USB3.1 controller,
an USB3.1 (Gen1/2) PHY and an USB2.0 PHY. It is a Dual Role Device
(DRD), operating as either a USB host or a USB device.
The patchset is tested on Keem Bay EVM.
Thank you.
Best regards,
Zainie
Changes since v2:
- Remove dependency on OF in Kconfig.
- Remove header file linux/of.h, and add linux/mod_devicetable.h.
- Add comments for each usleep_range() usage, provide reason for the
delay.
- Replace usleep_range(2, 10) with udelay(2), as per
Documentation/timers/timers-howto.txt.
- In _probe(), remove variable np and use dev->of_node directly.
Changes since v1:
- Remove 2 patches that had been merged.
- Rebased to v5.10-rc3.
- Add Rob's Reviewed-by tag in the first patch.
- Use ARCH_KEEMBAY in Kconfig.
- Update #include header; remove <linux/of_address.h>, and add
<linux/bits.h>.
- Remove unnecessary comments.
Wan Ahmad Zainie (2):
dt-bindings: phy: Add Intel Keem Bay USB PHY bindings
phy: intel: Add Keem Bay USB PHY support
.../bindings/phy/intel,phy-keembay-usb.yaml | 44 +++
drivers/phy/intel/Kconfig | 12 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-keembay-usb.c | 300 ++++++++++++++++++
4 files changed, 357 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
create mode 100644 drivers/phy/intel/phy-intel-keembay-usb.c
--
2.17.1
Powered by blists - more mailing lists