[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201112153537.22383-6-ceggers@arri.de>
Date: Thu, 12 Nov 2020 16:35:31 +0100
From: Christian Eggers <ceggers@...i.de>
To: Vladimir Oltean <olteanv@...il.com>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Richard Cochran <richardcochran@...il.com>,
"Rob Herring" <robh+dt@...nel.org>
CC: Vivien Didelot <vivien.didelot@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Kurt Kanzenbach <kurt.kanzenbach@...utronix.de>,
George McCollister <george.mccollister@...il.com>,
Marek Vasut <marex@...x.de>,
Helmut Grohne <helmut.grohne@...enta.de>,
Paul Barker <pbarker@...sulko.com>,
Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>,
Tristram Ha <Tristram.Ha@...rochip.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Christian Eggers <ceggers@...i.de>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH net-next v2 05/11] dt-bindings: net: dsa: microchip,ksz: add interrupt property
The devices have an optional interrupt line.
Signed-off-by: Christian Eggers <ceggers@...i.de>
---
.../devicetree/bindings/net/dsa/microchip,ksz.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 431ca5c498a8..b2613d6c97cf 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -35,6 +35,11 @@ properties:
Should be a gpio specifier for a reset line.
maxItems: 1
+ interrupts:
+ description:
+ Interrupt specifier for the INTRP_N line from the device.
+ maxItems: 1
+
microchip,synclko-125:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -47,6 +52,7 @@ required:
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
// Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0 {
@@ -68,6 +74,8 @@ examples:
compatible = "microchip,ksz9477";
reg = <0>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* INTRP_N line */
spi-max-frequency = <44000000>;
spi-cpha;
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Powered by blists - more mailing lists